We have Warehouse in Germany,so we will ship this product from Germany to you!!!
We will Ship from Germany Warehouse to below Europe Countries | ||||||
| Austria | Belgium | Bulgaria | Czech Republic | Croatia | Denmark | Estonia |
| Finland | France | Germany | Greece | Hungary | Ireland | Italy |
| Latvia | Lithuania | Luxembourg | Netherlands | Poland | Portugal | Romania |
| Slovakia | Slovenia | Spain | Sweden | UK | Malta | |
|
Package include:
1 x 3 Axis DIY Mini 3018 Pro Max CNC Engraver Milling machine kit with ER11 collet
1 x GRBL 1.1f Control Board
1 x 775 spindle
1 x Offline hand controller
10 x 20°0.1mm drill bits
4 x Plates
1 x Set of allen wrench
1 x Power Supply
1 x U Disk include user manual & grbl software
100% Brand New and High Quality!
product parameters
working area
30x18x4.5cm
Frame size
42x35x27cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
Windows XP/Win 7 / Win 8 / Win 10 / Win 11 (32/64 can be). Linux
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Product Description
How to use Offline Controller
- Main Page
1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.
- Control Page
1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press
- File Page
1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining
- How to increase/decrease the spindle power:
After pressing the spindle button, press and hold the OK button and the Z+/Z- button simultaneously to increase/decrease the speed.
About machine installation:
- Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual. In addition, we also have an assembly video, so users do not have to worry about not installing the machine.
- It should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines.
Parameters:
- Work area: 300x180x45 mm ((11.8 x 7.1 x 1.8”)
- Frame: 420x350x270mm (16.53x13.78x10.63”)
- Material: PA6 Nylon + Aluminum profile
- Power supply : 24V 5.6A power adapter (input voltage 110-240V)
- 775 Spindle motor: 12-24VDC 10000RPM
- Collet: ER11 3.175mm (Can be equipped with 0-7mm)
- Step motor: Nema17 stepper motor 1.3A, 0.25N.m
- Processing accuracy: About 0.2mm
775 SPINDLE MOTOR
- Power: 100W
- Speed: 10000RPM
- Collet: ER11
- large torque, low friction and stable operation.
- Double ball bearings have low noise.
Supported Engraving Materials:
- Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials.
- It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
GRBL Software
First install Win 8/10/11 under the support system, the re-install or exit the anti-viru soft ware and re-install.
With 10pcs 3.175mm Drill bits
- Tool holder diameter: 3.175mm/0.125in
- Material: Tungsten steel
- Blade length: 15mm/0.59in
- Total length: 38mm/1.5in
- Tip: 0.1mm/0.004inm
- Angle: 20°
New Fuction
Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.
Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.
Advantages:
- Add energency stop button interface.
- Increase optocoupler isolation: this spindle drive increase the optocoupler isolation, which makes the controler generate less heat and the spindle speed adjustment is more safer.
- Optimized the Z/Y/Z limit port, making wiring and operation easier.
- Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
- Add the power switch button, more safety in the process of using the machine.
More Fuctions
- Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.
- Enhanced spindle drive, can support up to 20,000 rpm spindle motor.
- Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.
- Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.
- Add the low noise fan port to force heat dissipation.
- Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.
Support Format flies
- Format flies that support 3-Axis engraving: Support G-code files of nc, ncc, tap, txt;
- Format flies that support 2-Axis engraving: Support nc, ncc, tap, G-code, ngc, png, jpg, gif, svg
product parameters
working area
30x18x4.5cm
Frame size
42x35x27cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
Windows XP/Win 7 / Win 8 / Win 10 / Win 11 (32/64 can be). Linux
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Product Description
How to use Offline Controller
- Main Page
1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.
- Control Page
1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press
- File Page
1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining
- How to increase/decrease the spindle power:
After pressing the spindle button, press and hold the OK button and the Z+/Z- button simultaneously to increase/decrease the speed.
About machine installation:
- Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual. In addition, we also have an assembly video, so users do not have to worry about not installing the machine.
- It should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines.
Parameters:
- Work area: 300x180x45 mm ((11.8 x 7.1 x 1.8”)
- Frame: 420x350x270mm (16.53x13.78x10.63”)
- Material: PA6 Nylon + Aluminum profile
- Power supply : 24V 5.6A power adapter (input voltage 110-240V)
- 775 Spindle motor: 12-24VDC 10000RPM
- Collet: ER11 3.175mm (Can be equipped with 0-7mm)
- Step motor: Nema17 stepper motor 1.3A, 0.25N.m
- Processing accuracy: About 0.2mm
775 SPINDLE MOTOR
- Power: 100W
- Speed: 10000RPM
- Collet: ER11
- large torque, low friction and stable operation.
