Differential Cover or Rear End Inspection Gasket - Silicone

for

CHEVROLET and more

   -   Our silicone rubber gaskets are made from aerospace mechanical 

        grade AMS  silicone and designed to withstand temperatures 

        up to 400 degrees Fahrenheit.   

   -    Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

   -    Our gaskets seal uneven & warped surfaces and eliminate corrosion.

   -    Gaskets are 100% reusable.


FITS:     Chevrolet, Chrysler, Dodge, Ford, 

              GMC Truck, Jeep, Plymouth, Studebaker

              with Dana Spicer 60, 61 and 70 rear end axel

              Years:     1960 - 2014 

                              1966 - 2002  Dana 60,Dodge, Ford

Part #:  RG-51999

Corresponding part #'s:  RD51999; FelPro RDS6095-1;  MRIC-2

One silicone gasket - gasket is 1/8" thick silicone

Reusable.

 

INSTALLATION INSTRUCTIONS:

Wash the cover and mounting surfaces with solvent.  

Remove all traces of oil.

The gasket must be installed DRY  (No oil or lube of any type).

TORQUE to 20 to 25 INCH POUNDS.      

Do not over tighten the gasket!

If the gasket starts to bulge or "pooch" out when tightening 

- then you are over tightening the gasket.  

Back off on the torque.

If the gasket splits or cracks then you have over torqued the 

silicone material and ruined the gasket. 

You must follow the recommended torque listed on the package.   

Tighter is not better.   

It is okay to use Loctite on the bolts.


TO RE-USE GASKET:   

Wash gasket in hot soapy water.    

Rinse gasket well and dry completely.

 Re-install using the above installation instructions. 


PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

USE CORK?    GET REAL!   REAL Gaskets that is…

REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets

for aircraft, automobile, and motorcycle engines.

Our silicone rubber gaskets are made from aerospace mechanical 

grade AMS silicone, designed to withstand temperatures 

up to 400 degrees Fahrenheit and to last the life of the engine. 

Our gaskets seal uneven surfaces, eliminate corrosion and 

are 100% reusable.

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston 

aircraft engines.

Automobiles: Chevrolet, Ford, GM, Mopar, Porsche and VW automobile engines

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, 

Triumph, Saab and most other motorcycle engines.

If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, 

and REAL Gaskets Tennessee is the only place you can get “The Original” 

silicone rubber gasket.


MADE IN THE USA.