220V 3 Channel Tuya WiFi Smart LED Controller Single Color CCT RGB Strip F Alexa
WiFi & RF 3 Channel High Voltage LED Strip Controller ● 3 channel high voltage LED strip controller, can control maximum about 50 meters of high voltage LED strip, different LED strip may have difference. ● 3 in 1 function, used for control RGB, color temperature or single color LED strip. ● Tuya APP cloud control, support on/off, RGB color, color temperature and brightness adjust,delay turn on/off light, timer run, scene edit and music play function. ● Voice control, support for Amazon Alexa, Google Assistant, Tmall Genie and Xiaodu smart speakers. ● Match with RF 2.4G remote control optional. ● User need set light type by press key before Tuya APP network connection and match RF remote of the same light type. ● Each S3(WT) controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF LED controller or RF LED dimming driver synchronously. ● Light on/off fade time 3s selectable. ● Connect with external push key to achieve on/off and 0-100% dimming function. Specification, Input voltage：100-240VAC Input current：3.2A Output voltage：3 x (100-240)VDC Output current：3CH,1A/CH Output power：3 x (100-240)W Input signal：Tuya APP + RF 2.4GHz + Push Dim Dimming gray scale：4096 (2^12) levels Dimming range：0 -100% PWM Frequency：2kHz Size：L178x W150 x H38mm |
 |
 |
 |
 |
 |
Tuya APP network connection Push twice Match/Set key fastly, or when press and hold Match/Set key for 8-12s to set 3 kinds light type: Clear previous network connection, enter Smart config mode, the purple LED indicator flash fastly, the output LED will flash 10 times. Press and hold Match/Set key for 2s: Switch 3 kinds light type in sequence, notice this operation does not automatically clear previous network connection. Press and hold Match key for 5s: Clear previous network connection, enter AP config mode, the purple LED indicator flash slowly. If smart config failed, please try AP config. Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times. If Tuya APP network connection succeed, the purple LED indicator will stop flash, and in Tuya APP, you can find RGB device (or other DIM, CCT) |
 |
Note: 1. Press and hold Match/Set key for 2s, switch 3 kinds light type in sequence. 2. For CCT light type, continuous power on and off will change 3 levels color temperature (WW, NW and CW) in sequence. 3. Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s. AC Push Dim Function (Optional) Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With ever y other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. |
 |
 |
 |
 |
 |
