There are different variations of this kit listed, with the choice being dependent on the type of fitting (1/2" and 3/4" or self piercing tap for 15mm copper pipe), and the length of tubing to run from water source (5M or 10M), and whether a water filter is required to filter the water prior to dispensing at the fridge / fridge freezer.

Fitting is relatively simple.....

Connect to the cold water supply using the 1/2", 3/4" or self piercing tap.

Run the tubing to the fridge freezer (using the T connector or straight connector if needed)

Attach the stop tap, which is useful when you will need to replace the water supply

Attach water filter - making sure that the water flows in the direction of the arrow marked on the filter.

Run tubing to inlet on the fridge freezer.