eBay

Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 22 years.

We do combined Shipping and send you a refund as soon as we do your orders.

If you don't see your Engine listed email me I have sets for most engines.

PLEASE CHECK FITMENT GUIDE BELOW

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA.

INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

FITMENT GUIDE FOR THESE BEARINGS

YS	FZ 53	53
YS	FZ 63	63
YS	FZ 63S	63
YS	FZ 70	70

The listing is for (2) NEW PREMIUM Hi Speed BEARINGS, with installation Tip / Instructions .

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR PREMIUM ABEC3/C3 HC Chromium EMQ Deep Groove High Speed Full Metal Cage open Bearing (Note) if you want all sealed email before paying. Most engines use open rear bearings.

(1) FRONT PREMIUM ABEC3/C3 Deep Groove EMQ High Speed Full Metal Cage HC Chromium True Sealed with high temp Grease (Options/Seals (2) , Open or Seal on One Side) Ships with both Seals.

Bearing Type & Specs

16001 12x28x7

698 8x19x6

Quantity (1) Rear ABEC3/C3 Deep Groove Premium EMQ Hi RPM Bearing

Type Premium EMQ ABEC3/C3 Open (sealed on request)

Bearing Material: HC Chromium

Enclosure Open (sealed on request)

RPM Oil (x1000): 30

Quantity (1) Front Premium EMQ ABEC/C3 HC Chromium High RPM , can be run open or sealed on 1 side or both.

Testing Independent Endurance testing has verified our Premium bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name bearings

Thanks again to all our regular and new Customers for our 5 Star Seller.com Rating.

Engine BEARING Care and storage info.

Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.