Why are LEDMO outdoor lighting products more expensive than on the market?

Why does LEDMO choose a thick aluminum substrate?

For commercial lighting, the lighting time is very long, and the lamp beads work for a long time

The aluminum substrate inlaid with lamp beads must be thicker, Easier to dissipate heat, and longer in service life,

If you use a thin aluminum substrate, it is difficult to dissipate heat,

which can cause the lamp beads to burn out. parking lot light will fail within a year

You can only replace the entire lamp again, spending more time and money constantly on the same lighting project.

How does LEDMO configure high-quality and high-efficiency drive power for outdoor lights

The power factor is required to be above 0.9.If the power factor is lower than 0.6

it belongs to unqualified or junk products, which not only has a short service life,

but also consumes more electricity than the nominal value,No power saving effect.

At the same time, the current harmonics are also large, and the current is unstable,

It is detrimental to the lamp bead life and the overall lamp life.

The life of the power supply directly affects the overall life of the lamp,

The theoretical of LED lamp beads is greater than 50000 hours,

The service life of the power supply is between 5000 and 30000 hours,

LED lamps cannot ensure product quality and service life without a good driving power supply.

Based on the above knowledge, LEDMO is equipped with instruments and personnel to test and screen the power supply

How does LEDMO choose high-quality lamp beads for outdoor lights for yard?

The key to different quality LED chips is their lifespan,

is determined by light decay.

Low light attenuation, long life, long life and expensive

The chip quality determines the brightness and light decay of the lamp beads.

Good lamp beads not only have high luminous intensity,

And light decay is also small.This can only be verified through time comparison,

After a year of use, the brightness of inferior products began to darken.

The LEDMO team passed repeated screening tests,Retained high-quality lamp bead suppliers

How does LEDMO test screening?

Test the antistatic ability of lamp beads

And leakage current of lamp beads, etc

Lamp beads with strong antistatic capability have a long service life

Only lamp beads with an antistatic capacity greater than 700V are suitable for high-quality lamps

LED lamp beads are unidirectional conductive light emitting bodies. If there is a reverse current,

LED with high leakage current has a short lifespan

Why did LEDMO choose a die cast aluminum housing (frosted texture)?

Updated Engineering PC Lens

1.Different from other' lamps oily finish, our exterior lights are made of the top matte texture finish.

it has no fingerprints when you touch it or any other small bug stays on it.

Keeping your light fixtures always keeps a clean appearance.

2.Heavy-duty die-casting aluminum housing with anti-corrosion bronze finish ensure long-lasting durability

Provide good heat dissipation, durable, and longer service life

Completely waterproof and dustproof, and there is no need to worry about the appearance of the lamps due to rust,

Or the concern that the housing is damaged and the lamp needs to be replaced, applicable to damp and humid places

Updated Engineering PC Lens

Non glare and neighbor friendly LED wall components can always provide stable

and bright white light of 5000K for outdoor safety lighting.

This kind of dusk to dawn outdoor lighting can still maintain fashion after years of use,

without yellowing, and without worrying about aging issues.

Why are LEDMO photocells more sensitive and save electricity?

Compared with the others' plastic photocell sensor, our light fixtures take the copper sensor instead of the cheap sensor.

With the copper sensor, the wall sconce is with higher sensitivity and not easy to break.

Advanced photoelectric sensors provide you with energy saving and intelligent life.

When you drive home at night, you never worry about the darkness outside your garage,

and your monitoring equipment is clearer

Dusk to dawn outdoor lighting offers a great deal of security

and style to your home's immediate outdoor vicinity.

Excellent heat dissipation design

Our engineers and designers have calculated that the aluminum radiator array

and the heat convection hollow structure around the lens maximize heat dissipation efficiency.

The heat sink on the back of the lamp is designed with precise spacing,

and the fin radiator is designed with a die-cast all-aluminum housing

Ensure durability and excellent heat dissipation performance,

with a service life (L70) of up to 80000 hours.

Warm Tips

The importance of selecting high-quality outdoor lights

When it comes to outdoor lighting, you want both your lights and the fixtures to last.

When it comes to outdoor lighting on commercial buildings,

there are many options. But they’re not all created equal.

Some fixtures just aren't made to last. Not only will they look worn out and cheap

after a season or two, they might stop working altogether.

It's smarter to put a little more money into high-quality, contractor-grade lighting fixtures.

Most of these include a significant service, so the risk is low.

● Lower maintenance

Typically, the better the lighting fixtures, the lower the maintenance cost.

High-quality fixtures last longer and look better than those made of cheaper materials.

●Improved light quality

Get a better quality of light is better with the adjustment features

and customization options of high-quality fixtures.