Feature:
1.Three modes in one: Compared with common single function instrument,our P21 sets OBD,GPS and smart slope meter in one machine,Truly achieve a machine multi-purpose,to meet needs of a veriety of scenarios
2.OBD2+GPS dual system,universal for most of cars(OBD working mode can work on most cars after the year 2008). If Your Car's OBD2 Protocol is incompatible, then you can choose GPS working system, GPS mode can work with All Cars)
3.11 kinds of interfaces,one-click switch
4.With atmosphere light,red,blue,purple,it can be switched at will;it will be on after the power on,it will flash in red when there is an alarm and it is also can be turned off if you don't want
5.Built-in electronic slope meter,it can monitoring the pitch angle and tilt angle of your car in real time,provide the infomation of car's posture change for the outdoor cross-country and extreme crossing to ensure driving safety
6.Plug & Play: Start with the car and turn off with car's engine off
7.Two installation methods:1) stand on dashboard, 2) upside down on windshield
8.Built-in GPS+Beidou and Galileo chip modules,can receive up to 32 satellites,high-precision altitude,time,latitude and longitude,compass and other informatin to meet your outdoor,off-road,self-driving needs
This product reads the driving data of the car through the OBD2 interface of the car ECU, such as vehicle speed, rotation speed, fuel consumption, water temperature and voltage, etc., Instantly read driving information under the condition that drivers’ view does not shift during the driving of the car.To keep the drivers’ eyes on road always to avoid the dangerous of lowering down head.
This product does not rewrite any data in the ECU.
OBD mode function: vehicle speed, water temperature, voltage, fuel consumption, speed clock, single driving time, driving distance (single/cumulative), intake pressure, oil temperature, air fuel ratio, turbine pressure, altitude, driving direction, throttle inlet temperature, transmission temperature, engine load, up and down slope angle, left and right slope angle, acceleration test, brake test
Alarm: overspeed alarm, RPM alarm, water temperature alarm, voltage alarm, tilt alarm
GPS mode function: vehicle speed, voltage, satellite time, altitude, satellite number, driving direction, single mileage, driving time, up and down slope angle, left and right slope angle, acceleration test, brake test
Alarm: overspeed alarm, low voltage alarm, tilt alarm
Speed Alarm: Alarm when the vehicle speed >150km/h, the setting range is 5-200 km/h
Coolant Alarm: Alarm when the water temperature >120°C, the setting range is 50-200
RPM Alarm: Alarm when the engine speed >6000r/min, the setting range is 1000-8000
BAT alarm: Alarm when the voltage <10.5v, the setting range is 10.0-15.0v
Speed Adjust: Adjust the parameter value when there is an error between the speed and the instrument panel (for example, the instrument displays 100 Km/h and the device displays 105Km/h, and the parameter value is adjusted to 102 on the dial)
Speed Offset: When the vehicle speed does not return to 0 after the car is turned off
(If the vehicle speed shows 5Km/h, the equipment is adjusted to 6Km/h)
BAT Adjust: When there is an error between the voltage and the instrument panel voltage, fine adjustment can be made
(If the device displays 0.2V higher than the instrument voltage, the device is adjusted to 98%)
Engine Size: When the fuel consumption error is large, adjust according to the displacement
(If the car displacement is 3.6L, adjust the parameter value to 3.6L)
Fuel Adjust:Fine-tuning when there is an error in fuel consumption
(If the device displays 0.2L higher than the instrument voltage, the device is adjusted to 98%)
Brightness: Auto= Automatic light sensitivity, 1= The darkest, 8 =The brightest
Atmosphere: RPM = Speed control color-changing atmosphere light SPEED= Car speed control color-changing atmosphere light
OFF= Turn off the atmosphere light BLUE= Blue atmosphere light RED= Red atmosphere light PURPLE=Purple atmosphere light
CWT Unit：°C =Celsius °F =Fahrenheit
Speed Unit : Km/h= Kilometers MPH= Miles
Sum Distance: Synchronization of total mileage
(For example, the total odometer on the dashboard shows that you have driven 30010km, adjust the parameter value to 30010km)
Power Off Time: The default is 10 seconds to shut down, the adjustment range is 5-300 seconds
Sleep Voltage: Adjust to 13.2V or 13.6 when unable to shut down, adjust to COM mode for cars that start and stop automatically
Time Adjust: It can be adjusted to local time, the default time is China time (GMT+8)
Factory Set: The system restores to the factory preset values. After selecting this operation, short press“M”Button to confirm
Wide Compatibility: available for cars with OBD2 and EUOBD port, plug and play;
Attention:
The OBD2 mode are not compatible with following cars:
- European and American cars manufactured before 2008 and Asian cars manufactured before 2008.
- American cars produced before 2008 and all Dodge, JEEP, Sail, Chrysler cars.
- France cars manufactured by FAT,DS,PEUGEOT,Citroen,Renault,Simka, Amirka
-
Japanese cars: Suzuki, Mazda, Infiniti (QX50, Q50, Q501), Toyota
avanza 2013, Lexus (is250, ex250, ES300H), Honda (jazz, CRV) are not
compatible. And all Japanese cars before 2008 are not compatiable.
- Some models of Kia and Hyundai cannot use this OBD2 HUD (2013 Hyundai Sonata, 2017 Kia Soul PS, etc.)
- Oil-electric hybrid and some diesel vehicles cannot use OBD2 HUD, GPS HUD are recommended.
- Pickup Trucks and Modified ECU vehicles are not suitable for this HUD.
- GPS mode compatible with all vehicles.
If you are not sure this product is suitable for your car or not, please contact us before ordering, thank you!
Package Include:
1X HUD
1X OBD Cable
1X USB Cable
1X Bracket
1X Sticker
1X English Manual
