CS-NRI Syntho-Glass UP Pipe Repair Kits For pipe repairs Under Pressure, Pressurized (NSF61 & BS6920 compliant for drinking water contact)
CCS-NRI Syntho-Glass UP Pipe Repair Kits for pipe repairs Under Pressure, Pressurized as high as 60psi without depressurizing The Pressurized, Under-Pressure (UP) repair system was specifically designed for active, pressurized pipe repair applications on copper, steel, SS, PVC, FRP, clay, concrete, and rubber. By combining the original Syntho-Glass® product, with the extremely chemically resistant Syntho-Steel™, and unique Pressure Sealing Rubber Tape, this offers the geometric flexibility to repair joints, tees, couplings, and pinholes. This complete system simplifies the application process and is prepackaged to accommodate pipes up to 10 inches in diameter. Larger repair applications can be engineered to meet your requirements. Syntho-Glass® UP is the originally patented fiberglass pre-impregnated composite that is activated by saltwater or freshwater. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. When used with the appropriate primary sealant, it can repair and reinforce virtually any pipe in minutes. Syntho-Glass® not only restores a pipe to its original pressure rating, it can make the repair area stronger than the original pipe reducing downtime, saving in parts and labor. Syntho-Glass® is a versatile solution for situations in which swift repair is critical. With an initial setting time of only 30 minutes (75°F/24°C), Syntho-Glass® provides superior, rapid repair on copper, steel, stainless steel, PVC, FRP, clay, concrete, and rubber pipe. Designed to be inherently safe, it is nontoxic, noncombustible, and odorless. This repair system also is easy to install. The Syntho-Glass® UP installation kit delivers all the components needed for a repair and arrives on site packaged in a hermetically sealed foil pouch, ready to use without any measuring or mixing. Part Number Wrap Size Width (in) & Length (ft) Pipe Size coverage by wrap UP205 2in x 5ft ½ to 1 in UP309 3in x 9ft 1 ¼ to 2 in UP415 4in x 15ft 2 ½ to 4 in UP430 4in x 30ft 4 ½ to 6 in UP650 6in x 50ft 6 ½ to 10 in Typical Applications Sealing Leaks for pressurized pipes as high as 60 psi (4.1 bar) pressure on joints, tees, couplings, and pinholes.Impact Protection Emergency Repair Corroded Pipes Irregular pipe fittings Force Mains and gravity lines Joint and Tee repair Underwater repair and splash zone Benefits Includes the chemical-resistant Syntho-Steel as a kit component for added system strength Ready to use No mixing or mess Needs no special tools Environmentally safe No VOCs Delivers simple, effective, durable repair/restoration Completely cures in minutes NSF61 compliant BS6920 compliant Approved for for potable water when Syntho-Steel is used as the primary sealant Features for pressurized pipes as high as 60 psi (4.1 bar) pressure on joints, tees, couplings, and pinholes. Supplied as a complete kit Quick and easy installation Excellent adhesion to many substrates Good chemical resistance range Physical Properties VOCs: None Set Time: 30 Minutes at 75°F (24°C) Resin Type: Water-activated polyurethane Resin Application: Pre-impregnated Service Temperature: -50° to 250°F (-45° to 121°C) Service Temperature: Syntho-Glass: -46 do 121°C Syntho-Steel: 46 do 121°C Butyl Tape: 46 do 70°C Application Temperature: 32° to 150°F (0° to 65°C) Pressure once cured w/primary sealant: Max 300 psi (20.6 bar) Test Method Result Tensile Strength ASTM D638 36,000 psi (2482.1 bar) Lap Shear Strength ASTM D5379 900 psi (62.05 bar) Flexural Strength ASTM D790 26,100 psi (1799.53 bar) Dielectric Strength ASTM D149 16,000 Volts Working Time 5 Minutes at 75°F (24°C) Shelf Life 24 months with recommended storage Storage Conditions Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.
