AB PULSe 4K Receiver

The PULSe 4K mini (version: 1x DVB-S2X tuner) is a receiver with UHD resolution, ENIGMA 2 operating system and a minimalist design. The beautiful picture in 4K resolution is breathtaking, as are the HDR / HDR10 and HLG picture standards. Performance and picture speed are ensured by a 15,000 DMIPS quad-core processor, 8GB of FLASH memory and 2GB of DDR4 RAM. The receiver has a built-in DVB-S2X tuner. The slim and minimalist design of the receiver fits into any living room. On the front panel is an LED light that indicates whether the receiver is on, off or in standby mode. The LED light can be turned off completely if necessary. On the back there is a built-in DVB-S2X satellite tuner, 1x slot for a card reader, 1x slot for a CI module, 1x slot for a microSD card, 1x USB 3.0, 1x USB 2.0. The connection equipment also includes an optical digital audio output S/PDIF, RJ45-Ethernet, an infrared sensor (supplied with the receiver) and an input for an external 12V-2A DC power source.

In addition to storing recordings on an internal 2.5-inch hard drive, you can also opt for the more elegant solution of a microSD card. The microSD card completely replaces the functions of the internal hard drive and, most importantly, eliminates the unwanted noise of a traditional 2.5-inch hard drive. The PULS 4K MINI receiver can also be controlled by cell phone. You can also use your cell phone or tablet as a remote control.

PULSe 4K (version: 1x DVB-S2X tuner) is a receiver with UHD resolution and ENIGMA 2 operating system. The beautiful picture in 4K resolution is breathtaking, as are the HDR / HDR10 and HLG picture standards. Performance and picture speed are ensured by a 15,000 DMIPS quad-core processor, 8GB of FLASH memory and 2GB of DDR4 RAM. The receiver has a built-in DVB-S2X tuner and a slot for a second DVB-S2X plug & play satellite tuner or a DVB-C/T2 tuner for terrestrial and cable transmissions, so it is ready for satellite, terrestrial and cable transmissions from different operators. On the front is a 7-segment LED display. On the back are 1 card reader, 2 CI module slots, 1 USB 2.0 and 1 microSD card slot that you can use as internal memory for your recordings. One of the great advantages of this receiver is the simultaneous decoding of two CI modules or the real-time decoding of two broadcasts from one CI module, which anyone watching a live broadcast while recording another broadcast will appreciate. In addition, you can watch another TV show in real time on the other two mobile devices and a computer. 2 x mobile devices (multiple transcoding) 1 x PC (Internet interface) 1 x TV (HDMI)

Besides storing your recordings on the internal 2.5" hard drive, you can also choose the more elegant solution of a microSD card. The microSD card completely replaces the functions of the internal hard drive and especially eliminates the unwanted noise of a traditional 2.5" hard drive. MicroSD card capacity calculation: - on a 32GB microSD card, approximately. 13 hours of recording can be stored - on a 64GB microSD card, about 25 hours of recording can be stored - on a 128GB microSD card, about 50 hours of recording can be stored * The data is approximate and depends on the bit rate of the program you recorded with. Each program has a different bit rate. The PULS 4K MINI receiver can also be controlled by a cell phone. You can also use your cell phone or tablet as a remote control. You can see on your cell phone what is being broadcast on TV and set the recording on your PULS. Want to record a movie or your favorite show? With your cell phone, it's just a few clicks away. All recordings are saved on your PULS 4K MINI and you can watch them at any time with your cell phone or tablet, whenever you want. Once you've connected your TV to the tuner, it couldn't be easier to transfer the TV show to your mobile device. We recommend the dreamDroid app for Android devices. We recommend e2Remote Lite for Apple devices. You can also connect an external WiFi antenna to the receiver to establish a wireless internet connection.

