2x RCF NX 912-A 12" Live Sound 2-Way Active Speaker 2100W w/ Integrated DSP MINT
Item Description
Package Includes
  • 2x RCF NX 912-A 12" DJ / Live Sound 2-Way Active Speaker 2100 Watts w/ Integrated DSP
  • 2x 25FT XLR CAble with Cable Ties
Features
  • Up to 130 dB Sound Pressure Level
  • 2100W Class-D Bi-Amplification
  • 50-20000 Hz linear frequency response
  • 1.75" Compression Driver
  • 12" Woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management

NX 912-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL of distortion-free sound. Used stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 912-A blends high-performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.

Power that moves

The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.

Superior transducers

Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The new 1.75" voice coil design with Polyimide-Kapton dome features a new bonding technology and reinforcement ribs making it 10 times more rigid than previous models, for increased accuracy and durability. The redesigned phase plug increases sound clarity with less distortion. Low-frequency transducer design gains more stability over higher currents, with less distortion and better heat handling.

Bass Motion Control

When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.

New perspective on linearity

RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

Specifications

Configuration
  • Active 2-Way
Enclosure Type
  • Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity
  • 2100 W Peak
Amplifier Power Rating
  • LF:
    1400 W Peak
    HF:
    700 W Peak
Amplifier Class
  • Class-D
Drivers
HF Driver
  • 1 x 1" / 25.4 mm Polyimide Compression Driver
HF Voice Coil
  • 1.75" / 44.45 mm
MF Driver
  • None
LF Driver
  • 1 x 12" / 304.8 mm Woofer
LF Voice Coil
  • 2.5" / 63.5 mm
Magnet
  • Neodymium
Performance
Frequency Response
  • 50 Hz to 20 kHz
Maximum SPL
  • 130 dB (Peak)
Coverage Angle
  • 100° H x 60° V
Input Sensitivity
  • +4 dBu to -2 dBu
Protections
  • RMS, Signal Limiter, Thermal
Connectivity
Audio I/O
  • 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
     1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O
  • None
USB
  • None
Wireless Connectivity
  • None
Signal Processing
Crossover
  • 1600 Hz (Internal)
EQ
  • None
Parametric EQ
  • None
Semi-Parametric EQ
  • None
Dynamic Processing
  • Soft Limiter
Alignment Delay
  • None
Phase Adjustment
  • None
Digital Signal Processing
  • FIR Filter, Venue Settings
Power
AC Input Power
  • 100 to 120 VAC, 60 Hz 
AC Power Connector
  • 1 x powerCON Input
Power Consumption
  • 300 W
Physical
Mounting
  • 2 x M10 Fly Point (Top)
     1 x M10 Fly Point (Each Side)
     1 x M10 Fly Point (Bottom)
     1 x M10 Fly Point (Rear)
     1 x Pole Socket (Bottom)
Handles
  • 1 x Each Side
Cooling
  • Convection, Heat Sink
Construction Material
  • Plywood, Stainless Steel Grille
Dimensions
  • 24.4 x 15.9 x 14.3" / 619.8 x 403.9 x 363.2 mm
Weight
  • 45.9 lb / 20.8 kg
Packaging Info
Package Weight
  • 52 lb
Box Dimensions (LxWxH)
  • 26.5 x 16.5 x 16.5"

About Us

About Us

VIP Pro Audio & DJ Equipment has been THE destination for DJ entertainment and lighting industry professionals for over 25 years, combining knowledge and experience with our highly specialized group of professionals to bring our loyal customer base the right, low-priced solution for every situation. From PA systems, turntables, and rack gear to cables, stands and subwoofers, VIP Pro Audio has all facets of the market covered! 

State-of-the-art equipment and the creative expertise that comes with selling products specifically designed for our customers? sound and lighting needs, we at VIP Pro Audio are never satisfied with the norm. From DJs and producers to rental contractors and lighting designers, we strive to provide our clients with innovative design ideas and the highest quality components at a low, competitive price.

Payment

We Accept: PayPal, Visa, Master Card, Discover, e-Check, PayPal Credit
Sales Tax: 8.875% if shipped to NY
Sales tax will not be charged unless your order is being shipped or picked up in NY.
Ship To locations: The United States, Canada, Worldwide
Most items will be shipped within 24 hours of receiving payment

Shipping

Nearly every order received by 3PM Eastern ships the SAME DAY!FREE shipping to lower 48 states.

- Our central location reaches most states in 1-4 business days
- 99.95% warehouse accuracy
- Expedited shipping available
We are proud to provide some of the fastest turnaround times on eBay. We use FedEx or UPS for most items, and USPS for smaller items. Residents of Hawaii, Alaska, and Puerto Rico should contact us for a shipping quote.

Returns

    
Exchanges

    
 You must e-mail us (vipproaudio@gmail.com) and receive return instructions if you receive a defective item 

         The item must
 be in the original packaging with all the accessories  included.  We 
reserve the right to have the unit exchanged or repaired  (up to 
manufacture).  Our warranty will not cover blown voice coils, or  
speakers with punctured surrounds.  This is considered physical damage  
and is not covered by a manufacturer warranty, or by our warranty.  No  
physical damage goods are warranted. DOA goods (physical) need to be  
claimed by shipping carrier. 

       

       Return for Refund

You must e-mail us vipproaudio@gmail.com
 and receive an RMA number, before returning. A 15% re-stocking fee will
  be applied in order to return an item for a refund.  Shipping costs 
are  never refundable, Item must not be used, and must be returned in  
original packaging with all accessories, within 7 days of the time you  
receive the item. (Items sold with "free shipping promotions" will have 
 the shipping cost deducted prior to the 15% restocking fee)

       

       For all returns, customer is responsible to ship item back (unless it is VIP fault or error)

Buy w/ Confidence

VIP Is The Place To Be...
- The Largest Selection Of Pro Audio, DJ & Lighting Equipment Unde One Roof.
- A Tradition Of Excellence Since 1988
- Celebrating 30 Years Of Commitment To Quality & Service.
- Proud To Be Most Awarded & Top Rated Dealer
VIEW ALL BRANDS
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.