LORD 406/19 and 406/19GB Fast Setting (4-6 Minute) Temperature Resistant, Non-Sag acrylic adhesives

LORD 406/19 can be used to replace welding, brazing, riveting and other mechanical fastening methods. These adhesives perform particularly well in low-temperature environments and applications that are subject to high impact or high peel loads. LORD 403, 406 and 410 acrylic adhesives provide a range of working times to accommodate a wide variety of process requirements. Fast Setting 6 to 10 minute set time (aka working life) with a fast time to handling strength of 12 to 17 minutes The 'GB' feature is code for Glass Microbead infused, which enables a controlled minimum bondline width. Features and Benefits Versatile“ bonds a wide range of unprepared metals with minimal substrate preparation, as well as engineered thermoplastics including XENOY, polycarbonate, ABS and acrylics. Temperature Resistant performs at temperatures from -40°F to +300° (-40°C to +149°C). Envirnomentally Resistant resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV. Non-Sag remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility. UL Rated when mixed with LORD Accelerator 19, adhesive system is UL 746C certified. Typical Properties Appearance Off-White to Tan Paste Viscosity, cP @ 77°F (25°C) 100,000 – 300,000 Density, lb/gal (kg/m^3) 9.1-9.7 (1090-1162) Flash Point, °F (°C) 59 (15) Typical Properties of Adhesive Mixed w/ Accelerator Mix Ratio by Weight 3.02:1 Mix Ratio by Volume 4:1 Solids Content, % 100 Working Time, min @ 75°F (24°C) 6-10 Time to Handling Strength, min @ 75°F (24°C) 12-17 Mixed Appearance Tan Paste Cured Appearance Tan to Green Typical Cured Properties Tensile Strength at Break, psi (MPa)ASTM D638, modified 4650 (32.1) Elongation, %ASTM D638, modified 30 Young's Modulus, psi (MPa)ASTM D638, modified 130,000 (896.3) Glass Transition Temperature, °F (°C)ASTM E1640-99, by DMA 162 (72)

LORD 406/19 and 406/19GB Fast Setting (4-6 Minute) Temperature Resistant, Non-Sag acrylic adhesives

LORD 406/19 can be uséd to replace welding, brazing, riveting and other mechanical fastening methods. These adhesives perform particularly well in low-temperature environments and applications that are subject to high impact or high peel loads. LORD 403, 406 and 410 acrylic adhesives provide a range of working times to accommodate a wide variety of process requirements.

Fast Setting 6 to 10 minute set time (aka working life)

with a fast time to handling strength of 12 to 17 minutes 

The 'GB' feature is code for Glass Microbead infuséd, which enables a controlled minimum bondline width.

Features and Benefits

  • Versatile“ bonds a wide range of unprepared metals with minimal substrate preparation, as well as engineered thermoplastics including XENOY, polycarbonate, ABS and acrylics.
  • Temperature Resistant performs at temperatures from -40°F to +300° (-40°C to +149°C).
  • Envirnomentally Resistant resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV.
  • Non-Sag remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
  • UL Rated when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.

Typical Properties

Appearance Off-White to Tan Paste
Viscosity, cP @ 77°F (25°C) 100,000 – 300,000
Density, lb/gal (kg/m^3) 9.1-9.7 (1090-1162)
Flash Point, °F (°C) 59 (15)

 

Typical Properties of Adhesive Mixed w/ Accelerator

Mix Ratio by Weight 3.02:1
Mix Ratio by Volume 4:1
Solids Content, % 100
Working Time, min @ 75°F (24°C) 6-10
Time to Handling Strength, min @ 75°F (24°C) 12-17
Mixed Appearance Tan Paste
Cured Appearance Tan to Green

 

Typical Cured Properties

Tensile Strength at Break, psi (MPa)
ASTM D638, modified 		4650 (32.1)
Elongation, %
ASTM D638, modified 		30
Young's Modulus, psi (MPa)
ASTM D638, modified 		130,000 (896.3)
Glass Transition Temperature, °F (°C)
ASTM E1640-99, by DMA 		162 (72)
×
×
×
×
×
×
×
×
×

Shipping info

Click the Shipping & Payments tab above the listing description for more info

Click the Shipping & Payments tab above the listing description for more info!

Additional delivery notes

PICK UP OPTION

Sorry, our items are NOT available for pick-up.

PAYMENT


Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Paying via Direct Deposit

Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.

Additional Information

No additional information at this time

Ask seller a question

To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

Ask seller a question

© Perigee Direct

Click the Shipping & Payments tab above the listing description for more info

Accepted Payment Methods

Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

Thank you for shopping with us on eBay!

Returns are accepted

Items must be returned within 30 days of the auction ending

Buyer will pay for return shipping.