CS-NRI Syntho-Glass UP Pipe Repair Kits For pipe repairs Under Pressure, Pressurized (NSF61 & BS6920 compliant for drinking water contact)
CCS-NRI Syntho-Glass UP Pipe Repair Kits for pipe repairs Under Pressure, Pressurized as high as 60psi without depressurizing
The Pressurized, Under-Pressure (UP) repair system was specifically designed for active, pressurized pipe repair applications on copper, steel, SS, PVC, FRP, clay, concrete, and rubber. By combining the original Syntho-Glass® product, with the extremely chemically resistant Syntho-Steel™, and unique Pressure Sealing Rubber Tape, this offers the geometric flexibility to repair joints, tees, couplings, and pinholes. This complete system simplifies the application process and is prepackaged to accommodate pipes up to 10 inches in diameter. Larger repair applications can be engineered to meet your requirements.
Syntho-Glass® UP is the originally patented fiberglass pre-impregnated composite that is activated by saltwater or freshwater. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. When uséd with the appropriate primary sealant, it can repair and reinforce virtually any pipe in minutes. Syntho-Glass® not only restores a pipe to its original pressure rating, it can make the repair area stronger than the original pipe reducing downtime, saving in parts and labor. Syntho-Glass® is a versatile solution for situations in which swift repair is critical. With an initial setting time of only 30 minutes (75°F/24°C), Syntho-Glass® provides superior, rapid repair on copper, steel, stainless steel, PVC, FRP, clay, concrete, and rubber pipe. Designed to be inherently safe, it is nontoxic, noncombustible, and odorless.
This repair system also is easy to install. The Syntho-Glass® UP installation kit delivers all the components needed for a repair and arrives on site packaged in a hermetically sealed foil pouch, ready to use without any measuring or mixing.
Part Number
Wrap Size Width (in) & Length (ft)
Pipe Size coverage by wrap
UP205
2in x 5ft
½ to 1 in
UP309
3in x 9ft
1 ¼ to 2 in
UP415
4in x 15ft
2 ½ to 4 in
UP430
4in x 30ft
4 ½ to 6 in
UP650
6in x 50ft
6 ½ to 10 in
Typical Applications
Sealing Leaks for pressurized pipes as high as 60 psi (4.1 bar) pressure on joints, tees, couplings, and pinholes.Impact Protection
Emergency Repair
Corroded Pipes
Irregular pipe fittings
Force Mains and gravity lines
Joint and Tee repair
Underwater repair and splash zone
Benefits
Includes the chemical-resistant Syntho-Steel as a kit component for added system strength
Approved for for potable water when Syntho-Steel is uséd as the primary sealant
Features
for pressurized pipes as high as 60 psi (4.1 bar) pressure on joints, tees, couplings, and pinholes.
Supplied as a complete kit
Quick and easy installation
Excellent adhesion to many substrates
Good chemical resistance range
Physical Properties
VOCs: None
Set Time: 30 Minutes at 75°F (24°C)
Resin Type: Water-activated polyurethane
Resin Application: Pre-impregnated
Service Temperature: -50° to 250°F (-45° to 121°C)
Service Temperature:
Syntho-Glass: -46 do 121°C
Syntho-Steel: 46 do 121°C
Butyl Tape: 46 do 70°C
Application Temperature: 32° to 150°F (0° to 65°C)
Pressure once cured w/primary sealant: Max 300 psi (20.6 bar)
Test
Method
Result
Tensile Strength
ASTM D638
36,000 psi (2482.1 bar)
Lap Shear Strength
ASTM D5379
900 psi (62.05 bar)
Flexural Strength
ASTM D790
26,100 psi (1799.53 bar)
Dielectric Strength
ASTM D149
16,000 Volts
Working Time
5 Minutes at 75°F (24°C)
Shelf Life
24 months with recommended storage
Storage Conditions
Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.