Features:
1: Wide range of applications
2: Simple operation
3: Long service life
4: Ultra-long transmission distance, the farthest transmission distance in the open field: 2 kilometers
 
Product name:
8ch 433M Lora remote control feedback point-to-point wireless IO switch relay module for smart home PTZ
(recommended to purchase both transmitter and receiver)
 
This is a wireless remote control switch with feedback function, no configuration is required, as long as the transceiver "band and ID" settings are consistent, it can be controlled. With feedback function, the LED indicator on the transmitter will indicate the switch status of the receiver.
 
Transmitter:
1. Working voltage: DC 12V (8-30V)
2. Working current: 12-30MA
3. input channels: 8 channels, low pulse trigger (NPN)
4. Transmit power: 22dBm
5. Working frequency band: 425~455MHz (can be set by DIP switch)
6. The farthest transmission distance in the open field: 2 kilometers
7. Size: 115x90x40mm (with shell)
8. Weight: 49g (without case) 120g (with case)
 
Receiver:
1. Working voltage: DC 12V (11-15V)
2. Working current: 12-260MA
3. output channels: 8 channels 10A relay output
4. Working frequency band: 425~455MHz (can be set by DIP switch)
6. The longest transmission distance in open field: 2 kilometers
6. Working modes: instantaneous (jog), self-locking, interlocking, delay (can be set
7. Dimensions: 145x90x40mm (with case)
Weight: 134g (without case), 200g (with case)
8. Maximum load: 10A/250VAC, 10A/125VAC, 10A/30VDC, 10A/28VDC, 10A/12VDC
 
The first use process:
1. Confirm that the frequency and ID of the receiver and transmitter are the same
2. Power on the receiver first, the PWR light is on
3. Power on the transmitter again, the PWR light flashes, the PWR light lights up and the receiver flashes at the same time, indicating that the pairing is successful.
4. At this point, the relay on the receiver can be remotely controlled through the input port on the transmitter.
 
Notice:
To install the antenna, remove the housing top cover and
The frequency or ID number cannot be the same when using two transmitters at the same time
The frequency or ID number cannot be the same when using two receivers
 
Package list:
1*Transmitter
1*Antenna
1*Receiver
1*Antenna
1*Transmitter
1*Receiver
2*Antenna
1*Antenna
 

We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.

Payment must be received in 5 business days of auction closing.

Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.

Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.

If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.

If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques