Features:
1.This touch sensing river table module uses high-quality materials, which are stable and reliable, easy to install, non heating, and uA level power consumption;
2.The sensing thickness of the barrier is about 3 centimeters (with adjustable sensitivity), and the thinner the barrier, the higher the sensitivity;
3.The maximum load can be connected to any light strip within 5V 2A current;
4.Easy to use, easy to operate, and ready to use when connected and powered on;
5.Wide application range, suitable for various materials: wood, organic glass, acrylic resin, stone, plastic cardboard, etc., not suitable for metal materials.
Parameter:
Working voltage: 4.2V-5.5V
Rated voltage: 5V/2A
Connection method: plug-in
Control method: touch sensing
Working mode: default to synchronous mode (synchronous mode or hold mode adjustable), output when touched, cancel touch and delay for 2 seconds to stop output (delay time adjustable);
Module size: approximately 32 * 20 * 9mm (length * style * thickness);
Attention: The induction ring is made with single stranded copper wire larger than 4 square meters according to your own size, without special requirements. The light strip needs to be equipped with a 5V light strip.
1.This touch sensor river table module is made of high quality materials, stable and reliable, easy to install, no heat, low power consumption;
2. The thickness of the isolation sensor is about 3 cm, the thinner the thickness of the isolation, the higher the sensitivity, every touch, the light will cycle according to the seven colors bright;
3. The maximum load can be connected to the 5V 2A current within the strip, can support 12V, with 12V power supply need to use 12V strip;
4. Easy to use, simple operation, connected to the power can be used;
5. Wide range of application, suitable for a variety of materials: wood plexiglass acrylic resin stone plastic cardboard, etc., does not apply to metal materials.
Product Name:RGB colorful river light module
Trigger mode: touch switch
Input voltage:DC 5V (can support 12V, with 12V power supply need to use 12V strip)
Power supply interface: TYPE-C or XH2.54 3P plug LED lights
Power supply voltage: factory DC 5V (12V power supply, use 12V strip)
Maximum working current of single module:≤120mA
Size: 32mm*21mm*10mm
1.First plug the 2P touch socket into the module;
2. Then connect the 4P RGB LED socket;
3. Then connect the TYPE-C or 3P XH2.54 plug to supply power, the LED light will be slightly bright;
4. Wait for the touch sensor to the light after the high light, leaving the touch range after the light is off, every touch, the light will be according to the color cycle of the seven colors on.
Product name:Round river light module
Trigger mode:Touch switch
Input voltage:DC 5V (can support 12V, 12V power supply need to use 12V strip)
Power supply interface: XH2.54 3P plug
LED lamp power supply voltage: default DC 5V (12V power supply, use 12V strip)
Maximum working current of single module:≤120mA
Size: 40mm*38mm*10mm
Light strip: about 20cm
Usage.
1.Plug the 4P RGB LED strip light socket into the module;
2. Then connect the XH2.54 plug to supply power, the LED light will be slightly bright;
4. Wait for the touch sensor to the light high light, leave the touch range after the light off.
Am 20.12.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: