Visit My eBay Store: RC Engine Bearings


Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to new and regular customers over 23 years on Ebay.

 

If you don't see your Engine listed email me I have sets for most engines. 

PLEASE CHECK FITMENT GUIDE BELOW


We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA.

 INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

 (Included Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I've rebuilt over 800 Model Engines if you need Help just email me.

This listing is for (2) NEW PREMIUM HCEMQ BEARINGS.

Included tips installation Instructions .

ENGINE FITMENT BELOW  

((( 6902 ABEC3/C3 Open or Viton Sealed )))  ID 15mm x OD 28mm x Width 7mm Dimensions

 ((( 608-2RS Viton ABEC3/C3 Sealed )))  ID 8mm x OD 22mm x Width 7mm Dimensions

MDS 58  58  
MDS ALL MODELS  61  
MDS PRO  48  

SAITO ALL MODELS  72  
SAITO FA-65  SAITO GK 65  
SAITO FA-72   

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR ABEC3/C3 Premium Deep Groove High Speed Full Metal Cage open bearing (Note) if you want all sealed email before paying. Most engines use open rear bearings.

(1) FRONT HC ABEC3/C3 Premium Seal Deep Groove High Speed Full Metal Cage HC Chromium Steel with Nitril/Viton Seals with high temp Mobil Polyrex Grease (Options/Fully Sealed , Open or Seal on One Side) Ships Sealed.

In the past most engines just used a shielded front bearing, they leak, let dirt and moisture in, most new engines use these upgraded sealed type.

Bearing Type & Specs

(1) Rear ABEC3/C3 Deep Groove High Speed Bearing EMQ Quality

Type Open (sealed on request)

Bearing Material: High Carbon Steel

Dimension Type: Metric

ID (d): 15

OD (D): 28

Width (B1): 7

Enclosure Open (sealed on request)

RPM Oil (x1000): 30

 (1) Front Premium HC Chromium High RPM SEALED (2) SEALS, can be run open or sealed on 1 side or both.

ut performed all low cost bearings and matched or exceeded the performance of well-known brand name bearings.

Why Settle for Econo or Standard abec1 low grade bearings that are often rough, gritty even new and most likely won't stand the test of time.

Same day or next business day USPS Fast Shipping from Arizona USA.

Thanks again to all our regular and new Customers for our 5 Star Rating.

Engine BEARING Care and storage info.
Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.