eBay

CLOUD-160 rack new 7075 aluminum alloy CNC side panel can be perfectly adapted to DJI O3 air unit New HD digital image transmission lens, we are equipped with TPU lens shock absorption prints on both sides of the lens, the viewing angle is unobstructed when flying, can perfectly record HD video, we are also specially designed for O3 image transmission module with CNC aluminum alloy heat sink, which can better dissipate heat for your image transmission in time.

LHCXRC CLOUD-160 rack parameters:

Model: CLOUD-160

Wheelbase dimensions: 160 mm

Top plate thickness: 2 mm

Base plate thickness: 2 mm

Arm thickness: 4 mm

Flight controller mounting holes: 20mm x 20mm / 25.5 mm x 25.5 mm

Flight controller installation height: 25mm

Mounting holes: 20mm x 20mm / 25.5 mm x 25.5 mm

Motor mounting hole pitch: 16mm X 16mm / 19mm X 19 mm

Camera mounting size: 20mm X 20mm

Suitable blade size: 3.5 inch propeller blade

Dimensions: 195mm x 158 mm x 37 mm

Weight :81g (including 3D print)

Recommended motor: 1804/2004

Recommended flight controller: F411AIO / F722AIO

Recommended battery: 4S-1300

Blade 3520 is recommended

Product features

1. Small size, light weight, good flying feeling

2.9mm x 9mm and 12mm x 12mm motor hole positions can be installed

3. Designed the GOPRO camera base to perfectly mount the GoPro Hero 8 Naked Camera and INSTA 360 GO 2 camera

4. Specially designed for O3 image transmission module, equipped with CNC aluminum alloy heat sink

5. Using 7075 aluminum alloy CNC side plate, it can perfectly adapt to DJI O3 air unit's new high-definition digital image transmission lens

Product List:

 1 x upper plate 2.0mm

 1 x Front bottom plate 2.0mm

 1 x Rear bottom plate 2.0mm

 2 x Front arm 4.0mm

 2 x rear arm 4.0mm

 4 x Textured aluminum pillars M2.5x25

 12 x round head M2.5x5 screws

 4 x round head M2.5x8 screws

 4 x round head M2.5x12 screws

 4 x round head M2x9 screws

 4 x round head M2x18 screws

 8 x pressure rivet nuts M2 (already pressed)

 2 x CNC front aluminum parts

 1 x CNC radiator aluminum parts

 1 x camera shock absorbing 3D print left

 1 x camera shock absorbing 3D print right

 1 x Transmission antenna mounted 3D print

 1 x GPS mounting 3D print

 1 x receiver T-antenna mounted 3D print

 1 x GPRO mounting 3D print (with screws, nuts, screwdrivers)

 1 x battery strip

 1 x Battery non-slip pad

 4 x Arm EVA feet

 1 x Installation instructions

The CLOUD-225 rack arm adopts a wide X design, which has a stable and flexible flight attitude, and is suitable for flexible flying. Quick release design of the arm, easy to replace. The new 7075 aluminum alloy CNC side panel can perfectly adapt to DJI O3 air unit New HD digital image transmission lens, we are equipped with TPU lens shock absorption prints on both sides of the lens, the viewing angle is unobstructed when flying, and can perfectly record high-definition video, we are also specially designed for the O3 image transmission module with CNC aluminum alloy heat sink, which can better dissipate heat for your image transmission in time.

LHCXRC CLOUD-225 rack parameters:

Wheelbase size: 225mm

Top plate thickness: 2.5mm

Base plate thickness: 2.5 mm

Arm thickness: 5mm

Flight controller mounting holes: 20mm x 20mm / 30.5 mm x 30.5 mm

Flight controller installation height: 25mm

Mounting holes: 20mm x 20mm / 25.5 mm x 25.5 mm

Motor mounting hole pitch: 16mm X 16mm / 19mm X 19 mm

Camera mounting size: 20mm X 20mm

Suitable blade size: 5 inch propeller blades

Dimensions: 275mm x 225 mm x 40 mm

Weight :140g±5g (including 3D print)

Recommended motor: 2207/2306

Recommended flight controller: F4 Tower/F7 Tower

Recommended battery: 6S-1300mAh/1500mAh

Recommended propellers: 5136/5226

Product features

1. Arm width X design, stable and flexible flight attitude, suitable for flexible flower flying.

2. Quick disassembly design of the arm, easy to replace.

3.16mm x 16mm and 19mm x 19mm motor hole positions can be installed

4. Designed GOPRO camera dock, perfect installation of GoPro Hero 8 Naked Camera and INSTA 360 GO 2 camera

5. Specially designed for O3 image transmission module, equipped with CNC aluminum alloy heat sink

6. Using 7075 aluminum alloy CNC side panel, it can perfectly adapt to DJI's O3 air unit's new high-definition digital video transmission lens

Product List:

 1 x 2.5mm on the board

 1 x Front bottom plate 2.5mm

 1 x Rear bottom plate 2.5mm

 2 x Front arm 5.0mm

 2 x rear arm 5.0mm

 4 x Textured aluminum pillars M3x25

 12 x round M3x6 screws

 4 x round head M3x9 screws

 4 x round head M3x11 screws

 4 x round head M3x14 screws

 4 x round head M3x28 screws

 4 x Nylon hex nuts M3x3

 8 x pressure rivet nuts M3 (already pressed)