Vakker Dental iLed Max II Curing Light 1 Second Cure Lamp 1300-2600mw/c㎡
Note: if you received our Vakker 1 second curing light have charge defective, please tell me, i will replacement new one, and i will pay the return shipping fee. so don't worry your after-sales service, i guarantee we will do the best for me , if you have any question, please let me know, I will reply you in the first time.
Brand: Vakker
Dimensions: 25mm*240mm
Power supply: rechargeable Lithium battery
Battery mode: jw-y-14
Battery voltage and capacity: 3.7V/1400mah
Battery has protection against over-voltage, over-current and short
circult
Adapter
Power Input: 100V to 240V 50HZ/60 Hz
Input Powder:10VA
Power Output: DC5 V/1A
Light source.
5W high power blue light LED
Checking method: the LED light is fine when the light is on during
perating correctly.
The wave length of this product can match with the clinical dental
resin solidification, such as 3M, Dentsply etc.
Wave length: 450nm-455nm
Light intensity: 1300 mw/cm'-2600mw/c㎡
Working condition
Environment temperature: +5℃ to +40℃
Relative humidity: 30%-75%
Atmosphere pressure: 70kpa to106kpa
Equipment safety
Operating mode: intermittent operation
Protection type against electrical shock
Protection degree against electrical shock
Protection against harmful ingress of water or particular matter：
ordinary equipment(IPX0)
Safety in the presence of flammable anesthetic mixture with air,
oxygen or nitrous oxide: not suitable under this condition.
Power supply: rechargeable Lithium battery
Battery mode: jw-y-14
Battery voltage and capacity: 3.7V/1400mah
Battery has protection against over-voltage, over-current and short
circult
Adapter
Power Input: 100V to 240V 50HZ/60 Hz
Input Powder:10VA
Power Output: DC5 V/1A
Light source.
5W high power blue light LED
Checking method: the LED light is fine when the light is on during
perating correctly.
The wave length of this product can match with the clinical dental
resin solidification, such as 3M, Dentsply etc.
Wave length: 450nm-455nm
Light intensity: 1300 mw/cm'-2600mw/c㎡
Working condition
Environment temperature: +5℃ to +40℃
Relative humidity: 30%-75%
Atmosphere pressure: 70kpa to106kpa
Equipment safety
Operating mode: intermittent operation
Protection type against electrical shock
Protection degree against electrical shock
Protection against harmful ingress of water or particular matter：
ordinary equipment(IPX0)
Safety in the presence of flammable anesthetic mixture with air,
oxygen or nitrous oxide: not suitable under this condition.
Install and uninstall way
The top of the un/ can be turned 360 degrees to both left and right
When the battery needs to be charged, connect the plug of the adapter
into the AC100V-240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, then put the main unit into the pedestal
The top of the un/ can be turned 360 degrees to both left and right
When the battery needs to be charged, connect the plug of the adapter
into the AC100V-240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, then put the main unit into the pedestal
Operation
Press the mode button. Following two modes are available
1 TURBO mode:screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.
Normal mode: screen shows P2, Press the time button to select of time
which could be 5,10,15,25 and 30 seconds.
Press the mode button. Following two modes are available
1 TURBO mode:screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.
Normal mode: screen shows P2, Press the time button to select of time
which could be 5,10,15,25 and 30 seconds.
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name: beautyunion2015
Shipping from City, State： Rancho Cucamonga, California,
Contact Information:
Shipping Information: Most items will be posted out the same day from California, if the payment is received before 3:00 PM (PST) | We ship MONDAY-FRIDAY (Except Holidays).
Returns Information: We accept returns within 30 days of receiving the item. Please contact us immediately, prior to leaving feedback so that we can help resolve any issues in a timely manner, to the best of our ability. Return Item/s must be received in the same packaging with ALL Original Contents and Labels that were included.