220V PVC Banner Welding Machine Hot Air Welder Machine PVC Welder

• Note: The item is only support 220V voltage. If you need  110V voltage, please contact us.

• Parameters:
  Voltage: AC220V
  Consumed power: 2000W, average power 1500W
  Heating temperature: 750℃
  Adjustable working temperature: 50-600℃
  Heating output temperature: 50-480℃
  Air volume: actual: 40-100, fan voltage display value: 12-28
  Automatic sleep timer: no operation within 15 minutes
  Welding speed (moveable speed, adjustable): 0.8 - 15m/min
  Net Weight: about 12kg
  Dimension: 47x31x32cm

• Application:
  It is widely used for PVC fabric, PE canvas, indoor & outdoor poster banner,  advertisement for booth and plastic surface sailcloth, etc.

• Operation method:
  1. Lay the edges of the two splices of the spray painting surface to be spliced  up and down according to the overlap width of 30-40cm, and fix them with tape or  clamps at the distance between the two ends 40cm from the pressure seam.
  2. Turn on the power button of the hot splicing machine, turn on the temperature  and speed knobs respectively, and set the speed and temperature according to the  thickness of the cloth, the material and the ground conditions, and start to  preheat for about 2 minutes.
  3. Place the machine on the overlap of the ends of the two inkjet splices, and  the rollers are aligned with the edge of the pressure seam.
  4. Move the tail end handle to the left, insert the hot air nozzle into the  inkjet splice and stack the seam layer up and down to start splicing.
  5. After the hot air nozzle is inserted into the gap between the upper and lower  splicing pictures, the machine will start self-propelled. During the crimping  process, you can lightly hold the left handle to control the direction to adjust  the deviation, and make the edge of the upper splice and the inner side of the  nozzle be able to contact.
  6. When the splicing progresses to the end of the screen, move the tail end  handle to the right to lift the hot air nozzle away from the gap between the  upper and lower splices to stop the machine, and you are done.

• Note:
  After finishing the work, in order to protect the electric heating core from  aging prematurely, it is necessary to cool down: raise the hot air head, reset  the temperature adjustment knob to zero, turn off the power button of the  machine after 5 minutes, and stop the fan rotation. In case of a special  situation at work, such as a sudden power failure, you must first raise the hot  air head, and then return the temperature control knob to the zero position, and  then consider the power supply problem.
  

         What  in Package:

         1x 220V PVC Banner Welding Machine Hot Air Welder  Machine PVC Welder

1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3. As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility, meanwhile the customs tax depend on the buyer  local customs office.