1 Stück / 1 piece M41T81M6E
Serial access real-time clock with alarm
2.0 to 5.5 V clock operating voltage | Ultra-low battery supply current of 0.6 ΜA
(typ at 3 V) | SO-8
package
- Manufacturer: STMicroelectronics
- Package: SO-8
- Product Family:NVRAM
- Counters for tenths/hundredths of seconds,
seconds, minutes, hours, day, date, month,
year, and century
- 32 KHz crystal oscillator integrating load
capacitance (12.5 pF) providing exceptional
oscillator stability and high crystal series
resistance operation
The M41T81 is a low-power serial RTC with a
built-in 32.768 kHz oscillator (external crystal
controlled). Eight bytes of the SRAM are used for
the clock/calendar function and are configured in
binary-coded decimal (BCD) format. An additional
12 bytes of SRAM provide status/control of alarm,
watchdog and square wave functions. Addresses
and data are transferred serially via a two line,
bidirectional I2C interface. The built-in address
register is incremented automatically after each
WRITE or READ data byte.
The M41T81 has a built-in power sense circuit
which detects power failures and automatically
switches to the battery supply when a power
failure occurs. The energy needed to sustain the
SRAM and clock operations can be supplied by a
small lithium button supply when a power failure
occurs.
Functions available to the user include a nonvolatile,
time-of-day clock/calendar, alarm
interrupts, watchdog timer and programmable
square wave output. The eight clock address
locations contain the century, year, month, date,
day, hour, minute, second and tenths/hundredths
of a second in 24-hour BCD format. Corrections
for 28, 29 (leap year - valid until year 2100), 30
and 31 day months are made automatically.
The M41T81 is supplied in an 8-pin SOIC.
8
1
SO8
8-pin SOIC
www.st.
- Counters for tenths/hundredths of seconds,
seconds, minutes, hours, day, date, month,
year, and century
- 32 KHz crystal oscillator integrating load
capacitance (12.5 pF) providing exceptional
oscillator stability and high crystal series
resistance operation
- Serial interface supports I2C bus (400 kHz
protocol)
- Ultra-low battery supply current of 0.6 ΜA
(typ at 3 V)
- 2.0 to 5.5 V clock operating voltage
- Automatic switchover and deselect circuitry (for
3 V application select M41T81S datasheet)
- Power-down time stamp (HT bit) allowing
determination of time elapsed in battery
backup
- Programmable alarm and interrupt function
(valid even during battery backup mode)
- Accurate programmable watchdog timer (from
62.5 ms to 128 s)
- Software clock calibration to compensate
crystal deviation due to temperature
- Operating temperature of –40 to 85 °C
NOT PULLED - NOT USED - NOT REFURBISHED - NOT
SOLDERED - NOT RE-MARKED - NOT FAKED EXCLUSIVELY NEW OLD STOCK (NOS)
AUSSCHLIESSLICH NUR ALTE NEUE WARE (NOS) aus Altlagerbestand
entnommen aus der original Verpackung (siehe Foto)
Bitte fragen sie uns an, falls sie
größere Stückzahlen benötigen oder geben Sie uns hierzu Ihren Preisvorschlag