1. CW 306 4 White pointed polisher
2. CW 311 4 White cone polisher
3. CW 351 4 White ball polisher
4. SH 320 3 Pink cup-shaped polisher
5. SH 341 3 Pink knife wheel polisher
6. SH 313 3 Pink pointed polisher
7. SH 320 4 Light blue cup-shaped polisher
8. SH 341 4 Light blue knife wheel polisher
9. SH 313 4 Light blue pointed polisher
Followed is the specific steps.
(Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
First step: Recommended speed:15000-20000; According to different parts,you can choose 1, 2 and 3 different shape polishers for rough polishing the surface.
Second step: Recommended speed:15000; According to different parts,you can choose 4, 5 and 6 different shape polishers for fine polishing.
Third step: Recommended speed:15000; According to different parts,you can choose 7, 8 and 9 different shape polishers for super-fine polishing.
Polishing RA 0304 Kit for Composite/Simple Polishing Kit for Composite RA 0304/
Composite resin polishing kit(Finishing by 2steps)
+
RA 0304
Feature:
This can be autoclavable,suitable for disinfection of high temperature at 135 ℃ without package box, conform to modern clinical requirement.
Model: RA 0304
Package:4pcs/kit
Net weight:25.5g
Size: 7*4.1*2.3cm
Material: silicone polishers
Used for Composite
Used for Handpiece type: low-speed contra handpiece
Includes:
2pcs white silicone polishers:SH3132, SH3202
2pcs blue silicone polishers:SH3134, SH3204
Usage:
Soft silicone polishers for porcelain
Instructions:
1. For dental clinic low speed bent hand piece.
2. Don’t use the products to sharp part, or it will damage the abrasive material.
3. Do not need to use with the polishing paste, do not need to apply too much pressure, Touch intermittent natural abrasive
Followed is the specific steps.
(Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect.
1. White silicone polishers = 1st step: Smoothing and pre-polishing. Rec. 10,000-15,000 rpm/min.
2. Blue silicone polisher = 2nd step: High gloss polishing. Rec.10, 000-12,000 rpm/min.
+
RA 14mm Wheel Dental rotary grinding and polishing instruments
1. Diamond impregnated 3-stage polishing system Coarse/Medium/Fine
（1. Smoothing. 2. Pre-polishing. 3.High-gloss polishing）
2. Best results, high efficiency
3. Applicable on composite,ceramic and Zircon
4. Recommend speed:7,000-12,000 rpm/min
Package: 6pcs/set
+Dental Diamond Burs Hidden Resin Base Polishing Kit for Low Speed HP 0412
Description：
Kit Profile：12 Silicone Polishers
1. SK 2132 Black pointed polisher *2
2. SK 2142 Black pointed polisher
3. SK 2022 Black bullet polisher
4. S K 2133 Green pointed polisher *2
5. SK 2143 Green pointed polisher
6. SK 2023 Green bullet polisher
7. SK 2135 Yellow pointed polisher *2
8. SK 2145 Yellow pointed polisher
9. SK 2025 Yellow bullet polisher
Followed is the specific steps.
(Note: Each step should be used at the recommended speed.)
First, adjust the nose to recommended speed, the polishers should be in the best condition and can achieve the best polishing effect
First step: recommended speed:15000-20000; According to different parts,you can choose 1,2 and 3 different shape polishers for rough
Second step: recommended speed:10000-15000; According to different parts, you can choose 4,5 and 6 different shape polishers for fine
Third step: recommended speed:8000-12000; According to different parts, you can choose 7,8 and 9 different shape polishers for super-fine
Package:
12pcs/kit
+
Dental composite finishing and polishing
Description:
Finishing and polishing of all composite restorations
Polishing of enamel after scaling
Removing excess cement after Orthodontic debanding
Removing surface stain without damaging the enamel
Finish for all types of composite restorations, simply by altering the contact pressure
Specially made for finishing and polishing of direct restorations
Technical:
Material：Silicone with Aluminium oxide
Recommended speed：7,000-10,000 rpm/min
Available in three different shapes
Size:6*11mm、6*10mm、10*7mm
Mandrel diameter：CA 2.35MM
134°C Autoclavable
Package:
Polisher：20pcs
Mandrel*1
