Meter function:
OBD2 mode function: vehicle speed, RPM, voltage, water temperature, clock, instantaneous fuel consumption, average fuel consumption, single driving time, single driving distance, total mileage, driving direction, longitude and latitude, kilometers per liter, intake pressure, oil temperature, air fuel ratio, turbine pressure, intake temperature, oil pressure, throttle valve, engine load, transmission oil temperature, satellite number, altitude, accelerometer G value, up and down slope angle, left and right slope angle, acceleration test, braking test, reading PID data stream, reads car fault codes and clears fault codes.
OBD2 mode alarm: overspeed alarm, RPM alarm, water temperature alarm, voltage alarm, turbine pressure alarm, gearbox oil temperature alarm, oil temperature alarm, oil pressure alarm, slope tilt alarm, fatigue driving alarm, vehicle fault alarm
GPS mode function: vehicle speed, voltage, clock, single driving time, single driving distance, total mileage, driving direction, longitude and latitude, satellite number, altitude, accelerometer G value, up and down slope angle, left and right tilt angle, acceleration test, braking test.
GPS mode alarm: overspeed alarm, voltage alarm, slope inclination alarm, fatigue driving reminder.
Features: OBD2+GPS+Slope Meter+Accelerometer+Ambient Light (Blue Ice Blue Dark Green Green Purple Red Switchable)+12 Language Settings (Simplified Chinese Traditional English Japanese Korean Thai Russian Arabic Malaysian Spanish German French ) + OBD2 mode and GPS mode can be switched on the large screen after booting, no need to enter the background to set.
Attention:
The OBD2 mode are not compatible with following cars:
- European and American cars manufactured before 2008 and Asian cars manufactured before 2008.
- American cars produced before 2008 and all Dodge, JEEP, Sail, Chrysler cars.
- France cars manufactured by FAT,DS,PEUGEOT,Citroen,Renault,Simka, Amirka
- Japanese cars: Suzuki, Mazda, Infiniti (QX50, Q50, Q501), Toyota avanza 2013, Lexus (is250, ex250, ES300H), Honda (jazz, CRV) are not compatible. And all Japanese cars before 2008 are not compatiable.
- Some models of Kia and Hyundai cannot use this OBD2 HUD (2013 Hyundai Sonata, 2017 Kia Soul PS, etc.)
- Oil-electric hybrid and some diesel vehicles cannot use OBD2 HUD, GPS HUD are recommended.
- Pickup Trucks and Modified ECU vehicles are not suitable for this HUD.
If you are not sure the OBD2 mode of this product is suitable for your car or not, please contact us before ordering, thank you!
Installation Steps:
1, Find the car's OBD data interface, usually at the bottom of the original car dashboard.
2, When the engine starts, the instrument is connected to the OBD interface on the car. Then the instrument will automatically read the vehicle data and work normally.
3, OBD line can be collected along the waterproof rubber strip.
4, Secure the meter with the attached double-sided sticker and complete the installation.
Package Included
1 x OBD2+GPS Gauge
1 x OBD2 Type-C cable
1 x Non-Slip Mat
1 x Manual
