![](https://www.etponline.com.au/assets/full/CHWINN.jpg?20210204030935)
the home of New & Used Engine Parts
Customer Support
Message UsETP's Aluminium Cylinder Head (bare) for Ford 302 Windsor - Sold individually. Buy two to make a set.
ETP Part Number |
CHWINN |
Make |
Ford |
Engine |
Windsor |
Number of Cylinder |
8 (V8) |
Number of Valves |
16 |
Fuel |
Petrol |
Fuel Delivery |
Carb |
Capacity |
5766 |
Valve Train |
OHV |
Years (From - To) |
1969 - 1970 |
|
|
Head Specs |
|
Chamber |
61cc |
Intake Port |
187cc |
Exhaust Port |
67cc |
Intake Valve Head Diameter |
2.055†|
Exhaust Valve Head Diameter |
1.6†|
Simple Purchase Process
There is NO requirement for you to send us your old head or parts. NO Exchange or Deposit is required. All that is required is for you buy the parts you need and we will have your purchase sent out on freight to you within 1 business day. Simple.
A little about us
All of our assembled heads sold via ETPonline are assembled here is Campbellfield Victoria (Australia). The cylinder head castings and other parts we assembled or sell on online have been imported to Australia through our own company in Shanghai, China. We setup ETP Automotive (Shanghai) in 2004 for the purpose of developing and controlling the quality of our parts to the high standard we needed. This quality gateway has been very successful and a huge benefit to our customers by allowing us to offer great quality parts at very competitive prices.
IMPORTANT
It is recommended to have your parts assembled and fitted by a qualified person. The warranty on these parts does not cover incorrect fitment or fitting mistakes. If you don't know what you're doing get someone who does.
FREIGHT NOTE
ETP will not be held responsible for missing freight. It is the buyers responsibility to follow up any missing freight. ETP will assist where possible, however ETP is limited to what the freight company can and cant achieve in the case of missing or lost freight. At the time the freight is booked you will receive the freight consignment number - this will be added to your eBay purchase history (if purchased via eBay) as confirmation the freight has been sent. You can use this consignment number to track the progress of your freight at the relevant website to the freight company used. Our freight is sent with either TNT or StarTrack for domestic sales. Australia Post and DHL Express are used for international purchases.
Ensure you enter the correct intended delivery address during the checkout process. Your purchase will be delivered to this address. We will not ship to any address other than what you nominated during check out. This is to protect both the buyer and the seller from fraudulent behaviour and is part of the eBay selling requirement and ETP's selling standard. If you've nominated an incorrect address please request a refund for this purchase. Once you have the refund back you can repurchase the part and add in the correct address.
Warranty
There is no warranty at all on used/second hand parts.
The Warranty Period for New Parts Purchased is either twelve (12) months from purchase date on the invoice or 50,000km after purchased part/s is/are installed (whichever occurs first). Where applicable, this warranty covers your purchase and/or labour against defective materials and/or workmanship during the warranty period on the basis that all of the fitting requirements and the OEM fitment procedure are met on installation and subsequent vehicle use.
For all details about our Warranty Policy please click on the Warranty Tab.
Turnaround
All orders are shipped within 1 business day - ETP is open Monday - Friday 8am - 4:30pm.
ETP use the following carriers to deliver our orders:
ETP will not be held responsible for missing freight. It is the buyers responsibility to follow up any missing freight. ETP will assist where possible, however ETP is limited to what the freight company can and cant achieve in the case of missing or lost freight.
Order Tracking
If a tracking # is provided by the shipping carrier, we will update your order with the tracking information. Please note that some orders using Australia Post will not have tracking numbers.
Shipping Rates
The rate charged for the shipping of your order is based on the weight of your products, and your location and packaging costs. Before the final checkout page you will be shown what the cost of shipping will be.
Accepted Methods of Payment
We accept:
How to Return an Item
Your item must be in its original unused condition to be returned, unless there is a manufacturing defect. You must return the supplied item within 7 days of the date of your purchase.
Warranty
Second hand parts carry NO WARRANTY. It is important you inspect the part correctly before fitment, and ensure it is correct for your application. Any failure of your engine due to use of Second Hand Parts is solely your responsibility.
