SRA-4150 ASHLY
SRA Series Amplifiers are advanced, efficient single-space amplifiers perfect for installations with modest power requirements. The SRA Series makes it a snap to get exactly what you need and nothing you don’t.
Housed in a compact single rack space chassis and weighing only 10 lbs, SRA Series Amplifiers are designed to drive 4 or 8 Ohm loads. The 150W models are capable of driving 25V constant voltage lines directly. Switch mode power supplies and Class-D amplifier circuitry provide an extremely power efficient solution. They are convection cooled, so little maintenance is needed after the installation, and no annoying fan noise. Of course, you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly.
Features:
Convection cooling
Extremely low noise
Extensive protection circuitry
Level attenuators for each channel
Signal present and clip alert status LEDs
Selectable input sensitivity
Defeatable 80Hz HPF
Euroblock inputs/outputs
Stereo or bridged mode switch per channel pair
Remote stand-by control
Adjustable turn-on delay up to 8 seconds
Stereo headphone jack (on 2-channel models)
Safety/Compliance: cTUVus, CE, FCC, RoHS
Specifications:
Notes: OdBu = 0.775 VRMS
Frequency Response (8 Ohms): 20Hz-20kHz,il.OdB
Distortion (SMPTE, typical): < 0.5%-8 Ohm load, lOdB below rated power
Distortion (THD-N, typical): < 0.5% -8 Ohm load, lOdB below rated power, 20Hz-20kHz
Damping Factor (8 Ohm load, < 1 kHz): > 200 into 8 Ohms
Input Impedance: 20k Ohms, Balanced
Input Sensitivity: ldBu(75W),4dBu(150W)
Gain: 26dBu, 36dBu, Selectable
Maximum Input Level: +21dBu
HPF: 80Hz 2* Order, defeatable
Cooling: Convection
Output Circuitry: Class D
Amplifier/Load Protection: Output Overcurent, DC Output, Main Supply Rail Over voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
Environmental: 40-120° F, (449° C) non-condensing
Controls: AC Power Switch, Level
Indicators (LEO color): Power (Blue), Standby (Yellow), Protect (Red), Signal (Green), Clip (Red)
80Hz HPF, Gain/Sensitivity: +26dB, +36dB, Bridge/Stereo Switch, Remote Standby, Delay
Connectors (each channel): Input: 3-Pin Euroblock Output: Euroblock
Cordset: 3-PronglEC
Power Requirements: 120VAC, 240VAC ±10%, 50/60Hz (factory set)
Dimensions: 19"W x 1.75'H x 11" D (483mm x 45.5mm x 279.4mm)
Weight: 16lbs
SALE: $1049.99
FREE S&H in continental US (e-mail for international / offshore USA rates)