The heat sink is a device that dissipates heat for the heat-prone electronic components in the electrical appliance. It is mostly made of aluminum alloy, brass or bronze into plates, sheets, and multiple sheets. For example, the CPU processor in a computer needs to use a considerable Heat sinks, power tubes, line tubes in TV sets, and power amplifier tubes in power amplifiers must use heat sinks. Generally, the heat sink should be coated with a layer of thermal grease on the contact surface between the electronic component and the heat sink during use, so that the heat emitted by the component can be more effectively conducted to the heat sink, and then dissipated into the surrounding air through the heat sink.
Product name: radiator, cooling block, cooling strip, cooling fin.
Product color: gold, silver, black
Product Specifications: Multiple Specifications
Product applications: IC circuit boards, motherboards, transistors, MOS tubes, TO-3P high-power tubes, heat sinks, electronic audio amplifiers, modules, power cooling blocks, air-cooled aluminum heat sinks, etc.
Aluminum heat sink TO-220/7805/12 15 * 10 * 16/20/25mm with needle without needle heat sink
Size: width 15 * tooth height 10 * length 16/20/25mm (length can be selected)
Hole position: M3 with threaded hole, hole height 13-18MM
Pin diameter with needle: 1.5mm
Color: Silver white, black
Suitable for cooling IC chips such as TO-220/7805/7812
Features:
♦ It can provide an effective volume for the device to occupy space.
♦ The device junction can be allowed to play to a high temperature.
♦ The power loss of the device can be reduced.
♦ It can improve the environment (the temperature around the device, and the flow rate of the air).
♦ It can provide an effective volume for the device to occupy space.
♦ The device junction can be allowed to play to a high temperature.
♦ The power loss of the device can be reduced.
♦ It can improve the environment (the temperature around the device, and the flow rate of the air).
♦
Compact design
♦
Easy to install
♦
Reduce the risk of hardware failure due to overheating
♦
Made of high quality Aluminum, good thermal conductivity
♦
The fins increase the area of the board and thus provide for greater heat transfer.
♦
Widely used for computer, Power Transistor, Fet, IC, Power Amplifier, Voltage Regulator, Mosfet, Scr etc.
You can find more products in different material, type, color , sizes and shapes in our shop! If you have special needs, please contact us, we can customize according to your needs!
Shipping
