Front/Rear/Left/Right Cameras Quad Way Blind View Split-screen 360° Panoramic Parking Monitoring Driving Assistant Control Box For 12V-24V Cars Truck/Bus/Vans/School Bus/Ambulance/Police car/Construction Vehicles
Front/Rear/Left/Right 4 Channel 360° Panoramic full parking monitoring, remove the visual dead angle around your car. Using advanced split-screen technology, freely switch monitoring position, arbitrary control the vehicles to avoid obstacles. For the current urban parking environment, to solve problem for small parking space easy to scratch.Parking in complex environment
more handy, owners can visually monitor the vehicle parking environment to avoid collision.
Product Advantages:
1. Real-time D1 quality: resolution of 720 * 576
2. Reverse image: can be monitored reverse camera in a big screen in reverse gear
3. Saving power: only provided power to the channel that displayed image
4. Automatic channel recognition: according to accessed camera automatically split screen
5. Trigger single screen display: through the trigger display the corresponding single screen full screen
6. Automatic identification System: Automatically identify accessed cameras are N or P standard
7. Professional anti-interference: the product is more clear and stable, no ripple interference
8. Image normal/ mirror: Each channel can be set as the normal/ mirror
9. Wide voltage: 9-36 wide voltage, car or truck all can be used
10 Device power supply: to the camera power supply
Main Features:
(1) Can be connected at most 4 cameras and automatically split the image screen.
(2) 4-channel cameras can be triggered individually, automatic full-screen display
(3) In the trigger state, no trigger sequence, multiple trigger display multi-screen mode.
(4) Car camera powered by equipment, easy wiring
(5) You can set each channel image normal / mirror function separately
(6) high and low voltage and overload protection
Instructions for use
(1) Trigger line and manual button can choose any one of the 4 way camera image.
(2) In the trigger state, the manual button is valid. When pressing the "QUAD" button of the manual button, the trigger is invalid, and cancel"QUAD" that the trigger is effective
(3) After the trigger is cancelled, the image is delayed by 2 seconds and back to the status before the triggered.
Precautions
When the button on the LED lights flashing constantly, the monitor and camera without power, the main reason:
(1) The input voltage is lower than 9V (please increase the voltage to 12V)
(2) short-circuit (to restart the system after troubleshooting)
When the screen non-stop jumping screen
(1) Check the camera whether has poor connection.
(2) Cancel the auto image mode (Press and hold the "Quad" to power on the host at the same time, the system enables the "田" screen to turn on the power.) Press and hold CH1 to power on the host at the same time, enable standard mode and auto video mode.
