1.Input voltage:power supplied by 2S lithium battery.
【How to install】
1. First of all check accessories to make sure all the parts are included.
2. Use the connect wire to switch the channel of remote control.
3. Connect each light wire to the corresponding socket in control box according to the requirements of control.
4. Stick main control box on the suitable position of the aircraft.
5. Make all the light wires fixed to avoid the interference between light wires and other parts of the aircraft.
6. Fix all the wires and check whether they are set correctly.
【Product mode】
After connecting the wires,enter the operating modes. Through the control of remote control switch
can enter into the 8 operating modes.
Mode 1: Civil aviation standards; the left red light and the right green light are always on, the flashing
lights are flashing in highest speed,the beacon light is flashing in highest speed at a certain
frequency,the landing lights are off or on circularly.
Mode 2: Civil aviation standards; the left red light , the right green light and the flashing lights are flashing
in highest speed at a certain frequency,the beacon light is flashing in highest speed at a
certain frequency,the landing lights are off or on circularly.
Mode 3 and Mode 4:Flash alternately; left side flash two times, right side flash two times, changing
differently.
Mode 5: The left red light, the right green light and the flashing lights are always on, the beacon light is
flashing in highest speed at a certain frequency,the landing lights are off or on circularly.
Mode 6: Emergency forced landing light flashing mode; all the lights are quickly flashing in highest speed
at a certain frequency.
Mode 7: Normal cruise flashing, with all the lights flash slowly.
Mode 8: All the lights are on.
Mode 9: All the lights are off.