- Double ball bearings have low noise.
Supported Engraving Materials:
- Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials.
- It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
GRBL Software
First install Win 8/10/11 under the support system, the re-install or exit the anti-viru soft ware and re-install.
With 10pcs 3.175mm Drill bits
- Tool holder diameter: 3.175mm/0.125in
- Material: Tungsten steel
- Blade length: 15mm/0.59in
- Total length: 38mm/1.5in
- Tip: 0.1mm/0.004inm
- Angle: 20°
New Fuction
Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.
Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.
Advantages:
- Add energency stop button interface.
- Increase optocoupler isolation: this spindle drive increase the optocoupler isolation, which makes the controler generate less heat and the spindle speed adjustment is more safer.
- Optimized the Z/Y/Z limit port, making wiring and operation easier.
- Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
- Add the power switch button, more safety in the process of using the machine.
More Fuctions
- Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.
- Enhanced spindle drive, can support up to 20,000 rpm spindle motor.
- Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.
- Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.
- Add the low noise fan port to force heat dissipation.
- Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.
Support Format flies
- Format flies that support 3-Axis engraving: Support G-code files of nc, ncc, tap, txt;
- Format flies that support 2-Axis engraving: Support nc, ncc, tap, G-code, ngc, png, jpg, gif, svg
product parameters
working area
30x18x4.5cm
Frame size
42x35x27cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
Windows XP/Win 7 / Win 8 / Win 10 / Win 11 (32/64 can be). Linux
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Product Description
How to use Offline Controller
- Main Page
1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.
- Control Page
1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press
- File Page
1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining
- How to increase/decrease the spindle power:
After pressing the spindle button, press and hold the OK button and the Z+/Z- button simultaneously to increase/decrease the speed.
About machine installation:
- Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual. In addition, we also have an assembly video, so users do not have to worry about not installing the machine.
- It should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines.
Parameters:
- Work area: 300x180x45 mm ((11.8 x 7.1 x 1.8”)
- Frame: 420x350x270mm (16.53x13.78x10.63”)
- Material: PA6 Nylon + Aluminum profile
- Power supply : 24V 5.6A power adapter (input voltage 110-240V)
- 775 Spindle motor: 12-24VDC 10000RPM
- Collet: ER11 3.175mm (Can be equipped with 0-7mm)
- Step motor: Nema17 stepper motor 1.3A, 0.25N.m
- Processing accuracy: About 0.2mm
775 SPINDLE MOTOR
- Power: 100W
- Speed: 10000RPM
- Collet: ER11
- large torque, low friction and stable operation.
- Double ball bearings have low noise.
Supported Engraving Materials:
- Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials.
- It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
GRBL Software
First install Win 8/10/11 under the support system, the re-install or exit the anti-viru soft ware and re-install.
With 10pcs 3.175mm Drill bits
- Tool holder diameter: 3.175mm/0.125in
- Material: Tungsten steel
- Blade length: 15mm/0.59in
- Total length: 38mm/1.5in
- Tip: 0.1mm/0.004inm
- Angle: 20°
New Fuction
Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.
Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.
Advantages:
- Add energency stop button interface.
- Increase optocoupler isolation: this spindle drive increase the optocoupler isolation, which makes the controler generate less heat and the spindle speed adjustment is more safer.
- Optimized the Z/Y/Z limit port, making wiring and operation easier.
- Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
- Add the power switch button, more safety in the process of using the machine.
More Fuctions
- Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.
- Enhanced spindle drive, can support up to 20,000 rpm spindle motor.
- Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.
- Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.
- Add the low noise fan port to force heat dissipation.
- Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.
Support Format flies
- Format flies that support 3-Axis engraving: Support G-code files of nc, ncc, tap, txt;
- Format flies that support 2-Axis engraving: Support nc, ncc, tap, G-code, ngc, png, jpg, gif, svg
working area
30x18x4.5cm
Frame size
42x35x27cm
Mesa
30x18cm
Spindle
775 spindle motor (12-36V) 24V: 10000r/min
Spindle Chuck
ER11
Step motor
Fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/M
Power supply
24V 5.6A
Software
GRBL controller
supported system
Windows XP/Win 7 / Win 8 / Win 10 / Win 11 (32/64 can be). Linux
Drill bits
tip 0.1mm ,20 degree , diameter3.175mm.the package include 10pc
Laser
Support laser
clamps
4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Product Description
How to use Offline Controller
- Main Page
1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.
