Product Features:
Small size
Suitable for five types of light strips: monochrome, bicolor, RGB, RGBW, and RGBWC
Dimming and color tone are sensitive to touch and have a good hand feel
Convenient wiring
Easy to operate
Product Description:
The wireless iron shell 6-key full touch music synchronization controller is an LED controller that adopts advanced point control touch technology. There are five types of products available in this series, which are used to control five types of light strips: monochrome, color temperature, RGB, RGBW, and RGBWC; You can choose dynamic lighting effects such as gradient, jump, gradual dimming, flickering, burst, music mode, etc. according to different customer needs, as well as a variety of static colors to choose from. It can be widely used in home decoration, mall advertising, bar counter and other application places. It has the advantages of flexible wiring, convenient wiring, and simple use. This controller can be connected to each other through RJ45 network cables to achieve synchronous changes of more LED lights, theoretically connecting countless units.
Product parameters:
Working voltage: DC5-24V
Working temperature: -20-60 ° C
Output current/power:
Monochrome/RGB:
10A*3CH, 5V< 150W，12V< 360W, 24V< 720W
Dual color:
1 5A*2CH，5V< 150W, 12V< 360W, 24V< 720W
RGBW:
10A*4CH, 5V<200W, 12V< 480W, 24V< 960W\
RGBWC:
10A*5CH, 5V<250W, 12V< 600W, 24V< 1200W
Weight: 270 grams
Product size: L91 * W91 * H24MM
Packaging size: L190 * W125 * H34MM
POWER: Input power positive/negative
LED STRIPL LIGHT: Output light with positive pole/R/G/B
Signal IN: network interface signal input, Signal OUT: network interface signal output
POWER: power indicator light, Signal: signal indicator light
Please refer to the manual for detailed operation
Installation precautions:
1. This product should be debugged and installed by personnel with professional qualifications.
2. This product is not waterproof and needs to be protected from sunlight and rain. If installed outdoors, please use a waterproof box.
3. Good heat dissipation conditions will extend the service life of LED controllers. Please install the product in a well ventilated environment.
4. Please do not install or use this type of product in areas with lightning, strong magnetic fields, or high voltage.
5. Please check if the output voltage of the LED power supply used meets the requirements of the product voltage range.
6. The diameter of the wire used must be sufficient to load the LED lighting fixtures connected and ensure that the wiring is secure to prevent wires from passing through
Accidents triggered by heat or poor contact.
7. Before powering on and debugging, it is necessary to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.
Package List:
Control board *1
