FILTER, OIL RACING

Hiflo Racing Oil Filter



The new Hiflo Racing oil filters have been developed to meet the high demands of racing.



These special racing filters are the only oil filters tested and certified worldwide by TÜV Süddeutschland.



These filters ensure the highest quality, performance and vehicle compatibility.







Attention: Only tighten the oil filter by hand. The 17mm hex is for disassembly only with the proper tools!



Installation instructions:



- Clean the filter contact surface and lightly lubricate the filter seal and motor seat.



- The 17mm hexagon is only designed to remove the filter. If the hexagon is used for mounting, always observe the correct tightening torque for the vehicle manufacturer''s oil filter and/or the mounting instructions



- The tightening torque must NOT exceed 32 Nm, as this can cause structural damage to the filter housing and therefore oil leakage.



- Start the engine and check the tightness.



- Repeat the test after the engine has reached normal operating temperature.



A safety cable can easily be connected through the hole in the 17mm hexagon, which is mandatory for use on race tracks.



- High performance filter material (triple fibers) for optimum filtration and constant oil flow



- Robust construction; cartridge is steel



- 17 mm hexagon for quick removal



- No special tools are required



- 17mm hexagon with hole for racing safety cable



- The rubber safety valve guarantees 100% safety.



- O-ring for quick assembly before greasing



- Compatible with all types of oils.



- TÜV approved