eBay

Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 23 years.

We do combined Shipping and send you a refund as soon as we do your orders.

If you don't see your Engine listed email me I have sets for most engines.

PLEASE CHECK FITMENT GUIDE BELOW

SAITO FA-120S (((NOTE))) OLD SAITO 120 uses a different Rear Bearing Email me before buying.

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA. I stock from 10 to 150 sets for all engines. Thanks, RC Engine Bearings

INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

ENGINE FITMENT BELOW

((( 16003 ))) NACHI ABEC3/c3 HD (OPEN) ID 17mm x OD 35mm x Width 8mm Dimensions

((( 6000-2RSEMQ ))) ABEC3/c3 (SEALED) ID 10mm x OD 26mm x Width 8mm Dimensions

MAGNUM POWER XL 180 RFS 180

OS 155 FS A (alpha) 4 Stroke
OS ENGINES 90 MAX
OS ENGINES FR5 5CYLND 4C 300
OS ENGINES FSR 91
OS ENGINES FSR 90
OS ENGINES FSR RC (LS) 91
SAITO 160
SAITO 180 4 STROKE 180
SAITO ALL MODELS 180
SAITO FA-120S   (((NOTE))) OLD SAITO 120 uses a different Rear Bearing Email me before buying so I can send the correct rear Bearing.
SAITO FA-125 125
SAITO FA-150 150
SAITO FA-180 180
SAITO FA-220A 4C WITH MUFFLER 220
SAITO FA-220A AAC GOLDEN KNIGHT W/M 220
SAITO S GOLDHEAD 120
WEBRA ALL MODELS 91

If you don't see your engine listed email me, I have sets for most engines.

Premium Upgrade Engine Bearings grade ABEC3 or better with C3 correct engine required clearance.

I'm VeriSign and PayPal Verified . I've been on Ebay 22+ years. We have the 5 Star rating on seller.com

I've rebuilt over 800 Model Engines if you need Help just email me.

The listing is for (2) NEW PREMIUM BEARINGS NACHI (Japan) / HCHEMQ HS).

( Nachi HD16003 ABEC3/C3 Open) ID 17mm x OD 35mm x Width 8mm Dimensions

( HCHSEMQ 6000 ABEC3/C3 Sealed ) ID 10mm x OD 26mm x Width 8mm Dimensions

REAR BEARING replaces OS # 27930000 16003 OPEN

FRONT BEARING replaces OS # 329431000 6000 SEALED

RC Engine BEARINGS with printed installation tips Instructions .

(1) REAR NACHI (Japan) premium Deep Groove ABEC3/C3 open high speed Bearing.

(1) Premium ABEC3/C3 FRONT True Seals EMQ Deep Groove Hi RPM Full Metal Cage Chromium Steel Sealed with Polyimide high temp Grease (Options/Seals (2) , Open or Seal on One Side) Ships Sealed.

Thanks again to all our regular and new Customers for our 5 Star seller.com Rating.

Engine BEARING Care and storage info.

Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.