Upon inspection, if you believe the used or new part you have purchased is not acceptable or suitable please send it back to us for a replacement or a refund. There is a 7 Day Limit from the day the part is purchased to when it can be refunded. After 7 days from purchase no refund will be given.
New Parts carry a 12 month warranty on non-commercial vehicles and a 6 month warranty on commercial vehicles.
If you have a failure and you believe it is a result of a NEW part you purchased from ETP please refer to our warranty section to find out what needs to happen next.
For any help please contact us via eBay messages
Warranty Terms and Conditions
Please Read This Before Installing Parts
ONLY NEW PARTS come with any warranty. Used or Second Hand parts are NOT. This warranty is for the original purchaser and is not transferable.
All Used Parts are sold suitable for reconditioning.
To Validate our warranty you must comply with every installation procedure and the Warranty Terms and Conditions.
If you’re not prepared to comply with any of the installation procedures and the warranty terms and conditions - DO NOT USE OUR PRODUCTS!
ETP Engine Parts Pty Ltd have supplied the product/s from our interpretation of the information the you the customer provided. However, it is the customers responsibility to compare the supplied components to the original part/s they are replacing to ensure compatibility and the required quality is correct.
Return your purchased items to the point of sale and a refund can be arranged (Conditions Apply) - Contact our sales team for details.
Please note: for warranty information on international orders please refer to the International Purchases sections at the bottom of the page.
Warranty Terms and Conditions
Any Problems - eBay message Us First for Assistance
We are here to help!
Our team has many years of experience in the automotive industry, they are here to help you with any issue with parts purchased from ETP Engine Parts. Messaging us for assistance will save you any unnecessary time or expense with may not be covered under the terms of our warranty.
Please eBay message us during business hours (7:30am to 5pm weekdays).
About This Warranty
The words ‘our’, ‘we’ and ‘the company’ in this document refer to ETP Engine Parts Pty Ltd. All our goods are supplied with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please note that the above clause only applies where you make a valid claim pursuant to the Australian Consumer Law. Without limiting the effect of the Australian Consumer Laws, ETP Engine Parts Pty Ltd may take into consideration the following non-exhaustive list of factors in assessing the validity of any claim made under the Australia Consumer Law, particularly where:
[i] There is in fact any fault of defect;
[ii] You change your mind;
[iii] ETP Engine Parts Pty Ltd bought to your attention any hidden defect before purchasing the part;
[iv] You examined the part before purchasing and/or fitment and should have noticed the fault;
[v] You used the goods in a manner which caused the goods to become unacceptable, damaged or to fail;
[vi] You took reasonable steps to avoid the quality becoming unacceptable, damaged or to fail;
[vii] It was reasonable for you to have relied on our skill or judgement when buying the goods; or
[viii] Something occurred which was beyond human control and that occurred after the part was supplied. In the event that the ETP Engine Parts Pty Ltd finds that any of the above have occurred, ETP Engine Parts Pty Ltd may investigate, oppose or defend that claim under Australia Consumer Laws.
Correct Product Fitment and Installation Procedures
[i] You must fully comply with any fitting requirements provided with your purchase.
[ii] If no fitting requirements have been provided, you must use your best endeavours to ensure that the parts are fitted with reasonable due care and diligence by a suitably qualified person and in accordance with the OE Manufactures instructions.
Warranty Excludes - This warranty does NOT apply to:
[i] Any part which has not been serviced in accordance with reasonable requirements and/or the manufacturer’s recommendation.
[ii] Any product which has been damaged due to the fault of any other product component.
[iii] Any product which has not been fitted in accordance with the listed Fitting Requirements.
[iv] Damage to the product from a failure of the owner to properly repair the product or any other product component which effects the product.
[v] Damage to the product due to airborne contamination (or ‘dusting’) entering the air intake system.
[vi] Damage to the product caused by operations a contradiction to the instrumentation/gauge warning devices (high water temperature and low oil pressure, etc.) and includes a ‘dry-start’ condition.
[vii] Damage to the part associated to the incorrect timing or caused by faulty ancillary components.