PULSe 4K (version: 2x DVB-S2X tuner) is a receiver with UHD resolution and ENIGMA 2 operating system. The beautiful picture in 4K resolution is breathtaking, as are the HDR / HDR10 and HLG picture standards. Performance and picture speed are ensured by a 15,000 DMIPS quad-core processor, 8 GB of FLASH memory and 2 GB of DDR4 RAM. The receiver has two integrated DVB-S2X tuners, making it compatible with satellite transmissions from different operators. The front panel has a 7-segment LED display. On the back there is a built-in DVB-S2X satellite tuner and a slot for a second DVB-S2X tuner. In addition to the use of the microSD card as internal memory, the drawer system allows a 2.5" hard disk to be inserted into the receiver without any problems. In addition, there is an optical audio output S/PDIF, USB 2.0, RJ45-Ethernet, an infrared sensor (supplied with the receiver) and an input for an external power supply DC 12V-3A. One of the great advantages of this receiver is the simultaneous decoding of two CI modules resp. One of the great advantages of this receiver is the simultaneous decoding of two CI modules resp. the real-time decoding of two broadcasts from one CI module, which will be appreciated by anyone who watches a live broadcast while recording another broadcast. In addition, you can watch another TV broadcast in real time on the other two mobile devices and on a computer. 2 x mobile device (multiple transcoding) 1 x PC (Internet interface) 1 x TV (HDMI)

In addition to storing your recordings on an internal 2.5" hard drive, you can also opt for the more elegant solution of a microSD card. The microSD card completely replaces the functions of the internal hard drive and especially eliminates the unwanted noise of a traditional 2.5" hard drive. MicroSD card capacity calculation: - on a 32GB microSD card, approx. 13 hours of recording can be stored - on a 64GB microSD card, approx. 25 hours of recording can be stored - on a 128GB microSD card, approx. 50 hours of recording can be stored *The data is approximate and depends on the bit rate of the program you recorded with. Each program has a different bit rate. The PULS 4K receiver can also be controlled by cell phone. You can also use your cell phone or tablet as a remote control. You can see on your cell phone what is broadcast on TV and set the recording on your PULS. Want to record a movie or your favorite show? With your cell phone, it's just a few clicks away. All recordings are saved on your PULS 4K MINI and you can watch them at any time with your cell phone or tablet. If you have connected your TV to the tuner, there is nothing easier than transferring the TV show to your mobile device. We recommend the dreamDroid app for Android devices. We recommend e2Remote Lite for Apple devices. For wireless internet connection, you can also connect an external WiFi antenna to the receiver.

PULSe 4K (version: 1x DVB-S2X tuner + 1x DVB-T2/C tuner) is a receiver with UHD resolution and the ENIGMA 2 operating system. The beautiful picture in 4K resolution is breathtaking, as well as the HDR / HDR10 and HLG picture standards. Performance and picture speed will be provided by a 15,000 DMIPS quad-core processor, 8GB of FLASH memory and 2GB of DDR4 RAM. The receiver includes a built-in DVB-S2X tuner and a DVB-C/T2 terrestrial/cable tuner, making it ready for satellite, terrestrial and cable transmissions from different operators. On the rear panel you will find a built-in DVB-S2X satellite tuner and a slot for a second DVB-C/T2 terrestrial/cable tuner. In addition to using a microSD card as internal memory, you can easily insert a 2.5-inch hard drive into the receiver via the drawer system. In addition, you will find an optical digital audio output S/PDIF, a USB 2.0 port, an Ethernet RJ45 port, an infrared sensor (included in the receiver package) and an input for an external 12V-3A power supply. A great advantage of this receiver is the simultaneous decoding of two CI modules or real-time decoding of two programs from one CI module, which everyone will appreciate when watching a live broadcast and recording another program at the same time. In addition, you can watch another TV show in real time on two other mobile devices and a computer. 2 x mobile device (multiple transcoding) 1 x personal computer (web interface) 1 x TV (HDMI).

In addition to storing recordings on the internal 2.5" hard drive, you can also choose a more elegant solution, which is the microSD card. The microSD card fully replaces the functions of the internal hard drive and, most importantly, eliminates the unwanted sounds of a standard 2.5" hard drive. Calculation of microSD card capacity: - a 32 GB microSD card can store about 13 hours of recordings - a 64 GB microSD card can store about 25 hours of recordings - a 128 GB microSD card can store about 50 hours of recordings *The data is approximate depending on the bit rate of the program you recorded with. Each program has a different bitrate. The PULS 4K receiver can also be controlled with a cell phone. You can also use your cell phone or tablet as a remote control. You can see on your phone what is currently being broadcast on TV and set the recording on your PULS. Want to record a movie or your favorite TV show? With your cell phone you have a few clicks. All the recordings will be stored on your PULS 4K MINI and you can watch them anytime you want with your cell phone or tablet. If you have a combined TV and tuner, there is nothing easier than transferring the TV broadcast to your mobile device. We recommend the dreamDroid app for Android devices.We recommend e2Remote Lite for Apple devices. You can also connect an external WiFi antenna to the receiver for a wireless Internet connection.