Passenger Car Interior KIT
for IHC / Rivarossi Corrugated-Side (1940's) Coach [ HO ]
Miscellaneous
Railroad Company # 54Coach-RivCS
This interior was designed to fit into the Rivarossi Corrugated-Sided (or Fluted-Side) Coach.
This KIT consists of 2 pieces to create the interior.
(Lead sheet is not included with the kit.)
The two parts have a hidden interlocking system for assembly.
There may be some trimming or filing involved.
Super glue works well for this application, but please heed the warning below.
Utilize a ruler or straight-edge to insure the assembled interior is straight.
Each interior KIT is designed for the specified (model) passenger
car.
The interior KIT accommodates the car’s window and door
placement.
The interior
kits are designed to make your passenger cars LOOK GOOD!
There are notches and holes in the floor to fit around the
various chassis protrusions.
The interior has 27 double seats (54 coach seats) 2
lavatories, and a lounge.
There are no arm-rests on the outside of the interior as they
cannot be seen.
(Arm rests on the outside would reduce the seat width.)
Recommend gluing the separate pieces to the previously installed LSW078 with black automotive weather-stripping adhesive, or similar permanent adhesive.
Please note:
LSW products are not included in the interior kits.
This interior WILL NOT
properly match the Rivarossi Smooth-Side coach window placement.
(Use the 58Coach-RivSS for smooth sided coaches.)
If you are unsure if this will fit your passenger car, observe the chassis floor to determine if this matches you car.
The product
is manufactured from tan aliphatic
polyester resin and can be painted.
Great effort has been taken to provide a pleasing appearance.
The walls are of adequate height so that lighting may be
added.
(Note: the Ravarossi passenger car roofs are not light-proof)
The surface texture has been of great concern; we want to be
the BEST!
The seats are low, so you can see the “passengers” and to allow for the stiffening ribs of the chassis and installation of an LSW078 underneath the interior floor for car weight.
Now you can
see the people instead of their knees.
The
passenger’s feet have to be trimmed, but the appearance from the outside is
great!
Note: Miniature passengers are NOT included with your purchase.
The "Example" pictured is a prototype interior and is slightly different than the production model.
Warning! Do not install the interior in the passenger car sooner than 12
hours after using “Super Glue”.
Cyanoacrylate adhesives release fumes that will attack and mar your
windows and other surfaces.
I attempt to
provide the most accurate description possible.
My intention
is to prevent any surprises.
WARNING: CHOKING
HAZARD - Small Parts - Not for children under 14 years of age.
Your purchase
will come packed for damage-free inter-planetary shipment
If you have
any questions, PLEASE ask.
Thank you for
looking!
Please leave a 5-Star review.
Interiors
currently available:
4RPO-AthSL for Athearn 60ft Stream-Lined RPO Car
12Duplex-RivSS for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car
12Duplex-RivSS-R5
for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car (configured for Day Time
travel)
16Duplex-RivHW for the Rivarossi 85ft Heavy-Weight Duplex Sleeping Car (Includes sleeping people)
22RM-IHCCS for IHC 85ft Corrugated-Side 10-6 Pullman Car
22Rm-IHCSS for IHC 85ft Smooth-Side 10-6 Pullman Car
24Comb-RivHW for the Rivarossi 85ft Heavy-Weight Baggage-Combine Car
25Obs-RivCS
for the IHC / Rivarossi 85ft Corrugated-Side Observation Car
27Obs-AthHW
for the Athearn 72ft Standard Steel (Heavy-Weight) Observation Car
27Pull-RivHW for Rivarossi 85ft Heavy-Weight 12-1 Pullman car
29Obs-IHCCS for the IHC 85ft Corrugated-Side Observation Car (Boat Tail / Premier Series)
32Obs-AthSL for the Athearn 72ft Stream-Lined Observation Car
35Obs-RivSS for the Rivarossi 85ft Smooth-Side Observation Car (Blunt End) (Includes sleeping people)
36Grill-RivCS
for the Rivarossi 85ft Corrugated-Side Grill Car
42Obs-RivHW
for the Rivarossi 85ft Heavyweight (1920’s) Observation Car;
48Diner-ConCS
for the Con-Cor 85ft Corrugated-Side Dining car
48Diner-RivHW
for the Rivarossi 85ft Heavyweight (1920’s) Dining car;
48Diner-RivSS
for the Rivarossi 85ft Smooth-Side (1930’s) Dining car;
52Coach-AthSL
for the Athearn 72ft Stream-Line Coach Car
54Coach-ConCS
for the Con-Cor 85ft Corrugated-Side Passenger car.
54Coach-RivCS
for the Rivarossi 85ft Corrugated-Side (1940’s) Passenger car;
58Coach-RivSS
for the Rivarossi 85ft Smooth Side (1930’s) Passenger car;
60Coach-AthHW
for the Athearn 72ft Standard Steel Coach (Heavy-Weight)
60Coach-RivHW
for the Rivarossi 72ft Heavy Weight (1920’s) passenger Car;
68Coach-IHCHW
for the IHC 85ft Heavyweight Coach (Premier Series)
92Coach-Horizon
for the early Walthers Horizon Coach Commuter car (front & rear facing
seats)
96Coach-Horizon
for the early Walthers Horizon Coach Commuter car (Front facing seats)
Also
Available:
LSW078, LSW100
and LSW118 – Lead Sheet for Weight in passenger and freight cars
Railing3 -
Railing for use on Walkways or on top of vertical cylindrical tanks.
TJ R1 Truck
Jig for Central Valley (plus many other) trucks
TJ V2 Truck
Jig for Kadee Trucks
PLEASE NOTE: Each of our car interiors are made
to fit specific passenger cars as described.
Our interiors
are generic; we are not following a specific prototype railroad floor plan.
We take into
account window placement of the passenger cars and any protrusions or
obstructions inside the specific car.
We strive to
get it right so your cars will look their best.
If you would
like a passenger car interior that we do not have available, please contact me
before purchasing an interior and hoping that it will fit your car.
We are always
open to new product development and ideas.
Thank you,
Eric Haffner
AHM, IHC, Con-Cor, seating, chair car, Rivarossi interior, detail,
partitions, passenger car interior kit