Description

“TWP10” is a new wah sound created by two peak points.

Traditional wah pedals use a single inductor circuit to boost one specific frequency band (peak point). By moving the pedal, the frequency band to be boosted changes from low to high range, creating the characteristic sound of a wah pedal.

The Twin Peaks wah pedal "TWP10" uses two inductor circuits to boost two peak points, and by moving the pedal, you can change the frequency band.
Furthermore, you can adjust the balance between the two frequency bands and select the variable range between bass and treble modes, creating versatile wah sounds ranging from simple wah sounds to unique wah sounds that sound like modulation effects. can be made.

■Master level knob

Adjust the overall output level.

At the 12 o'clock position, it has the same level as a conventional wah pedal, and when turned fully clockwise, it has a boost level of +6dB.

■Balance control knob

Adjust the mix level and balance of each of the two peak point frequency bands.

The high range side is close to the variable range of a typical conventional wah pedal, and the low range side is close to the variable range used in custom wah pedals and signature wah pedals.

The balance control adjusts the mix level balance between these two frequency bands.

When the knob is in the 0 position (fully turned counterclockwise), only the high range is boosted, and as you turn it clockwise, the low range is gradually boosted.

At the 12 o'clock position, the treble and bass sides are at the same level, and at the full position (full clockwise) only the bass side is boosted.

■Tone mode switch

You can select the variable range of the two boosted frequency bands from HIGH mode or LOW mode.

○HIGH mode: The variable range of the boosted frequency band on the treble side is from 670Hz to 3kHz. This has a higher frequency range than a typical wah pedal, so the tone can be too bright. In that case, we recommend adjusting the balance control or master level, or using your guitar's tone control to suppress the high frequencies. The variable range on the bass side is from 300Hz to 1kHz. This is a slightly lower frequency range than traditional wah pedals.

○LOW mode: The variable range of the boosted frequency band on the treble side is from 450Hz to 2kHz. This is approximately the same frequency range as a traditional wah pedal. The variable range on the bass side is from 220Hz to 750Hz.

■LED indicator

The LED lights when the effect is on. When using batteries, if the LED becomes dim or no longer lights up, replace the batteries.

■Aluminum alloy/die-cast body

The housing is made of die-cast aluminum alloy, which is strong and durable.

■Specs

Controls: Master level, Balance

Switches：Effect on/off, Tone mode (High/Low)

I/O's：Input, Output

Other: True Bypass

Size: 96 (W) x 202 (D) x 60-84 (H) (mm)

Weight：815g (incl.battery)

Required current: 15mA @9V

Power supply：One 9 volt battery or external DC 9 volt AC adapter (center negative)

*When using 9V (006P) battery x 1 or AC adapter, please purchase a 9V/center negative specification separately.

◆Condition: S: New
◆Accessories: Box, instruction manual

Payment

Please pay within 4 days after purchase.

Shipping

Please refer to Shipping and handling.

About other area, please ask me.

Returns

Returns are accepted ONLY if the item was not the item described.

International Buyers - Please Note: 

* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. 
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.