NON-EARTHED EURO SCHUKO 2 PIN PLUG TO SWISS 2 PIN MAINS POWER PLUG ADAPTER CONVERTER, 10A ~250V WHITE

Description:

The 2 Pin Swiss Converter Plug (SCH) is an adapter that converts the European Shuko plug to the Swiss CH-Type 11 plug format. The SCH conversion plug is designed and manufactured to meet the requirements of SEV 1011 and IEC 60884-1, and complies fully with the Low Voltage Directive 2014/35/EU and Swiss Regulations SR 734.26. The design of the clamping method ensures the European Shuko plug is permanently retained to the SCH.

Classification:
  • Adapter: Single portable
  • Normal use
  • Converts Non-Earthed European Shuko plug to the SEV 1011 (Swiss) format
  • Designed and manufactured to meet the requirements of SEV 1011 and IEC 60884-1
  • Complies fully with the LDV and Plug and Socket safety regulations
  • Clamping method ensures the European IEC 83:1975 Standard C 1b plug is permanently retained
  • Suitable for Class 2 devices (unearthed) only
  • Not Suitable for any other plug system
  • IEC 60884-1 – General requirements of plugs and socket-outlets for household and similar purposes
  • Supplied in a tight fitting tube, which comes off when the Schuko plug is installed
  • No loose parts
  • Available in white 
Certification:
  • Electrosuisse Certificate number IK-3611
Relevant Standards:
  • SEV 1011:09+A1:12 — Electrical Plugs and Sockets IEC 60884-1:2002/AMD2:2013 – General requirements of Plugs and Socket-outlets for Household and similar purposes
Rating:
  • Voltage 250V ac
  • Current 10 amps max
  • Load 2500 watts max
  • Frequency 60 Hz
  • Environmental Protection IP 3X (STD accessory rating)
  • Flammability V2 (external Casing)
  • Mechanical Strength 1000 grams @ 500mm
  • Colour White
  • Weight 30 grams typical
  • Finish Plain and fine sparkle
  • Retention Permanent by internal star washer
Note: - Tolerance as per relevant Swiss Standards

Safety Design Features:
  • SCH is supplied in a tight-fitting tube, which comes off following insertion of the Schuko plug
  • No loose parts
  • Plug features designed to meet the requirements of SEV 1011, and Swiss regulations SR 734.26 NEV.
  • Meets the requirements of IEC 60884-1.

Dimensions:
  • Width 37mm
  • Height 37mm
  • Overall length of SCH 57mm
  • Diameter of tube 41mm Length of tube 48mm Overall length of Tube and SCH 58mm
Fitting:

The 2 Pin Swiss Converter Plug (SCH) should be fitted as follows:
1. Do not remove the SCH from the tube at this stage
2. With the SCH still inside the installation tube place onto a firm flat surface and insert the Non grounded Schuko Plug into the SCH (see below).
3. Push the Schuko Plug fully home
4. Pull the assembly out of the tube
5. Ensure there is no visible gap between the SCH and the Schuko plug
6. Assembly complete

Service Conditions:
  • Temperature Range - Storage: -40 oC to +80 oC Ambient - Working: -15 oC to +35 oC 95% RH Ambient
  • Altitude 2000m above sea level max.
  • Not subject to exposure to direct radiation from the sun
  • Abnormal Condition - Avoid pollution by smoke, chemical and flammable fumes salt laden spray, periods of high humidity > 95% relative humidity (RH).


TO AVOID ANY MISUNDERSTANDING PLEASE ASK ANY QUESTIONS BEFORE YOU BUY

 

SERIOUS BUYERS ONLY

 

Please have a look at my other items as well! 


I always obtain a proof of posting and then leave the responsibility up to the PO to deliver!! If you wish postal insurance please ask before concluding the sale. For recorded delivery, Please add £1.49 to the postage. I dispatch all items within 1-2 working days of payment clearing. Paypal, postal order or Cheque  are acceptable methods of payment(For cheques, please allow 5-7 working days). Please complete checkout within 3 days of auction ending and payment must be received within 5 days. Feedback will be left once feedback is received.