Inscreed Heating Cable Kit 180w /m2 - Electric Underfloor Heating
inscreed heating cable kits - 180w /m2
Powerful, easy to fit and backed up with a 15-year warranty. Our Electric in-screed underfloor heating cables are ideal for use in new-build properties, extensions and conservatories as a Primary Heat Source, with no radiators required.
All Living Heat floor heating cables are double insulated, fully earthed and designed for both commercial and domestic properties. Our in-screed cable kits are designed to be installed under a 30-75mm floor screed. Once installed virtually any type of floor covering can then be fitted over the screed including tiles, stone, wood, vinyl, laminate or carpet flooring. Suitable for use in all rooms once covered with screed the heating cables are fully protected. If you ever want to change your floor covering your in-screed cables are safe from damage by being protected under your screed.
- For New Builds Or Extensions
- Domestic Or Commercial Installs
- IPX7 Waterproof Rating
- Suitable As Primary Heat / Secondary
- Compatible with all floor coverings
- Can Be Used With HC Decoupling
- Compatible With XPS & Tile Backers
- Can Be Used With Kingspan Or Celotex
- Embed In 50-75mm Concrete Screed
- Free Technical Assistance
- After Sales Support
- Lifetime Guarantee
Kit Comes With T5 Touchscreen Thermostat - Choice of Color WHITE / SILVER / BLACK
T5 Touchscreen Thermostat WHITE
- Easy to use & program
- Manual or Automatic Control
- Child Lock
- Holiday & hold modes
- 7-Day Programmable / 5 + 2 or 7 Days
- 0.5 Degree Accuracy
- Clear back-lit screen
- Battery backup for program settings
- Low-profile design
- Flat mounting and easy to install
- Includes built-in sensor and external sensor
- 16amp / 3600 Watt Max Load
- Responsive Touchscreen operation
- Easy and convenient control of heating
- Fits a standard 1 gang electrical wall box
- A 1-Year manufacturer's warranty
- Floor Temperature Probe included
- Max. temperature range 0 - 75 deg. C
- Default temperature setting range 5 - 35 deg. C
- Help Line
T5 Touchscreen Thermostat SILVER
- Easy to use & program
- Manual or Automatic Control
- Child Lock
- Holiday & hold modes
- 7-Day Programmable / 5 + 2 or 7 Days
- 0.5 Degree Accuracy
- Clear back-lit screen
- Battery backup for program settings
- Low-profile design
- Flat mounting and easy to install
- Includes built-in sensor and external sensor
- 16amp / 3600 Watt Max Load
- Responsive Touchscreen operation
- Easy and convenient control of heating
- Fits a standard 1 gang electrical wall box
- A 1-Year manufacturer's warranty
- Floor Temperature Probe included
- Max. temperature range 0 - 75 deg. C
- Default temperature setting range 5 - 35 deg. C
- Help Line
T5 Touchscreen Thermostat BLACK
- Easy to use & program
- Manual or Automatic Control
- Child Lock
- Holiday & hold modes
- 7-Day Programmable / 5 + 2 or 7 Days
- 0.5 Degree Accuracy
- Clear back-lit screen
- Battery backup for program settings
- Low-profile design
- Flat mounting and easy to install
- Includes built-in sensor and external sensor
- 16amp / 3600 Watt Max Load
- Responsive Touchscreen operation
- Easy and convenient control of heating
- Fits a standard 1 gang electrical wall box
- A 1-Year manufacturer's warranty
- Floor Temperature Probe included
- Max. temperature range 0 - 75 deg. C
- Default temperature setting range 5 - 35 deg. C
- Help Line
Included in this Inscreed Heating KIT
| PRODUCT COMES WITH |
|---|
| Inscreed Heating Cable - 180w/m2 (1 - 34sqm see size options) |
| T5 LCD Touchscreen Thermostat in a choice of 3 great colours - WHITE / SILVER or BLACK |
| Full Fitting Instructions |
Things to know about this product
It is not recommended to install underfloor heating over an un-insulated sub floor, areas without the addition of a minimum 10mm+ insulation layer other wise you may experience slower warm up times. This is especially true under new concrete screeds, (please do not hesitate to contact us for advice on insulation or see our eBay store for suitable insulation).
