Spacifications:
SATA 1 to 8 Way Cooling Fan Splitter Hub
Suit for 12V 3pin Cooling Fan (8 way total electric current ≤ 2A) or 12V 4Pin Cooler Fan (10 ways)
Power supply using IDE interface or SATA interface
Support the fan to start at the same time, solve the lack of motherboard interface, and focus on processing the fan wire
Back EVA double-sided adhesive, can fix the hub on the chassis
8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW), or turn off the fan.
Note: When the 8 way is in the low range, there is a fan with LED lights, and the brightness of the LED lights will be reduced or No bright.
A small part does not support the low-voltage starting fan, and it will not rotate in the low gear.
10-way CPU5 interface supports PWM function Automatic fan speed adjustment (PWM interface needs to be connected to the motherboard CPU FAN interface through a matched PWM cable, and requires the motherboard CPU FAN interface to support PWM function)
Product Size: 53*48mm (8 Ways)
Note: Only 10 way with PWM connection.
Need to implement PWM temperature control function conditions:
1. The fan is a 4pin PWM fan. This is very important. There are many motherboards with 4-pin connectors they atr not true PWM fan jacks. They are regulated by voltage and need attention. This type motherboard cannot implement PWM control fans.
2. Connect the 4-pin fan connector on the motherboard. The BIOS turns on the PWM function.
Package Included:
1 x 4Pin Cooling Fan Hub or SATA Cooling Fan Hub
