Interior KIT
for Rivarossi 85ft Heavyweight DINER [ HO ]
Miscellaneous
Railroad Company # 48Diner-RivHW
This KIT
consists of 2 pieces to be glued together to create the interior.
(Lead sheet is not included in the kit)
The two parts
fit together well, but you must glue them together.
“Super Glue”
works well, but see warning below.
Align the
parts with a ruler to keep them straight while gluing.
There are notches and holes in the floor to fit around the
various protrusions in the Rivarossi 85ft Heavyweight
DINER.
The injection marks in the center of the car floor need to be
removed and smoothed.
The interior was designed to accommodate the window and door
placements.
There may be
a little trimming, sanding or filing involved.
The interior has 12 tables and seating for 48 ”people”.
The sample pictures are of an unpainted interior.
The product
is manufactured from tan aliphatic
polyester resin and can be painted.
Recommend painting the appliances in the kitchen to represent
Stainless Steel.
The kitchen doors should be painted “Aluminum”.
The seats are
low, to allow for the installation of an LSW110 or LSW118 underneath for needed car weight.
[ LSW118 has been recommended for weight in Rivarossi passenger cars, however, LSW100 clears the window latches without trimming. LSW100 does not clear the vertical stiffeners. Use a hand-held single-hole punch to create the necessary holes and notches. ] Please note: LSW products are not included in the interior kits.
The
passenger’s feet and legs have to be trimmed.
You can see
the passengers through the windows; not their butts.
Standing people
should have their feet removed because the floor is also high.
The walls are low enough so that lighting may be added.
An instruction
sheet is included with every purchase.
Because of
the tables, the space for passengers is more limited.
Passengers
with things in their hands probably will not fit.
Some other
passengers may have to have back sides trimmed.
NMRA RP20
weight for this car (10 1/4 inches) ≈ 6.6oz.
The test car weight with 8 7/8inch of LSW118 yields 6.9oz with original Rivarossi
trucks.
Assembled
Length of the Interior = 9 7/8 inches; Width: 1 1/8th inch; Height = 21mm
Weight of the
Interior = .9oz.
PLEASE NOTE:
Each of our car interiors are made to fit
specific passenger cars as described.
Our interiors are generic; we are not following
a specific prototype railroad floor plan.
We take into account window placement of the
passenger cars and any protrusions or obstructions inside the specific car.
We strive to get it right so your cars will look
their best.
If you would like a passenger car interior that
we do not have available, please contact me before purchasing an interior and
hoping that it will fit your car.
We are always open to new product development
and ideas.
Thank you, Eric Haffner
I attempt to
provide the most accurate description possible.
My intention
is to prevent any surprises.
WARNING: CHOKING
HAZARD - Small Parts - Not for children under 14 years of age.
Your purchase
will come packed for damage-free inter-planetary shipment
If you have
any questions, PLEASE ask.
Thank you for
looking!
Please leave
a 5-Star review.
If you purchase
more than one item from me, I will combine shipping anywhere I safely can, and
refund the difference in shipping cost to you.
Interiors
currently available:
12Duplex-RivSS
for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car
24Comb-RivHW
for the Rivarossi 85ft Heavy-Weight Baggage-Combine Car
25Obs-RivCS
for the IHC / Rivarossi 85ft Corrugated-Side Observation Car
35Obs-RivSS for the Rivarossi 85ft Smooth-Side Observation Car (blunt-end tail car)
36Grill-RivCS for the Rivarossi 85ft Corrugated-Side Grill Car
42Obs-RivHW for the Rivarossi 85ft Heavy Weight Observation Car
48Diner-ConCS
for the Con-Cor 85ft Corrugated-Side Dining car
48Diner-RivHW
for the Rivarossi 85ft Heavyweight Dining car;
48Diner-RivSS for teh Rivarossi 85ft Smooth-Side Dining car;
52Coach-AthSL
for the Athearn 72ft Stream-Line Coach Car
54Coach-RivCS
for the Rivarossi 85ft Corrugated-Side Passenger car;
54Coach-ConCS
for the Con-Cor 85ft Corrugated-Side Passenger car.
58Coach-RivSS
for the Rivarossi 85ft Smooth Side Passenger car;
60Coach-AthHW
for the Athearn 72ft Standard Steel Coach (Heavy-Weight)
60Coach-RivHW
for the Rivarossi 72ft Heavy Weight passenger Car;
68Coach-IHCHW for the IHC 85ft Heavyweight Coach (Premier Series)
92Coach-Horizon for the early Walthers Horizon Coach Commuter car (Seats face rearward and forward)
96Coach-Horizon
for the early Walthers Horizon Coach Commuter car
Also
available:
LSW078, LSW100 and
LSW118 lead sheet for weight in passenger and freight cars.
Railing3 -
Railing for use on HO Walkways or on top of vertical cylindrical tanks.
TJ-R1 Truck
Jig for Central Valley Trucks
TJ-V2 Truck
Jig for Kadee Freight trucks
AHM, IHC, Con-Cor, seating, chair car, Rivarossi interior, detail,
partitions, passenger car
A note to buyers: if our stock is depleted and you wish to purchase a quantity greater than what is available, PLEASE contact me. Turn-around time to manufacture additional quantity of an item is usually less than two days.