Our kits are easy to lay and there is no specialist labour or tools required. The only qualified person required is an electrician, who is only required to make the final connection to the mains power. The cables are simply clipped onto the supplied fixing strips, or taped down at the desired spacing and screeded over in the normal way.
Please Note: with larger areas multiple cables may be sent to make up the square meterage of your area.
Inscreed underfloor heating cable has been specifically designed to be used under new screed floors. In screed, cables have many advantages over under tile heating cables. 1: The heating cable has a higher heat output per l/m along with a heavier more robust construction to allow it to easily heat the screed and minimise any chance of damage during installation. 2: Almost any floor covering can be installed once the screed has dried. 3: If the floor covering ever has to be changed or repaired it will not affect the heating system as it is protected under the hard screed layer.
All our in-screed heating cables require no maintenance and are backed up with a full 15-year manufacturer's warranty. All our systems are also suitable for use as the primary heat source, No other heating is required or simple floor warmup/warming. A minimum of 70% floor coverage is recommended @ 170w/m 2 or above for use as a primary heat source when using in screed heating cables. All Living Heat in screed heating systems are supplied at +/- 180w/m2 unless requested otherwise.
If you have any questions or require assistance please feel free to give us a call. One of the team will be happy to help and our advice is always free!
| IN SCREED HEATING CABLE SYSTEM |
|---|
| Easy and quick to lay |
| Life Time warranty |
| Pre-spaced fixing strip/bars provide for added accuracy |
| Ultra thin & durable heating element (Only 2mm deep) |
| Acrylic floor primer |
| TECHNICAL SPECIFICATION |
|---|
| 3m Long cold / connection tails |
| Double insulated and earthed elements |
| Output Rating as per above table |
| Operating Voltage 230/240V 50Hz |
| THERMOSTAT TECHNICAL SPECIFICATION |
|---|
| Supply Voltage 230/240v |
| 16amp / 3600watt max load |
| Temperature Range 5°C - 45°C |
| Extendable 3-15m floor probe |
INSTALLATION & FITTING INSTRUCTIONS
To work out what size kit you require please follow the next 3 steps
1. Measure the total floor area that you wish to be heated. (Less any immovable objects such as bath or kitchen units that you do not want the heating to be fitted under).
2. Take off a 10 cm border around the floor area to be heated as the heating elements should not be run up tight against any walls.
3. This measurement should then be rounded down to the nearest 0.5m, (ie 5.27m2 floor size would be rounded down to a 5m2 kit size). The measurement can be rounded down to the nearest 1m on larger room areas.
FITTING GUIDE
1. Make sure the floor area is level, clean and free of any dust and debris. If laying stone over the surface, the floor should be made ready to receive the flooring before the heating or insulation boards are laid (if required).
1A. If using the fixing bars, Cut and fix the bars 10cm in from the edge of the room, parallel to each other. Only two edges of the room require the bars to be fitted as the wire will run back and forth between these bars. The bars should be fitted to maximize the length of cable down each run. Once fitted the cable can be run back and forth between the bars working its way along the fixing points at the desired intervals to achieve the desired wattage per sqm. Additional bars/tape can be used on long cable runs to maintain equal spacing between runs.
1B. If using only tape, In very awkward areas like round rooms, it may not be possible to fix the fixing bars with ease. To fit the cable in this situation the floor must be first marked out and then the cable taped in place over the pre-marked floor area. To mark the floor the installer should first work out what wattage per sqm is required and thus what length or wattage cable is required. The floor should then be marked to show the desired spacing between cable runs to achieve the desired wattage per sqm over the floor area. The cable can then be taped at the start and end of each run to hold the wire in place so the tiling process can be completed. Once again on long cable runs additional tape can be used to maintain a consistent space between runs.
2. Start by rolling the cable away from where the power source, will be located leaving the cold connection tail ready to be wired in. Then run the mat from this point along the longest straight wall.
3. At the end of this wall, the cable should be turned around to allow it to be run back in the desired direction. See diagrams below.
Living Heat Under Floor Heating In Screed Kits
