You are looking at VARIOUS Vintage/Obsolete Aircraft Parts A4 F4 Douglas See Drop Down for Numbers for Part Numbers. All are new old surplus, if stamped, I will note below.

No certs.  Threads will be sleeved for protection in shipping.

Please contact me if you need exact dimensions.

Part Numbers and Descriptions are:
  • 2413209 - Swing Bolt - US Navy
  • 2669037 - Eye Bolt for Aft Fus Lower Access Door Cable Sup. (Material 4130) - for Douglas A4D-5
  • FD2997-17 - Eye Bolt - Davis Aircraft
  • 9668M95P24 - Retaining Nut - for General Electric
  • 32-65828 - Cylinder - B.L.C. Spring Cartridge - for McDonnell F4
  • 32-87031-11 - Latch Screw - Rack Assy, Flight Indicator for McDonnell F4 - 4130 Material 
  • 2678053 - Bearing Assy - Air Conditioning System Relief Valve-Douglas A4
  • 2556514 - Plate - Airstart Switch Over Center Adjusting 
  • LD122-0022-0943 - Flat Head Drilled Pin, Material A286, .620 Dia x 1.672 Length .141 Drill hole
  • 2443898-501, Cup Aileron Trim Actuator Oil Seal, for Douglas A4
  • 3822621-3, Plate for Switch Instl-Spoiler Indicator for Douglas A4, .50 wide by 1.63 length
  • 2443898-503, Cup Aileron Trim Actuator Oil Seal, for Douglas A4
  • 4671428, End-Rudder Tandem Cylinder for Douglas A4, Bronze, ID.566 OD.162
  • 3679218-11,Taxi Light Bracket Assy Piece for Douglas - STAMPED  
  • 2443872, Rod - Cockpit Flap, Cont, Upper Push-Pull for Douglas A4, Aluminum material
  • 4444673-5 Part of Bracket Assembly-Throttle Quandrant Inboard Support
  • 4822603-3, Support Plate for Indicator Switch, Spoiler for Douglas A4
  • 4446840 - Blank-Fwd Engine Support Fitting Forging for Douglas
  • 4444673-5 Part of Bracket Assy-Throttle Quandrant Inboard Support
  • 4827965-1 Support for Spoiler Indicator Switch for Douglas A4 - STAMPED  
  • 5822282 End Cap Assy-Trunnion End, Spoiler Actuator for Douglas - STAMPED     
  • 2806846 Elevation Adjustment Screw 304 SS Total Length 3.08", Drill hole .126, Thread .3750-24UNJF-3A
  • 2381538 Aluminum Plunger Wing Fuel Tank Drain for Douglas
  • 2827964 Plate-Spolier Indicator Switch Adjusting, for Douglas - STAMPED
  • 2824399, Alum Pin for Ejection Handle for Douglas A4
  • 641-8178 Thumbnut Holddown Knurled, Material 303, Dia .763, Height .47, holes-.062 for Rockwell International
  • 32-50019-3 Bolt-FWD Side Eng Mount for Douglas A4 - STAMPED
  • 32-84054-7 Eye Bolt - Mooring Tie Down Access Door for Douglas A4 - STAMPED    
  • 176944-2  Stud - Booster Control Valve Sleeve - for Lockheed P80A
  • 636609 Ferrule - Seal Ring, Pratt & Whitney
  • 346681 Stud - Oil Cooler Flap Actuator for Lockheed
  • 2668185-501 Washer-Throttle Friction for Douglas A4 - 1.125 width, 0.25 thickness, .390 diameter
  • 3-13462-1 Terminal, Wire Rope, Socket-Balance Spring, Canopy for Northrop Norair T38
  • 11559420 Threaded Drilled Eyebolt - Black Chromium Plated 304 SS
  • 3188711-1A Guide-Size 2, Direct Control Valve for Bendix Anodized Alum STAMPED
  • 3188711A    Guide-Size 2, Direct Control Valve for Bendix Anodized Alum STAMPED
  • 728265-1  Washer-Landing Gear Lockheed 
  • AN819-20D Sleeve Coupling Aluminum
  • LD137-0041-0897 Bushing -Clamp up Spacer
  • 809726-5 EyeBolt - AFT Tailpipe Support
  • AN43BC-12A EyeBolt STAMPED
  • 9815740-13 Plate
  • 2001767  EyeBolt
  • AN819-16D - Coupling Sleeve
  • AN819-2 - Coupling Sleeve
  • 5445832-3 Phenolic Insulator
  • 5445832-5 Phenolic Insulator
  • 32D390057-13 Eye Bolt for Clamp Assy-Center Engine Duct Guard for F4 McConnell
  • LD137-0029-0996 Bushing, Press-Fit Plain, North American Aviation 3"x 1/2" .686 OD STAMPED
  • 242182  Cap, Ferrule Diamond Knurl for Rocket Jet Eng. Corp 303 SS, Length .652 Thread 3/8-24 UNF-28
  • 32-69345-5 Rod End for End Assy-Rudder Hyd Damper McConnell (one Drilled and one Undrilled)
  • 1AMB 1N6-22 Nut Cylinder Lock for North American Aviation - Individually Packaged.
  • 75998 - Double-end threaded, drilled stud Measures 1.065 length
  • 4678506 Frame - magnesium
  • LD131-0023-0014 - Rod end with RH THD without KeyWay (Unsealed Bearing)
  • 2553360-501, 5553217 Hydraulic Reservoir Plate STAMPED 3 1/2" x 2 1/2"
  • 9667123-501 - Housing?  Stamped ~ 2 1/4" x 1"
  • 305-480221-5 Part of Bushing Assembly for Fuel Tank interconnect - Originally Made for the OV-10A Bronco North American Aviation, Inc. 3 1/2" height
  • 4577996-501, 5577945-5 Utility Reservoir Plate, 4577996-501 is stamped on the reverse side of the 5577945-5 Plate that measures 10" x 3 1/4"
  • 2665877 - Link-Canopy Operating External Handle
  • 1N6-38 Nut-Cylinder Lock 2 3/8-16 N-3B North American Aviation 3" Diameter Aluminum alloy-gray anodized
This is old surplus stock

There are NO material certifications for this part and no Warranty is issued or implied!!!! Buyer is solely responsible for application use. 

Please email us with any questions you may have.

MADE in the USA!!!!!!!!!!!!

 

Thank you for shopping with Anatase Products.