Passenger Car Interior KIT for the Athearn 72ft Stream-Lined Coach Car
the Miscellaneous Railroad Company 52Coach-AthSL
The interior features 24 double seats, one
3-passenger seat, and one “Jump seat” for 52 miniature passengers.
The 52Coach-AthSL interior KIT also has 2 lavatories and a “Smoking Lounge”
This
KIT consists of 2 pieces to be glued together to create the interior.
“Super Glue” works well; please heed warning
below.
The product
is manufactured from beige aliphatic
polyester resin and can be painted.
Paint and
populate the interior before installation.
Use care when installing the interior into the car; there are
no tabs to aid in locating.
Be sure that the interior is centered in the car.
The lavatories go on the vestibule end.
Plan for your wiring.
LSW100
is recommended for weight. (Lead sheet
is not included with the kit.)
For
the project car, the standard steel weight was completely removed, and an 8 1/8th
piece of LSW100 was used for weight.
(You still have to mark and punch out the holes for the screws.)
The
LSW100 was glued into the chassis with automotive weather stripping adhesive.
Then bond the completed interior to the
previously installed LSW100.
If you chose to re-use the stock steel weight,
the offset piece must be completely flattened and cut to the appropriate
length. Re-attach with automotive
weather stripping adhesive.
Carefully center the interior in the car as
Athearn cars have no locating pins or lugs.
L = 9 11/16th
in.
PLEASE NOTE:
Each of our car interiors are made to fit specific passenger cars as described.
Our interiors take into account window placement
of the cars, and any protrusions or obstructions inside the specific car.
We strive to get it right so your cars will look
their best.
If you would like a passenger car interior that
we do not have available, please contact me before purchasing an interior and
hoping that it will fit your car.
We are always open to new product ideas.
Thank you, Eric Haffner
Warning! Do not install the interior in the passenger car sooner than 12 hours after using “Super Glue”. Cyanoacrylate adhesives release fumes that will attack and mar your windows and other surfaces.
I attempt to
provide the most accurate description possible.
My intention
is to prevent any surprises.
WARNING: CHOKING
HAZARD - Small Parts - Not for children under 14 years of age.
Your purchase
will come packed for damage-free inter-planetary shipment
If you have
any questions, PLEASE ask.
Thank you for
looking!
Please leave
a 5-Star review.
If you purchase more than one item from me, I will combine shipping anywhere I safely can, and refund the difference in shipping cost to you.
Interiors currently
available:
12Duplex-RivSS
for the Rivarossi 85ft Smooth-Side Duplex Sleeper Car
24Comb-RivHW
for the Rivarossi 85ft Heavy-Weight Baggage-Combine Car
25Obs-RivCS
for the IHC / Rivarossi 85ft Corrugated-Side Observation Car
35Obs-RivSS
for the Rivarossi 85ft Smooth-Side Observation Car (Blunt End)
36Grill-RivCS
for the Rivarossi 85ft Corrugated-Side Grill Car (has a 3 seat bar)
42Obs-RivHW
for the Rivarossi 85ft Heavy-Weight (Café, Bar & Lounge) Observation Car.
48Diner-ConCS
for the Con-Cor 85ft Corrugated-Side Dining car
48Diner-RivHW
for the Rivarossi 85ft Heavyweight (1920’s) Dining car;
48Diner-RivSS
for the Rivarossi 85ft Smooth-Side (1930’s) Dining car;
52Coach-AthSL
for the Athearn 72ft Stream-Line Coach Car
54Coach-ConCS
for the Con-Cor 85ft Corrugated-Side Passenger car.
54Coach-RivCS
for the Rivarossi 85ft Corrugated-Side (1940’s) Passenger car;
58Coach-RivSS
for the Rivarossi 85ft Smooth-Side (1930’s) Passenger car;
60Coach-AthHW
for the Athearn 72ft Standard Steel Coach (Heavy-Weight)
60Coach-RivHW
for the Rivarossi 72ft Heavy-Weight (1920’s) passenger Car;
68Coach-IHCHW
for the IHC 85ft Heavyweight Coach (Premier Series)
92Coach-Horizon
for the early Walthers Horizon Coach Commuter car (rear & front facing
seats)
96Coach-Horizon
for the early Walthers Horizon Coach Commuter car (all seats face the front)
We also have:
Coupler-Boss1
and Coupler-Boss2 to replace the broken coupler boss on the IHC 3-axle trucks
LSW078,
LSW100 & LSW118 Lead Sheeting for
adding weight to passenger cars or other rolling stock.
Railing3
- Railing for use on HO Walkways or on top of vertical cylindrical tanks.
S6TP04S
– Rivarossi truck-pin Replacement Screw.
S6TP05S
– Rivarossi truck-pin Replacement Screw.
TJ-R1
Truck Jig for Central Valley and many other brand Trucks
TJ-V2 Truck Jig for Kadee Trucks
Detail, Seating, Chair car