PHOENIX CONTACT MINI-PS-100-240AC/5DC/3
POWER SUPPLY DIN RAIL MINI POWER
IFS: BOX 10D
- Manufacturer:
Phoenix Contact
- Power
supply unit - MINI-PS-100-240AC/ 5DC/3 - 2938714
- Primary-switched
MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 5 V
DC/3 A
- Width
: 22.5 mm
- Height
: 99 mm
- Depth
: 107 mm
- Degree
of protection : IP20
- Ambient
temperature (operation) : -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
- Ambient
temperature (storage/transport) : -40 °C ... 85 °C
- Max.
permissible relative humidity (operation) : ≤ 95 % (at 25 °C,
non-condensing)
- Noise
immunity : EN 61000-6-2:2005
- Nominal
input voltage range : 100 V AC ... 240 V AC
- Input
voltage range : 85 V AC ... 264 V AC || 90 V DC ... 350 V DC
- AC
frequency range : 45 Hz ... 65 Hz
- Current
consumption : 0.4 A (120 V AC) || 0.2 A (230 V AC) || 0.4 A (90 V DC) ||
0.2 A (350 V DC)
- Inrush
surge current : < 15 A (typical)
- Power
failure bypass : > 30 ms (120 V AC) || > 140 ms (230 V AC)
- Input
fuse : 2 A (slow-blow, internal)
- Choice
of suitable circuit breakers : 6 A ... 16 A (Characteristics B, C, D, K)
- Nominal
output voltage : 5 V DC ±1 %
- Setting
range of the output voltage (USet) : 4.5 V DC ... 5.5 V DC (> 5 V DC,
constant capacity restricted)
- Nominal
output current (IN) : 3 A (-25 °C ... 60 °C)
- POWER
BOOST (IBoost) : 5 A (-25°C ... 40°C permanent )
- Derating
: 60 °C ... 70 °C (2.5%/K)
- Connection
in parallel : Yes, for assembling redundant systems and increasing
efficiency
- Connection
in series : Yes
- Residual
ripple : < 40 mVPP (20 MHz)
- Output
power : 15 W
- Typical
response time : < 1 s
- Peak
switching voltages nominal load : < 100 mVPP (20 MHz)
- Maximum
power dissipation in no-load condition : 1 W
- Power
loss nominal load max. : 5 W
- Net
weight : 0.17 kg
- Operating
voltage display : Green LED
- Efficiency
: > 73 % (for 230 V AC and nominal values)
- Insulation
voltage input/output : 4 kV (type test) || 3 kV (Routine test)
- Protection
class : II (in closed control cabinet)
- MTBF
(IEC 61709, SN 29500) : > 766000 h (40°C)
- Mounting
position : horizontal DIN rail NS 35, EN 60715
- Assembly
instructions : Can be aligned: Horizontally 0 mm, vertically 50 mm
- Connection
method : Pluggable screw connection
- Conductor
cross section solid min. : 0.2 mm²
- Conductor
cross section solid max. : 2.5 mm²
- Conductor
cross section flexible min. : 0.2 mm²
- Conductor
cross section flexible max. : 2.5 mm²
- Conductor
cross section AWG min. : 24
- Conductor
cross section AWG max. : 12
- Stripping
length : 7 mm
- Screw
thread : M3
- Electromagnetic
compatibility : Conformance with EMC Directive 2004/108/EC
- Shock
: 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
- Noise
emission : EN 55011 (EN 55022)
- Noise
immunity : EN 61000-6-2:2005
- Connection
in acc. with standard : CUL
- Standard
- Electrical safety : EN 60950-1/VDE 0805 (SELV)
- Standard
– Electronic equipment for use in electrical power installations and their
assembly into electrical power installations : EN 50178/VDE 0160 (PELV)
- Standard
– Safety extra-low voltage : EN 60950-1 (SELV) || EN 60204 (PELV)
- Standard
- Safe isolation : DIN VDE 0100-410
- Standard
– Limitation of mains harmonic currents : EN 61000-3-2
- UL
approvals : UL/C-UL listed UL 508 || UL/C-UL Recognized UL 60950 || UL
ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous
Location)
- Vibration
(operation) : < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
|| 15 Hz ...150 Hz, 2.3g
- Low
Voltage Directive : Conformance with LV directive 2006/95/EC
- Rail
applications : EN 50121-4
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
OUR SURPLUS
Item will be ship via economy shipping, delivery take about 2 to 5 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL
+++Please read the Terms & Condition before purchase+++
ACCESSORIES
Any accessories, manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED.
INTERNATIONAL BUYER
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying
WARRANTY
Our warranty is valid for 14 days after initial receipt of item.
PAYMENT TERMS
PAYPAL, WIRE TRANSFER TT or Contact Us
RETURN POLICY
-For item condition not as described, defective. Please report to us for replacement or refund within 14 days of receipt.
-Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER.
- All items will ship with our warranty label. If any stickers have been removed or tampered, your refund will be canceled. ]