[viii] A part which is incorporated in a product which hand been fitted with an aftermarket turbocharger or supercharging system, or has been modified in any way to obtain additional horsepower/torque.
[ix] Transportation/freight damage: where ETP Engine Parts Pty Ltd has organised the freight and also included the freight charge on the sales invoice, you have enjoyed the benefits of cheaper freight rate due to our established bulk freight rate. However, ETP Engine Parts Pty Ltd are not the carrier and therefore, will not be held responsible for any damage or loss incurred in the transportation process. All claims are to be taken directly with the Freight forwarder concerned. ETP Engine Parts Pty Ltd cannot guarantee that their decision will be in your favour.
[x] Products installed into marine and industrial engines which have not been run-in on a dynamometer.
[xi] Any product incorporated into an engine which is found to have been over-sped/over revved, over loaded/lugged, or not serviced in accordance with the manufacturer’s service intervals. [xii] Freight charges, travelling time for mechanics, fault find or diagnosis time, towing, demurrage, downtime and charges for hire vehicles are not covered under ETP’ Engine parts Pty Ltd’s warranty and such charges will not be reimbursed, regardless of the circumstances.
[xiii] Labour charges exceeding the established rate of $70 per hour, or specified by the VACC/MTA recommended hourly rate, and job times in excess of job time frames established by the VACC.
[xiv] Unauthorised repairs, alterations or dismantling of any description.
[xv] Wear and tear from normal operation.
[xvi] Second hand/used parts. The warranty only covers new parts/unused parts.
Warranty Period
There is no warranty at all on used/second hand parts.
As specified warranty period for new parts can be stipulated on the Tax Invoice. Where there is no Warranty Period on the Tax Invoice, The Warranty Period is either twelve (12) months from purchase date on the invoice or 50,000km after PURCHASE part is installed. Where applicable, this warranty covers your purchase and/or labour against defective materials and/or workmanship during the Warranty period on the basis that all of the Fitting Requirements and the OEM fitment procedure are met on installation and vehicle use.
IMPORTANT
All claims will require detailed invoices/receipts proving that all our conditions were met at the time of the product installation. Failure to produce this evidence upon filling the Warranty Claim Form will void warranty entitlement. The completed Warranty Claim for will be required thirty (30) days from alerting ETP Engine Parts Pty Ltd of the issue.
Warranty Benefits
Parts:
ETP Engine Parts Pty Ltd will supply free of charge all components required to rectify any authorised claims and also reserves the right to supply used components in certain circumstances.
Labour:
Labour rates and repair times have been set by ETP Engine Parts Pty Ltd at $70 per hour, or based on the VACC/MTA Standard Time information, to accommodate repairs undertaken outside of our workshop. Any ‘out of workshop repair’ which exceeds $70 per hour or the VACC hourly rates and times will not be reimbursed, regardless of circumstances.
Reimbursement of cost to Purchaser:
If the part has been inspected by ETP Engine Parts Pty Ltd and has been deemed warrantable by us, ETP Engine Parts Pty Ltd may in its absolute discretion reimburse reasonable charges for outside preliminary inspections, the product’s removal and it’s return cost.
Exclusion of warranty benefits:
ETP Engine Parts Pty Ltd will not recognise or be held responsible for time spent fault finding and/or diagnosis, towing charges, travelling time, demurrage OR down time, loss of profits, consequential damage or loss. ETP Engine Parts Pty Ltd cannot be held responsible for any implied or verbal representations outside the invoice description of the goods sold and warranted. ETP Engine Parts Pty Ltd will not recognise a claim where the failure or defect is cause by: [i] The non compliance of compulsory fitting requirements, or [ii] The conditions as outlined under our warranty exclusions.
If you’re not prepared to comply with any of the installation procedures and the warranty terms and conditions - DO NOT USE OUR PRODUCTS!
Return your purchased items to the point of sale before fitment or buildup and a refund can be arranged (Conditions Apply) - Contact our sales team for details.
Returns will not be accepted after fourteen (14) days from invoice date. A 15% handling charge will be applied to all returned items.
