Passenger Car
Interior KIT for the Rivarossi 85ft Heavy-Weight Duplex Sleeping Car
Miscellaneous Railroad Company 16Duplex-RivHW
This KIT
features 16 duplex two-person compartments, and a lavatory.
Sixteen
double sleeping passengers are included (un-painted).
(Lead sheet
is not included with the kit.)
The “beds”
are the flat rectangles in the compartments.
The lower
level passengers sleep parallel to the car and have a luggage closet (hidden)
The upper
level passengers sleep perpendicular to the car length and have a luggage
shelf.
The KIT has 2
pieces to be glued together to create the interior.
TEST FIT BEFORE GLUEING!!
There may be a little filing, trimming or sanding needed.
“Super Glue”
works well; please read warning below.
Align the parts with a ruler to keep them
straight while gluing.
There are holes in the floor to fit around the
protrusions.
The interior
fits into the duplex sleeper only the correct way.
Paint the interior and the sleeping people and install them
before installation.
The beds are
low, to allow for the installation of an LSW beneath the interior floor for car
weight.
Any standing
passenger’s feet should be trimmed.
LSW078 is
recommended for weight.
(You still
have to mark and punch out the holes for the 3 “lugs” and truck screws.)
Bond the completed interior to the previously installed
LSW078 with automotive weather stripping adhesive.
Interior
length = 10 inches
The project
car has 9 inches of LSW078 installed and weighs 7.9 ounces with Walthers 36inch
wheels in the original trucks.
I attempt to
provide the most accurate description possible.
My intention
is to prevent any surprises.
WARNING: CHOKING
HAZARD - Small Parts - Not for children under 14 years of age.
Your purchase
will come packed for damage-free inter-planetary shipment
If you have
any questions, PLEASE ask.
Thank you for
looking!
Please leave
a 5-Star review.
If you purchase
more than one item from me, I will combine shipping anywhere I safely can, and
refund the difference in shipping cost to you.
Warning! Do not install the
interior in the passenger car sooner than 12 hours after using “Super
Glue”. Cyanoacrylate adhesives release
fumes that will attack and mar your windows and other surfaces.
Interiors currently
available:
12Duplex-RivSS
for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car (Includes sleeping
passengers)
16Duplex-RivHW
for the Rivarossi 85ft Heavy-Weight Duplex Sleeping Car (Includes sleeping people)
24Comb-RivHW
for the Rivarossi 85ft Heavy-Weight Baggage-Combine Car
25Obs-RivCS
for the IHC / Rivarossi 85ft Corrugated-Side Observation Car (Round End)
29Obs-IHCCS
for the IHC 85ft Corrugated-Side Observation Car (Boat Tail / Premier Series)
35Obs-RivSS
for the Rivarossi 85ft Smooth-Side Observation Car (Blunt End) (Includes
sleeping people)
36Grill-RivCS
for the Rivarossi 85ft Corrugated-Side Grill Car (has a 3 seat bar)
42Obs-RivHW
for the Rivarossi 85ft Heavy-Weight (Café, Bar & Lounge) Observation Car.
48Diner-ConCS
for the Con-Cor 85ft Corrugated-Side Dining car
48Diner-RivHW
for the Rivarossi 85ft Heavyweight (1920’s) Dining car;
48Diner-RivSS
for the Rivarossi 85ft Smooth-Side (1930’s) Dining car;
52Coach-AthSL
for the Athearn 72ft Stream-Line Coach Car
54Coach-ConCS
for the Con-Cor 85ft Corrugated-Side Passenger car.
54Coach-RivCS
for the Rivarossi 85ft Corrugated-Side (1940’s) Passenger car;
58Coach-RivSS
for the Rivarossi 85ft Smooth-Side (1930’s) Passenger car;
60Coach-AthHW
for the Athearn 72ft Standard Steel Coach (Heavy-Weight)
60Coach-RivHW
for the Rivarossi 72ft Heavy-Weight (1920’s) passenger Car;
68Coach-IHCHW
for the IHC 85ft Heavyweight Coach (Premier Series)
92Coach-Horizon
for the early Walthers Horizon Coach Commuter car (front & rear facing
seats)
96Coach-Horizon
for the early Walthers Horizon Coach Commuter car (all seats face the front)
We also have:
Coupler-Boss1
and Boss2 to replace the coupler boss on the AHM, Rivarossi, and IHC trucks
LSW078,
LSW100 & LSW118 Lead Sheeting for adding weight to passenger cars or
other rolling stock.
Railing3
- Railing for use on HO Walkways or on top of vertical cylindrical tanks.
S6TP04S
– Rivarossi truck-pin Replacement Screw.
S6TP05S
– Rivarossi truck-pin Replacement Screw.
TJ-R1
Truck Jig for Central Valley and many other brand Trucks
TJ-V2
Truck Jig for Kadee Trucks