7.2V 7.4V 2.2Ah /1.6Ah/4.4Ah 2S1P Li-ion rechargeable battery with PCM inside 8.4V charger
Attention please
You must use 8.4~8.5V charger to charge this battery.If your charger is 5V, you can not buy it and use!!!!
Description
There 're several items for your choice as below:
1pc 7.2V 2200mAh battery or 1pc 7.2V 2600mAh battery or
1pc 7.2V 2200mAh battery +JST SM connector wire or
1pc 7.2V 2600mAh battery +JST SM connector wire or
1pc 7.2V 1600mAh 18500 battery or
1pc 8.4V charger + DC connector
1pc 8.4V charger + mini USB connector
7.2V 2200mAh 186502S1P Specification (side by side)
Unit Over-charge protection----4.25±0.025V
Over-charge test delay time----700~1300ms
Unit over-charge release voltage----4.05±0.05V
Nominal charge current----less than 1820mA
Unit Over-discharge protection voltage----2.4±0.1V
Over-discharge test delay time----80~170ms
Unit over-discharge release voltage----3.0±0.075V
Discharge protection current ----3~6A
Protection release condition----off the load
Main circuit dynamics resistance---- VC=4.2V;RDS less than 60mohm
Self-discharge current----less than10µA
Dimension of pack----69mm(L)*38mm(W)*19mm(T) (for reference)
7.2V 2600mAh 186502S1P Specification (bar type)
Unit Over-charge protection----4.25±0.025V
Over-charge test delay time----700~1300ms
Unit over-charge release voltage----4.05±0.05V
Nominal charge current----less than 1820mA
Unit Over-discharge protection voltage----2.4±0.1V
Over-discharge test delay time----80~170ms
Unit over-discharge release voltage----3.0±0.075V
Discharge protection current ----3~6A
Protection release condition----off the load
Main circuit dynamics resistance---- VC=4.2V;RDS less than 60mohm
Self-discharge current----less than10µA
Dimension of pack----134mm(L)*38mm(D) ( reference)
ICR18500 7.2V 1600mAh battery Specification
Unit Over-charge protection----4.25±0.025V
Over-charge test delay time----700~1300ms
Unit over-charge release voltage----4.05±0.05V
Nominal charge current----less than 1.5A
Unit Over-discharge protection voltage----2.4±0.1V
Over-discharge test delay time----80~170ms
Unit over-discharge release voltage----3.0±0.075V
Discharge protection current ----3~6A
Protection release condition----off the load
Self-discharge current----less than 10µA
Dimension of pack----50mm*38mm*19mm (for reference)
Charger Description
Input:AC100-240V
Output: 8.4V 1A
AC: USB connector
DC: Micro USB connector or 2.1mm DC connector
Suitable for LCO/LMO/NCM 7.2V/7.4V Li-ion battery pack such as 2S 26650/2S 18650 /2S 18500 or 2S LiPolymer pouch, Li-ion battery pack
Manual
·if there is not battery, green LED on
·red LED on when charging
·green LED on when charge is full
·charging current is constant 1A, then constant voltage,
stop charging voltage is 8.4V.
Size for US type 74mm*(43+15.8)mm*28mm
for EU type 74mm*(43+17.8+18.2)mm*28mm
for GB type 74mm*70mm*50mm
for AU type 74mm*68mm*42mm
This charger plug is suitable for USA, EU, UK & Australia plug ,
other type plug should transfer plug to use.
Warning!!
Far from fire and damp
Don't disassemble charger to avoid electric shock.
Payment
We accept eBay Managed Payments
Shipment
- We only despatch your order to the shipping address you provide us via eBay Managed Payments for your security
-If you want to ship the goods via expedid shipping way, please contact with us via ebay message before ordering.
-Buyers are responsible for additional tax, customs fee and Duty for importing (if any).
Return Policy
----Customer Satisfaction is always our Top Priority.
----We will give a full refund only if the item you receive is different from the description. A refund will be given when the item is returned back to the store. Buyer should inspect the item upon receipt of the package. Contact us before return.
----Please contact us if you want to return item if you purchased wrong. For restocking fee and other fee, we will discuss friendly to solve.
----If you find the item is defective, we would offer exchange.
Returned item must be in original condition. Any item returned must be packaged completely, with all manuals, cables, accessories, software, etc.
Regardless of condition, all items must be packaged appropriately so as not to incur physical damage during return shipping. Damaged item can not be accepted.
----All faulty due to improper installation or improper use will NOT be responsible. Any physical damage will void your service too.
----It must be noticed within 3 days for any problem and returned within 14 days of receipt and in the same condition it was sent in. You must contact us before shipping any items back. For all cases, shipping fee is not refundable and buyer is responsible for the return shipping cost. We will not refund shipping costs.
----If you encounter any problems about anything, please feel free to send us inquiry and we will do our best to assist you to solve the issue.
Feedback
We will do our best to meet all the customer's requirement. It is very important for us to receive your satisfied feedback. If you are not satisfied with the items you received, please contact us before leaving negative feedback. We will work together to resolve any dispute.