Making A Claim
Customer’s responsibilities and entitlements:
[i] In the unlikely event any preliminary signs of malfunction within the Warranty Period, the purchaser/operator must:
Failure to comply with this condition could result in more serious consequential damage to the product and will void any warranty entitlement.
[ii] The purchaser/operator must send ETP Engine Parts Pty Ltd a completed Warranty Claim Form as soon as reasonably possible via fax, email or post after discovering any signs of a malfunction. To get a Warranty Claim Form please contact ETP Engine Parts Pty Ltd via eBay messages (between 7:30am to 5pm weekdays - AEST). A form will be posted/emailed to you and reference number provided.
[iii] ETP Engine Parts Pty Ltd will require the product to be returned for inspection at your cost with the completed Warranty Claim Form. Please ask ETP Engine Parts Pty Ltd for clarification on what will be need to be returned for inspection. Contact us via eBay messages.
[iv] Liability under Warranty Claim will not be accepted by ETP Engine Parts Pty Ltd until the product has been inspected by our Warranty Inspection Team and deemed warrantable.
[v] If ETP Engine Parts Pty Ltd does not accept liability for the Warranty Claim, we may in its absolute discretion recover any reasonable out-of-pocket expenses incurred in relation to the Warranty Claim, including but limited to the towing, freight, dismantling, laboratory cost and inspection process, such costs to be reimbursed by the customer prior to deliver of the unit and only cleared funds will be accepted as payment.
[vi] If ETP Engine Parts Pty Ltd accepts liability under the Warranty Claim, we will (if possible) within a reasonable time propose alternative repair measures to the purchaser. The Purchaser must accept one of the repair measures proposed by ETP Engine Parts Pty Ltd within a reasonable time.
[vii] If the purchaser proposes an alternative repair measure which is not endorsed by ETP Engine Parts Pty Ltd, we may at our absolute discretion undertake repair work in accordance with the purchaser’s proposed repair measures.
[viii] The Purchaser must not engage any third party repairers to undertake warranty repair work without written authorisation from ETP Engine Parts Pty Ltd to the commence repairs which may include labour charges fixed at standard factory amount and at an hourly rate stipulated by our Warranty Team.
[ix] If ETP Engine Parts Pty Ltd instructs or give authorisation for a warrantable repair to be undertaken by a third party repairer, ETP Engine Parts Pty Ltd does not provide any warranty for such work undertaken by the third party repairer.
[x] If there is a dispute arising in relation to liability or the quantum of the Warranty Claim, a mutually acceptable third party expert opinion may be obtained at the purchaser’s expense. The third party Engineer must be from the MVRIA or the Office of Fair Trading or be a recognised Automotive Consultant with membership of the SAE and IAME.
[xi] Any Opinion expressed or determination made by the third party expert shall not bind ETP Engine Parts Pty Ltd or the purchaser.
[xii] If ETP Engine Parts Pty Ltd declines the Warranty Claim, but if used as the repairer, the purchaser must sign a release form prior to the commencement of the repair. Cleared funds will only be accepted as payment.
International Purchases
International Purchases are identified by order that are delivered to areas outside of Australian territory.
All international purchases carry a 12 month replacement warranty of the parts purchased from ETP only. The 12 month period is from the date of purchase. The warranty covers a failure due to a manufacturing issue of the parts purchased from ETP. If the purchaser believes the part has failed due to a manufacturing issue, they will need to freight all parts supplied by ETP back to our Melbourne factory for inspection. If the inspection deems (without uncertainty) the parts failed due to a manufacturing issue, the return freight cost will be paid to the buyer and replacement parts will be sent. If the inspection deems the parts did not fail due to a manufacturing defect it is up to the buyer to decided if they want to retain the failed parts or have ETP scrap them. They will have 7 days to decided from the time ETP reports the findings.
ETP does not cover returned cost for incorrectly order parts. This includes fitment information differences in the buyers country to Australia.
ETP does not cover lost freight items or damaged in transit items - It is up to the buyer to have shipping insurance on the item/s if they want coverage.
At time of shipment ETP will supply the buyer with freight tracking information so they can track the progress of the item. The buyer will have the ability to contact the freight company using this tracking number.
For any help please contact us via eBay messages