- Control Page
1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press
- File Page
1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining
- How to increase/decrease the spindle power:
After pressing the spindle button, press and hold the OK button and the Z+/Z- button simultaneously to increase/decrease the speed.
About machine installation:
- Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual. In addition, we also have an assembly video, so users do not have to worry about not installing the machine.
- It should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines.
Parameters:
- Work area: 300x180x45 mm ((11.8 x 7.1 x 1.8”)
- Frame: 420x350x270mm (16.53x13.78x10.63”)
- Material: PA6 Nylon + Aluminum profile
- Power supply : 24V 5.6A power adapter (input voltage 110-240V)
- 775 Spindle motor: 12-24VDC 10000RPM
- Collet: ER11 3.175mm (Can be equipped with 0-7mm)
- Step motor: Nema17 stepper motor 1.3A, 0.25N.m
- Processing accuracy: About 0.2mm
775 SPINDLE MOTOR
- Power: 100W
- Speed: 10000RPM
- Collet: ER11
- large torque, low friction and stable operation.
- Double ball bearings have low noise.
Supported Engraving Materials:
- Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials.
- It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
GRBL Software
First install Win 8/10/11 under the support system, the re-install or exit the anti-viru soft ware and re-install.
With 10pcs 3.175mm Drill bits
- Tool holder diameter: 3.175mm/0.125in
- Material: Tungsten steel
- Blade length: 15mm/0.59in
- Total length: 38mm/1.5in
- Tip: 0.1mm/0.004inm
- Angle: 20°
New Fuction
Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.
Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.
Advantages:
- Add energency stop button interface.
- Increase optocoupler isolation: this spindle drive increase the optocoupler isolation, which makes the controler generate less heat and the spindle speed adjustment is more safer.
- Optimized the Z/Y/Z limit port, making wiring and operation easier.
- Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
- Add the power switch button, more safety in the process of using the machine.
More Fuctions
- Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.
- Enhanced spindle drive, can support up to 20,000 rpm spindle motor.
- Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.
- Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.
- Add the low noise fan port to force heat dissipation.
- Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.
Support Format flies
- Format flies that support 3-Axis engraving: Support G-code files of nc, ncc, tap, txt;
- Format flies that support 2-Axis engraving: Support nc, ncc, tap, G-code, ngc, png, jpg, gif, svg
Product Description
How to use Offline Controller
- Main Page
1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.
- Control Page
1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press
- File Page
1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining
- How to increase/decrease the spindle power:
After pressing the spindle button, press and hold the OK button and the Z+/Z- button simultaneously to increase/decrease the speed.
|
|
|
|---|---|---|
About machine installation:
| Parameters:
|
775 SPINDLE MOTOR
- Power: 100W
- Speed: 10000RPM
- Collet: ER11
- large torque, low friction and stable operation.
- Double ball bearings have low noise.
|
|
|
|---|---|---|
Supported Engraving Materials:
| GRBL SoftwareFirst install Win 8/10/11 under the support system, the re-install or exit the anti-viru soft ware and re-install. | With 10pcs 3.175mm Drill bits
|
New Fuction
Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.
Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.
|
|
|
|---|---|---|
Advantages:
| More Fuctions
| Support Format flies
|
GRBL controller Function:
SD
shows it is SD card condition, turn on power supply after insert SD
card, otherwise, it won't work. SD card capacity 4G could be
recognized.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Note:
To exit this page, should press back button longly. after exit, save
the current location as engraving starting point X0Y0Z0
Note: system can recognize max 100 available files one time (***.TXT***.txt***. NC***.nc***.CNC
***.cnc***.TAP***.tap could be recognized)，not support files with long name.
Press Y+ or Y- to choose files need to be engraved, press confirmation button to access engraving page.
Press ok to start engraving
If you want to stop during engraving, press back button longly, then back to the file selection page（machine will not stop at once, as GRBL controller has already saved a part of G code, will stop after carry out completely).
The
left words show the machine moving distances every time you press the
button on the condition of manually controlling, press Y+ or Y- to
choose, default 1mm each time.
Press X- or X+ for switchover setting.
The right words show Communication baud rate setting, default 9600
After setting, press confirmation button to save, then press back button to exit setting page.
Note:
the setting parameters can not be saved on the condition of electricity
outage, it will be default value when turn on next time.
