LEAD SHEET for weighting Rivarossi
Corrugated–Side (1940’s) Passenger Cars.
LSW078 = 7/8 inch wide ( 27/32nds
x 12 x 0.050± inches thick) ≈ 2.7 ounces
Each
lead sheet is less than 1/16th (0.062) inch thick.
The
long edges of the sheet may have a small ‘burr’ from slitting.
This product is intended for use by experienced modelers.
Although originally intended for the Rivarossi
Corrugated–Side (1940’s) Passenger Cars.
it also fits ALL the other Rivarossi passenger cars (and clones) with great ease!
To use in the Rivarossi 1940's Corrugated-Side Cars:
You may trim
around the rectangular protrusions on the chassis however it is much more practical
to just remove those protrusions.
With a
flush-cut nippers and cut the ribs that are perpendicular to the sides flush
with the long ribs. Then cut a triangle
out of the perpendicular ribs (a relief cut).
This is to prevent distorting the long (stiffener) ribs.
The flush-cut
nippers can then be used to remove the majority of the protruding ribs without deforming
the long stiffener ribs. The chassis may
then be smoothed with a chisel blade and sandpaper.
Then trim the sheet to fit inside the remaining stiffener ribs. The lead sheet is soft and easily cut with regular scissors, or hand-held single hole-punch. Only holes for the screws are needed. (A hole-punch can easily penetrate the lead sheet to make holes.)
As necessary,
the lead may be flattened with a “brayer” roller. A hammer will dent and deform the lead.
Use a liquid
adhesive such as automotive weather stripping adhesive. (Lead sheet is not capable of
‘self-support’.)
I attempt to
provide the most accurate description possible.
My intention
is to prevent any surprises.
WARNING: CHOKING
HAZARD - Small Parts - Not for children under 14 years of age.
Your purchase
will come packed for damage-free inter-planetary shipment
If you have
any questions, PLEASE ask.
Thank you for
looking!
Please leave
a 5-Star review.
Folks, I am struggling to make the shipping work. I just changed the shipping to a flat rate envelope which is good for 2 to 6 packages. One package shipping will be around $6.50 and I will send a refund for the difference from what eBay charges,
LSW078, LSW100, and LSW118 may be combined.
Your package will come USPS Ground Advantage Mail
I will continue to refund excess shipping charges.
Also
Available:
LSW078, LSW100
and LSW118 – Lead Sheet for Weight in passenger and freight cars
Railing3 -
Railing for use on Walkways or on top of vertical cylindrical tanks.
TJ R1 Truck
Jig for Central Valley (plus many other) trucks
TJ V2 Truck
Jig for Kadee Trucks
AHM, IHC, Con-Cor, seating, chair car, Rivarossi interior, detail,
partitions, dining, diner