Flexback carbon steel
All of our products are exclusively made in Germany
Bi-metal M42 HSS
Band saw blade Femi SN 120 XL
Precision in perfection: Our band saw blades are characterized by the highest quality and durability.
The bi-metal stamped, sharpened and welded in Germany!
With us you can buy high-performance bi-metal metal band saw blades with tooth tips made of HSS M42 and an alloyed heat-treated steel as the carrier band. Precision set, sharpened and welded, these blades are ideal for machining metal and difficult materials.
The areas of application for these saw blades are diverse: They are suitable for materials with a tensile strength of up to 1400 N/mm² (44 HRc) and can be used universally and independently of the machine for solid materials and profiles.
100% maggot in Germany
This saw blade is suitable for all metal band saws and is suitable for stainless steel and steel. The combi-toothing results in a smoother saw run and a high industrial quality.
They are also suitable for non-ferrous metals. The production takes place in Stuttgart and guarantees you a high quality of material.
Field of application summary: stainless steel steel metal | Manufacturing in Stuttgart High quality material Saw band suitable for all band saws Qualified for commercial or pastimes For all materials with onetensile strength of up to 1400 N/mm² (44 HRc) Non-ferrous metal cutting possible |
teeth per inch (tpi) | Tooth pitch in mm |
14 | 1.8 |
10 | 2.5 |
8 | 3.2 |
6 | 4.2 |
5 | 5.1 |
4 | 6.4 |
3 | 8.5 |
steel quality: HSS M42 and alloyed quenched and tempered steel
tooth shape: Standard or combination tooth
Execution: serrated, set, sharpened, welded
Do you cut curves? Here is a table to help:
The smaller the bandwidth, the tighter curves can be sawn.
Explanation of the dimensions of a band saw blade:
1. The band length
It's the part of the blade that actually cuts material. Band length varies depending on the size and model of band saw and can usually be in Customs or millimeter be measured.
2. The bandwidth
It's the part of the blade that cuts the material. Band width varies by band saw size and model and can usually be in Customs or millimeter be measured. The wider the blade, the greater the depth of cut and the more material that can be cut at once.
However, it is important to ensure that the blade width matches the size of the band saw and is within recommended specifications.
3. The band strength
A thicker blade is usually more stable and can cut larger and harder materials, but it is also heavier and can wear out more quickly.
A thinner blade is lighter and can cut faster and more accurately, but it's also more prone to damage and can't cut as much material at once.
It is important that the gauge of the bandsaw blade matches the size of the bandsaw and the type of material.
4. The tooth pitch
It is measured in TPI (teeth per inch) and affects cut quality and speed.
A bandsaw blade with a higher tooth pitch has more teeth per inch and typically produces a finer and cleaner cutting surface, but will cut more slowly than a blade with a lower tooth pitch.
A bandsaw blade with a lower tooth pitch has fewer teeth per inch and tends to produce a coarser and rougher cut surface, but it will cut faster than a blade with a higher tooth pitch.
It is important that the tooth pitch of the bandsaw blade is matched to the material and type of cut.
The right choice of a band saw blade
For straight and right-angled cuts, bandsaw blades with wider tooth spacing (eg 4-6 teeth per inch) are suitable. These are robust and can cut through the material quickly and precisely.
For curved and contoured cuts, band saw blades with narrower tooth spacing (eg 10-14 teeth per inch) are better suited. These enable more precise guidance and produce cleaner edges.
A wider range of saw blades with eg 6-14 teeth per inch are suitable for a wider range of applications. They are also suitable for most materials and curved cuts. It is important to note that the material and thickness of the workpiece will also have an impact on which type of bandsaw blade is best suited.
It is always advisable to test different band saw blades and compare the results to get the best possible result.
Correct gearing
Proper toothing is critical for optimal performance when using a bi-metal saw blade. The cross-section of the material should be taken into account when selecting the toothing.
There is the possibility to choose between a standard toothing with a constant tooth pitch or a combination toothing with a variable tooth pitch.
For low-vibration sawing of difficult workpiece dimensions, the use of combination teeth with variable tooth spacing is recommended, as this reduces vibration resonance and protects the saw band.
Gearing recommendation for solid material
The following tables apply to single cuts. If two or more rectangular profiles are machined next to each other, the tables apply, taking into account twice the wall thickness.
If you are looking for high-quality band saw blades, then you have come to Orta e. K. just right! Contact us for more information or to place an order. We are happily looking forward to hearing from you.
Customer satisfaction is very important to us, which is why we ask you to contact us in advance if you have any problems so that we can find a solution for you.
Thanks very much!
We offer the following shipping service providers:
We offer the following payment methods:
Orta eK
Kirchstr. 9
73066 Uhingen
DE353690595
Quality:
We only offer high quality products that stand for durability and reliability. Our products are subject to strict quality controls to ensure they meet the highest standards.
Price-performance ratio:
We offer excellent value for money, making it possible to purchase high quality products at affordable prices.
Expertise:
Our team consists of experienced professionals who have years of experience in the industry and are able to develop individual solutions and constantly improve our products.
environmental awareness:
We attach great importance to ecological and environmentally friendly production methods and thus contribute to a sustainable future. We also deliver with DHL GoGreen!
Customer Service:
Our customer service is always at your disposal and we are always ready to answer your questions and solve problems. We attach great importance to the satisfaction of our customers.
Our team consists of experienced professionals who have years of experience in manufacturing band saw blades.
Due to the close cooperation with our customers and the constant further training of our employees, we are able to develop individual solutions and to constantly improve our products.
Orta eK is a family-run company based in Uhingen, Baden-Württemberg. We have been producing band saw blades of the highest quality in Germany for over 30 years.
Our focus is always on the satisfaction of our customers and the production of durable and reliable tools.
We only use modern machines to meet our high quality standards.We attach great importance to ecological and environmentally friendly production methods.
Our environmental management system is certified and we are actively committed to protecting nature and the environment.
We produce in Germany and thus guarantee high quality.
Our modern manufacturing technology and environmental awareness mean we are able to offer our customers a product that not only meets their needs, but also lives up to our environmental commitments.
We pride ourselves on being able to offer our customers the highest quality band saw blades.
delivery timeen:
We guarantee fast delivery times so that our customers can receive their products as quickly as possible and continue their projects.
GoGreen: Climate-neutral shipping with DHL
Her DHL parcel and DHL Parcels are sent climate-neutral worldwide - at no additional cost to you.