Feature
1: Simple assembly
2: The appearance is small and exquisite
3: Wide range of uses, game entertainment, security inspection, search of metal products on the body, etc.
4: High sensitivity
5: Soldering Learning DIY Kit
 
Specification
Supply voltage: DC3-5V
Battery model: CR2032 (not include)
Dimensions: 14.9*2.2CM
Uses: game entertainment, security inspection, search for metal products on the body, etc.
 
Purpose of this Metal Detector Principle
Example 1: If you want to detect whether there is a car passing by on a certain road, because the height of the car chassis is 0.5 meters or more from the road, and the cement will be buried at a depth of 5-10CM, so you can bury a coil with a diameter of 1 meter on the ground. Stable, accurate and reliable detection of whether there is a car on it is of great practical value in highway traffic statistics and parking lot prohibited area statistics.
Example 2: A sensor is required on each floor of the elevator controller to detect whether the elevator has reached the stop position. If a mechanical travel switch is used, there will be life and reliability factors; if a photocoupler is used, there will be a long time Dust deposition failure; therefore, the only way is to install a metal detector to determine whether the circuit is on or off based on the presence or absence of metal. This will have high practical value in many equipment and machines.
 
List
1 x PCB board
1 x 3V Buzzer
1 x 100UF25V electrolytic capacitor
1 x 220K 0.25W Resistor
1 x 2.2K 0.25W Resistor
1 x 100 ohm blue and white potentiometer
1 x 9018 triode
1 x 9015 triode
1 x 9012 triode
1 x 12D07 toggle open
1 x 2032 battery holder
2 x 104 ceramic capacitors
2 x 222 polyester capacitors

We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.

Payment must be received in 5 business days of auction closing.

Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.

Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.

If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.

If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques