5x PPR Aqua-Plus T-pieces for 32mm


All suitable products can be found here in the shop.

You can also use our rental service for scissors and welding guns. We sell or lend the right tool on a daily or weekly basis.

 

About Aqua Plus ...

The Aqua-Plus PPR fittings and pipes are designed for a long service life of up to 50 years at temperatures of up to 90 degrees and operating pressures of up to 26 bar.

The pipe system is intended for cold and warm drinking water pipes and heating pipes. The material is certified by SKZ Germany and DVGW.

 

Advantages of the plastic welding system:

  • One system for heating and drinking water and for hot and cold water.
  • Metal inserts made of brass and suitable for drinking water.
  • Temperatures up to 90 degrees and briefly 110 degrees
  • Maximum pressure up to 26 bar
  • Low water-side friction losses
  • Lower heat loss than other pipe systems
  • Significantly less river noise
  • Short installation times

The Aqua-Plus PPR pipe system is also very popular in agriculture and outside. Where in winter the frost destroys pressed pipes.  

 

The fittings are heated for a few seconds with the PPR welding device and then plugged into one another, after a further 120 seconds cooling time, the connection is established.

The PPR Aquartherm - Fusiotherm welding technology pipe system is therefore one of the BEST and INEXPENSIVE pipe systems for all those who want to produce QUALITY-RELIABLE and SIMPLE installations and repairs IN YOUR OWN.

Please note the manufacturer's information and processing guidelines for the Aqua-Plus pipe system. If you have any questions, please contact us.

More fittings and pipes in our shop !!!

Manufacturer information:

The structure of the material and the smooth surface fabric guarantee low friction losses. This reduces the frictional resistance and causes less pressure drop in the lines. This results in an increased flow rate. More water can flow through with less pressure. Turbulence occurs with conventional lines. This slows down the flow. Another important argument for Aqua Plus is the average lifespan of 50 years. (At 20 to 50 ° C water temperature and a pressure of 6 to 26 bar.) By welding the pipes, the connections are frost-proof. The following standards are met: din 1988 applications for drinking water, dindin 16928 Applications made of thermoplastic materials,din 8076 metal accessories, quality methods,din 16962 PP accessories, erection and testing,din 2999 PP accessories with inner part made of metal,din 8078 Required quality tests, DVS 2206-7 Heat welding of thermoplastic materials

Also called Fusiotherm, Green Pipe Aqua Plus, PPR Pipe

5x PPR Aqua-Plus T-pieces for 32mm All suitable products can be found here in the shop. You can also use our rental service for scissors and welding guns. We sell or lend the right tool on a daily or weekly basis.   About Aqua Plus ...   Advantages of the plastic welding system: One system for heating and drinking water and for hot and cold water. Metal inserts made of brass and suitable for drinking water. Temperatures up to 90 degrees and briefly 110 degrees Maximum pressure up to 26 bar Low water-side friction losses Lower heat loss than other pipe systems Significantly less river noise Short installation times The Aqua-Plus PPR pipe system is also very popular in agriculture and outside. Where in winter the frost destroys pressed pipes.     More fittings and