GRBL controller Function:
SD
shows it is SD card condition, turn on power supply after insert SD
card, otherwise, it won't work. SD card capacity 4G could be
recognized.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Note:
To exit this page, should press back button longly. after exit, save
the current location as engraving starting point X0Y0Z0
Note: system can recognize max 100 available files one time (***.TXT***.txt***. NC***.nc***.CNC
***.cnc***.TAP***.tap could be recognized)，not support files with long name.
Press Y+ or Y- to choose files need to be engraved, press confirmation button to access engraving page.
Press ok to start engraving
If you want to stop during engraving, press back button longly, then back to the file selection page（machine will not stop at once, as GRBL controller has already saved a part of G code, will stop after carry out completely).
The
left words show the machine moving distances every time you press the
button on the condition of manually controlling, press Y+ or Y- to
choose, default 1mm each time.
Press X- or X+ for switchover setting.
The right words show Communication baud rate setting, default 9600
After setting, press confirmation button to save, then press back button to exit setting page.
Note:
the setting parameters can not be saved on the condition of electricity
outage, it will be default value when turn on next time.
GRBL controller Function:
SD
shows it is SD card condition, turn on power supply after insert SD
card, otherwise, it won't work. SD card capacity 4G could be
recognized.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Note:
To exit this page, should press back button longly. after exit, save
the current location as engraving starting point X0Y0Z0
Note: system can recognize max 100 available files one time (***.TXT***.txt***. NC***.nc***.CNC
***.cnc***.TAP***.tap could be recognized)，not support files with long name.
Press Y+ or Y- to choose files need to be engraved, press confirmation button to access engraving page.
Press ok to start engraving
If you want to stop during engraving, press back button longly, then back to the file selection page（machine will not stop at once, as GRBL controller has already saved a part of G code, will stop after carry out completely).
The
left words show the machine moving distances every time you press the
button on the condition of manually controlling, press Y+ or Y- to
choose, default 1mm each time.
Press X- or X+ for switchover setting.
The right words show Communication baud rate setting, default 9600
After setting, press confirmation button to save, then press back button to exit setting page.
Note:
the setting parameters can not be saved on the condition of electricity
outage, it will be default value when turn on next time.
GRBL controller Function:
SD
shows it is SD card condition, turn on power supply after insert SD
card, otherwise, it won't work. SD card capacity 4G could be
recognized.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Note:
To exit this page, should press back button longly. after exit, save
the current location as engraving starting point X0Y0Z0
Note: system can recognize max 100 available files one time (***.TXT***.txt***. NC***.nc***.CNC
***.cnc***.TAP***.tap could be recognized)，not support files with long name.
Press Y+ or Y- to choose files need to be engraved, press confirmation button to access engraving page.
Press ok to start engraving
If you want to stop during engraving, press back button longly, then back to the file selection page（machine will not stop at once, as GRBL controller has already saved a part of G code, will stop after carry out completely).
The
left words show the machine moving distances every time you press the
button on the condition of manually controlling, press Y+ or Y- to
choose, default 1mm each time.
Press X- or X+ for switchover setting.
The right words show Communication baud rate setting, default 9600
After setting, press confirmation button to save, then press back button to exit setting page.
Note:
the setting parameters can not be saved on the condition of electricity
outage, it will be default value when turn on next time.
GRBL controller Function:
SD shows it is SD card condition, turn on power supply after insert SD card, otherwise, it won't work. SD card capacity 4G could be recognized.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Note: To exit this page, should press back button longly. after exit, save the current location as engraving starting point X0Y0Z0
Note: system can recognize max 100 available files one time (***.TXT***.txt***. NC***.nc***.CNC
***.cnc***.TAP***.tap could be recognized)，not support files with long name.
Press Y+ or Y- to choose files need to be engraved, press confirmation button to access engraving page.
Press ok to start engraving
If you want to stop during engraving, press back button longly, then back to the file selection page（machine will not stop at once, as GRBL controller has already saved a part of G code, will stop after carry out completely).
The left words show the machine moving distances every time you press the button on the condition of manually controlling, press Y+ or Y- to choose, default 1mm each time.
Press X- or X+ for switchover setting.
The right words show Communication baud rate setting, default 9600
After setting, press confirmation button to save, then press back button to exit setting page.
Note: the setting parameters can not be saved on the condition of electricity outage, it will be default value when turn on next time.
Feedback:
We maintain hightest buyer ratings
> Positive Feedback will be much appreciated from you.
> Any dissatisfaction,please contact us immediately!
> Please do not leave neutral or negative feedback before we help you out.
Returns:
> Defect: We will fully refund or send you a new replacement,please contact and return within 30 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.
Contact us:
> If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.
