Midnite Solar MNHAWKE’S BAY 120 Hawke's Bay 600VDC MPPT Charge Controller 120A
*Hawke's Bay Breaker Box pictured in the second image is sold separately
Description: The Midnite Solar Hawke's Bay (MNHAWKE’S BAY 90) 600VDC MPPT Charge Controller 120A is the least expensive large output 600VDC MPPT charge controller either by itself or when outfitted with options!
The new built in talking MNGP2 graphics and programming module allows communication, monitoring and programming of all future MidNite products from a single unit.
The rotary dial provides easy access to all menus and devices on network as well as the selection of custom programming within the various sub-menus.
Options sold separate: Hawke's Bay Breaker Box, MNSPD-115 and MNSPD-600 (MNSPD-115 for Battery Side and MNSPD-600 for the PV Input Side)
FEATURES:
- Charges Lithium, Flooded Lead Acid, AGM and virtually any other chemistry.
- 600 operating voltage
- Max current out: 120 amps
- 185 to 585 volts dc operating range
- 3 Aux I/Os
- Remote Voltage sense
- Blue Tooth connectivity standard
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- New larger display with rotary knob for easier navigation of menus
- 48 Volt battery only
- Optional plug in Arc Fault, 2020 compliant ground fault and Rapid Shut down modules
- Solar, wind and hydro MPPT modes
Specifications:
- Nominal Battery Voltage: 48V
- Max Output Current: 90 or 120 amps depending on model
- PV Open Circuit Voltage VOC: 600VDC
- Power Conversion Efficiency: 98% (Typical system)
- Arc Fault and NEC 2020 Ground Fault Protection: Optional plugin modules - user installed
- Charging Regulation: Bulk, Absorb, Float as well as Equalization
- Battery Voltage Regulation Set Points: 40V to 65V
- Equalization Charging: Adjustable voltage and duration
- Battery Over Voltage: Fully protected (The optional Hawke's Bay Breaker Box automatically trips PV input breaker if battery exceeds 68VDC)
- Battery Short Circuit: Fully Protected
- Battery Temp Compensation: Automatic when BTS is installed. Adjustable mV per degree Cper 2V cell
- Programmable Auxiliary: 3 auxiliary inputs/outputs
- Graphic Display: MNGP2 - 64 x 122
- Stacking cables for system networking: Standard CAT5 - Canbus
- Communications: Canbus
- Remote Display: MNGP2 can be relocated and a second display can be added
- External Monitoring: Phone Application software allows local monitoring within normal blue tooth range from Hawke's Bay.
- Terminal Rating: 75C
- Data Logging: 380 days of daily history
- Wind and Hydro Applications: Coming soon (firmware up-gradable)
- Positive Ground Applications: Requires 2 pole input and output breakers
- Operating Temperatures: Minimum of -40C to 50C (controller will auto derate as temperature rises above 25C)
- Environmental Rating: Indoor Type 1
- Warranty: 5 Years
- Weight and Dimensions:17-5/8" x 9" x 8-1/8" 23 lbs
- Shipping Dimensions: 23" 15.05" x 11.05"
- Certifications: Listed by ETL for US (NOT LISTED FOR USE IN CANADA)
To ensure proper start up and MPPT operation, the minimum initial PV input voltage should be at least 30% higher than the highest expected battery voltage.
Ships with MidNite Battery Temperature Sensor (MNBTS) and printed Manual.
Warranty - 5 yrs
Made in the USA
California Residents: California Proposition 65 Warning