Horizontal Electric Hot Water Cylinder TESY 50L / 80L / 100L / 120L
TESY Horizontal Wall Mounted Electric Water Heater/Cylinder (Un-vented)
The TESY Horizontal Wall Mounted Electric Water Cylinders, from the Bi-Light series are an elegantly styled "un-vented" hot water cylinder that have been developed in conformity with the highest European safety and quality requirements. Manufactured in Europe, the product range offers models with storage capacity ranging from 50 to 120 litres.
Designed to be connected directly to the mains cold water supply, the TESY unvented hot water cylinders provide fast and efficient hot water with low energy consumption with a simple installation. They also include a ceramic glass lining.
The unique design offers an adjustable temperature control to allow the user to select the desired water temperature and high efficiency water heating that are up to 16% more efficient than rival hot water cylinders.
Choose the correct cylinder:
50 Litre - Suitable for 2 People, 3000w Power, 1h 18min Warm Up Time 14 Min Hot Water Run Time, Width 803mm
80 Litre - Suitable for 3 People, 3000w Power, 2h 08min Warm Up Time, 24 Min Hot Water Run Time, Width 855mm
100 Litre - Suitable for 4 People, 3000w Power, 2h 36min Warm Up Time, 27 Min Hot Water Run Time, Width 995mm
120 Litre - Suitable for 5 People, 3000w Power, 3h 08min Warm Up Time, 36 Min Hot Water Run Time, Width 1160mm
The diameter of each Model is 440mm, except the 50 Litre model, this has a diameter of 353mm. Wall mounted (brackets attached, screws NOT included)
SPECIFICATION:
GLASS CERAMIC coating for corrosion protection
ADJUSTABLE TEMPERATURE CONTROL to allow the user to set the desired water temperature
PISTON EFFECT for control of the speed of incoming water to increase the efficiency of the Hot Water heating
INSUTECH - TESY technology for highly efficient insulation, extremely low heat losses, and a thermal bridge between the wall bracket and the cylinder
LIGHT COLOUR Indicator to provide a visual indication that the water is at the designed temperature
ON / OFF switch
FREEZE PROTECTION
TESY Bi-Light cylinders also include a built in thermal cut off switch.
NB. IMPORTANT - Building Control regulations apply when safely installing an un-vented hot water cylinder. The Cylinders are unvented and require a small safety expansion vessel (5-7 litre) and a pressure release valve installing on the pipework in accordance with UK regulations. The Cylinders are required to be wired into fuse spur, they are NOT suitable to be plugged in via a socket (see installation manual for further details).
NB. Important EXTRA DELIVERY CHARGE OF £40.00 TO ALL BT, Isle of Man, Isle of Wight, Ireland, Channel Islands, HS and ZE postcodes. We will contact you after the order to take payment.
If you have any technical questions we are on hand to help at 0161 439 1400
