ASAHI 1251030 Gate Valve, 3" Pipe Size, Polypropylene, Flanged. New Surplus
ASAHI 1251030 Gate Valve, 3" Pipe Size, Polypropylene. *NEW SURPLUS*
- Gate Valve Connection Type: Flange
- Pipe Size Valves: 3 in
- Valve Stem Type: Non-Rising
- Top of Handle to Inlet Center: 12 51/64 in
- Inlet to Outlet Length: 8 in
- Stem Material: PVC
- Bonnet Style: Bolted
- Wedge Material: Polypropylene
- Seal Material: EPDM
- Handle Material: Polypropylene
- Handle Type: Hand Wheel
- Standards: NSF-61
The gate valve is the most widely used ON/OFF valve for large diameter, full port applications. When the valve is fully open, it allows straight-through passage through and opening that is essentially the same size as the inside diameter of the connecting pipe. This is why there is little pressure drop through an Asahi/America gate valve. The valve operates when the hand wheel and stem screw (or electric actuator) move a cylindrical plug, the gate, up and down at right angles to the fluid flow. Traditionally, gate valves have been used only for ON/OFF service, but because the unique Asahi/America sliding plug design provides a larger seating area than conventional gate valves, it can be used for throttling. This significantly larger seating area, which runs 360 degrees around the cylindrical plug, has also virtually eliminated the valve chatter normally associated with gate valves. Asahi/America gate valves feature a solid polypropylene plug with a non-rising stem design.
Ideal Applications Include:
- ON/OFF, chemical processing, aquariums, mining, water treatment, landfills
Features & Benefits:
- Straight-through flow with minimal pressure drop
- Unique sliding cylindrical plug design provides larger seating area than conventional gate valves
- Made of durable, corrosion resistant plastic
- No metal to media contact anywhere in valve
- Clean-out (drain) plug in bottom area of valve body
- Rated for full vacuum service
- Light weight for easier and economical installation
- Positive bubble-tight shut-off
- Visual position indicator
Gate Valves have minor scuffs and scratches, new surplus and haven't been used. If you have any questions, please ask before bidding.
Payment
Shipping
We accept payment by any of the following methods:
- PayPal
- All Major Credit Cards
- Checks
- Wire Transfers
We ship your order FAST!
Upon receipt, your order will be shipped within 24 hours (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it. *Note: you will be responsible to pay for return shipping
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
ASAHI 1251030 Gate Valve, 3" Pipe Size, Polypropylene, Flanged. New Surplus
ASAHI 1251030 Gate Valve, 3" Pipe Size, Polypropylene. *NEW SURPLUS*
- Gate Valve Connection Type: Flange
- Pipe Size Valves: 3 in
- Valve Stem Type: Non-Rising
- Top of Handle to Inlet Center: 12 51/64 in
- Inlet to Outlet Length: 8 in
- Stem Material: PVC
- Bonnet Style: Bolted
- Wedge Material: Polypropylene
- Seal Material: EPDM
- Handle Material: Polypropylene
- Handle Type: Hand Wheel
- Standards: NSF-61
The gate valve is the most widely used ON/OFF valve for large diameter, full port applications. When the valve is fully open, it allows straight-through passage through and opening that is essentially the same size as the inside diameter of the connecting pipe. This is why there is little pressure drop through an Asahi/America gate valve. The valve operates when the hand wheel and stem screw (or electric actuator) move a cylindrical plug, the gate, up and down at right angles to the fluid flow. Traditionally, gate valves have been used only for ON/OFF service, but because the unique Asahi/America sliding plug design provides a larger seating area than conventional gate valves, it can be used for throttling. This significantly larger seating area, which runs 360 degrees around the cylindrical plug, has also virtually eliminated the valve chatter normally associated with gate valves. Asahi/America gate valves feature a solid polypropylene plug with a non-rising stem design.
Ideal Applications Include:
- ON/OFF, chemical processing, aquariums, mining, water treatment, landfills
Features & Benefits:
- Straight-through flow with minimal pressure drop
- Unique sliding cylindrical plug design provides larger seating area than conventional gate valves
- Made of durable, corrosion resistant plastic
- No metal to media contact anywhere in valve
- Clean-out (drain) plug in bottom area of valve body
- Rated for full vacuum service
- Light weight for easier and economical installation
- Positive bubble-tight shut-off
- Visual position indicator
Gate Valves have minor scuffs and scratches, new surplus and haven't been used. If you have any questions, please ask before bidding.
Payment
We accept payment by any of the following methods:
- PayPal
- All Major Credit Cards
- Checks
- Wire Transfers
Shipping
We ship your order FAST!
Upon receipt, your order will be shipped within 24 hours (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it. *Note: you will be responsible to pay for return shipping
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.