CS-NRI Syntho-Glass Pipe Repair Kits

Description Syntho-Glass® is the originally patented fiberglass pre-impregnated composite that is activated by saltwater or freshwater. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. When used with the appropriate primary sealant, it can repair and reinforce virtually any pipe in minutes. Syntho-Glass® not only restores a pipe to its original pressure rating, it can make the repair area stronger than the original pipe reducing downtime, saving in parts and labor. Syntho-Glass® is a versatile solution for situations in which swift repair is critical. With an initial setting time of only 30 minutes (75°F/24°C), Syntho-Glass® provides superior, rapid repair on copper, steel, stainless steel, PVC, FRP, clay, concrete, and rubber pipe. Designed to be inherently safe, it is nontoxic, noncombustible, and odorless. This repair system also is easy to install. The Syntho-Glass® installation kit delivers all the components needed for a repair and arrives on site packaged in a hermetically sealed foil pouch, ready to use without any measuring or mixing. Part Number Wrap Size Width (in) & Length (ft) Pipe Size coverage by wrap SG205 2 in x 5 ft ½ to 1 in SG309 3 in x 9 ft 1 ¼ to 2 in SG309i (industrial) 3 in x 9 ft 1 ¼ to 2 in SG415 4 in x 15 ft 2 ½ to 4 in SG420 4 in x 20 ft 4 to 6 in SG430 4 in x 30 ft 4 to 6 in SG450 4 in x 50 ft 4 to 8 in SG820 8 in x 20 ft 8 to 10 in SG830 8 in x 30 ft 12 to 16 in SG850 8 in x 50 ft 12 to 16 in Two Kit Grades: 1) Industrial Grade - Slightly more flexible fiberglass fabric, easier to wrap, and conforms to military specification NSN# 5330-01-242-6187 2) General Purpose - Slightly less flexible, but also less expensive. Typical Applications Impact Protection Emergency Repair Corroded Pipes Irregular pipe fittings Force Mains and gravity lines Joint and Tee repair Underwater repair and splash zone Benefits Ready to use No mixing or mess Needs no special tools Environmentally safe No VOCs Delivers simple, effective, durable repair/restoration Completely cures in minutes Features Supplied as a complete kit Quick and easy installation Excellent adhesion to many substrates Good chemical resistance range Physical Properties VOCs: None Set Time: 30 Minutes at 75°F (24°C) Resin Type: Water-activated polyurethane Resin Application: Pre-impregnated Service Temperature: -50° to 250°F (-45° to 121°C) Application Temperature: 32° to 150°F (0° to 65°C) Pressure once cured w/primary sealant: Max 300 psi (20.6 bar) Working Time 5 Minutes at 75°F (24°C) Shelf Life 24 months with recommended storage Storage Conditions Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.

CS-NRI Syntho-Glass Pipe Repair Kits

Description

Syntho-Glass® is the originally patented fiberglass pre-impregnated composite that is activated by saltwater or freshwater. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. When uséd with the appropriate primary sealant, it can repair and reinforce virtually any pipe in minutes. Syntho-Glass® not only restores a pipe to its original pressure rating, it can make the repair area stronger than the original pipe reducing downtime, saving in parts and labor. Syntho-Glass® is a versatile solution for situations in which swift repair is critical. With an initial setting time of only 30 minutes (75°F/24°C), Syntho-Glass® provides superior, rapid repair on copper, steel, stainless steel, PVC, FRP, clay, concrete, and rubber pipe. Designed to be inherently safe, it is nontoxic, noncombustible, and odorless.

This repair system also is easy to install. The Syntho-Glass® installation kit delivers all the components needed for a repair and arrives on site packaged in a hermetically sealed foil pouch, ready to use without any measuring or mixing.

Part Number	Wrap Size Width (in) & Length (ft)	Pipe Size coverage by wrap
SG205	2 in x 5 ft	½ to 1 in
SG309	3 in x 9 ft	1 ¼ to 2 in
SG309i (industrial)	3 in x 9 ft	1 ¼ to 2 in
SG415	4 in x 15 ft	2 ½ to 4 in
SG420	4 in x 20 ft	4 to 6 in
SG430	4 in x 30 ft	4 to 6 in
SG450	4 in x 50 ft	4 to 8 in
SG820	8 in x 20 ft	8 to 10 in
SG830	8 in x 30 ft	12 to 16 in
SG850	8 in x 50 ft	12 to 16 in

Two Kit Grades:

1) Industrial Grade - Slightly more flexible fiberglass fabric, easier to wrap, and conforms to military specification NSN# 5330-01-242-6187

2) General Purpose - Slightly less flexible, but also less expensive.

Typical Applications

Impact Protection
Emergency Repair
Corroded Pipes
Irregular pipe fittings
Force Mains and gravity lines
Joint and Tee repair
Underwater repair and splash zone

Benefits

Ready to use
No mixing or mess
Needs no special tools
Environmentally safe
No VOCs
Delivers simple, effective, durable repair/restoration
Completely cures in minutes

Features

Supplied as a complete kit
Quick and easy installation
Excellent adhesion to many substrates
Good chemical resistance range

Physical Properties

VOCs: None
Set Time: 30 Minutes at 75°F (24°C)
Resin Type: Water-activated polyurethane
Resin Application: Pre-impregnated
Service Temperature: -50° to 250°F (-45° to 121°C)
Application Temperature: 32° to 150°F (0° to 65°C)
Pressure once cured w/primary sealant: Max 300 psi (20.6 bar)

Working Time

5 Minutes at 75°F (24°C)

Shelf Life

24 months with recommended storage

Storage Conditions

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.