Warm Tips
1. Do not place flammable and explosive materials within 5m of the product during use and do not place electronic devices close to the coil as this may cause interference with the metal and damage the device;
2. People implanted with life-supporting electronic devices such as pacemakers should not go near the device (10m range), as the working of the Tesla coil may cause such devices to fail;
3. Do not direct contact with limb parts during operation and commissioning, because the control and power output sections of the product are subject to voltages greater than the safe voltage;
4. There is a large capacity energy storage device in the product, after power failure it still has enough voltage to be lethal, when commissioning, the charge in the energy storage device should be released first. When equipped with a discharge element, wait for a few minutes before commissioning and prohibit manual short-circuiting of the discharge, which may damage the energy storage device.
5. Ensure that the experimental area is well ventilated as the solid-state Tesla coil generates a large amount of ozone during discharge.
6. A temperature protection switch that will automatically cut the circuit when the heat sink temperature is above 60°C. In this case, all power should be unplugged and left to stand for about 10 minutes until the temperature drops before use.
7. Due to the extremely fine diameter of the secondary coil, please avoid bumping it to avoid breaking the secondary coil winding.
8. The arcing distance must not be less than 50 mm, otherwise, the circuit may be overloaded and damaged (no prolonged arcing)
9. Do not modify it by yourself to avoid accidents.

Features

• Interface introduction: with power and frequency adjustment knob; 48V power input, and control switch, when the switch is placed on the left, it is in fixed frequency mode, when it is placed on the right, it is in music mode, and when it is placed in the middle, it is off.

   

• Fixed frequency mode: zero the power and frequency adjustment knob, place the control switch in the middle, then connect the power supply and toggle the switch to the left, the discharge tip will produce an arc.

   

• Music mode: set the power and frequency knobs to zero, place the control switch in the middle, then connect the power supply, use your mobile phone or other devices to search for the Bluetooth 'BT device' connection, then toggle the switch to the right to play square wave music, the discharge tip will generate an arc.

Parameters

• Audio input: Bluetooth(name: M18)
  
• Input voltage: DC48V
  
• Power supply: DC 5.5*2.1mm 
  
• Playable music format: square wave music
  
• Power: 0-100W
  
• Height: 90mm
  
• Diameter: 62mm
  
• Package dimensions: 175*170*40mm
• Net weight: 150g/0.33lb
• Package weight: 500g/1.10lb

Packing List

• 1*Set of Tesla Coil
• 1*Power Supply