Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 23 years.

 

We do combined Shipping and send you a refund as soon as we do your orders.

 

If you don't see your Engine listed email me I have sets for most engines. 

PLEASE CHECK FITMENT GUIDE BELOW

We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from US.

 INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

 (Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

FITMENT FOR THIS BEARING KIT   

( 6901/emq ABEC3/c3 ) ID 12mm x OD 24mm x Width 6mm Dimensions

( 689/emq ABEC3/c3 )sealed  ID 9mm x OD 17mm x Width 5mm Dimensions

(NOTE)  MAGNUM POWER PRO  36   Email me to VERIFY FRONT BEARING SIZE

BLUEBIRD 2C  28  
BRAT ALL MODELS  25  
MAGNUM POWER PRO 25  25  
MAGNUM POWER XL 32  32  
NORVEL 25  25  
OS ENGINES F  25  
OS ENGINES F ABC RC W/MFLR  32  
OS ENGINES F RC W/MFLR  28  
OS ENGINES F-F RC  32  
OS ENGINES F-H ABC RC  28  
OS ENGINES F-H RC  32  
OS ENGINES F-H RC W/MFLR  28  
OS ENGINES F-HS RC W/CONE  32  
OS ENGINES F-HX  32  
OS ENGINES F-MX  32  
OS ENGINES FH W/COIL  32  
OS ENGINES FH W/RECOIL  32  
OS ENGINES FS 40S-C  40   (NOTE CAR ? BUGGY ? HELI ? Version)
OS ENGINES FS M RC 4C MARINE  40  
OS ENGINES FSR  25  
OS ENGINES FSRH  28  
OS ENGINES MAX (OLD)  25  
OS ENGINES SF  25  
ROYAL ALL MODELS  28  
ROYAL ALL MODELS  25  
ROYAL ALL MODELS  21  
THUNDER TIGER ENGINES PRO  25   

You are buying (1) SET (2) PREMIUM BEARINGS with installation Instructions .

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR PREMIUM ABEC3/C3 HCHEMQ Chromium Deep Groove Hi Speed Full Metal Cage open bearing (Note) if you want all sealed email before paying. Most engines use open rear bearings.

(1) FRONT PREMIUM ABEC3/C3 HCHEMQ Deep Groove Hi Speed Full Metal Cage Chromium Steel Shielded with high temp Grease, Open or Seal on One Side) True Viton Nitril Rubber Seals Ships Sealed (2) Seals.

Bearing Type & Specs

 (1) Rear ABEC3/C3 Deep Groove Premium Hi RPM Bearing.

Type hchemq high speed Ships Open or sealed on request.

Bearing Material: HC Chromium High Carbon hardened.

Enclosure Open (sealed on request)

RPM Oil (x1000): 30

 (1) Front HCHEMQ ABEC/C3 HC Chromium High RPM , can be run open or sealed on 1 side or both. Ships Sealed.

Thanks again to all our regular and new Customers for our 5 Star Seller Rating.

Engine BEARING Care and storage info.
Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.