Why Autel MaxiCOM MK906Pro-TS Is the First Choice of Millions of Mechanics in Auto Repair Shops/ Workshops?

This 2024 newest advanced smart diagnostic tool Autel MaxiCOM MK906Pro-TS is a significant upgrade over MS906Pro-TS/MS906TS/MP808TS to pinpoint car problems quickly & accurately, greatly reducing the repair time and the cost of labor.

Autel MaxiCOM MK906Pro-TS with Dealership-Like Capabilities for Car Repairs Combines: Autel 2024 Diagnostic Scanner + Complete TPMS Functions + Bluetooth Diagnostics

• [Top-Level Complete TPMS Functions, as the Tire Reset/ Programming/ Relearn Tool] Activate/ read/ relearn 99% TPMS sensors in the market, diagnose the whole TPMS modules, program Autel MX-sensors, and perform TPMS module retrofit…
• [Advanced E.CU Cod.ing, Same as MaxiSys MS908SP / MS Elite] Include personalization, modification, refresh hidden features, customization… and compatible with BMW, Porsche, VW, Nissan, Infiniti, Hyundai, Ford, etc.
• [36+ Special Functions, Updating for More] Offer various commonly used resets, calibrations, initializations, and matching… will be continuously growing with updates.
• [Bidirectional Control/Active Tests] Locate problems precisely & fast. Widely used on fuel pumps, interior lights, a/c fan, inside mirrors, adaptive headlamp, steering wheel heating, windows, wash/wipe system, horn, etc.
• [VCI (V200) with CAN FD & DoIP Protocols] Provides super-fast BT diagnostics on CAN FD-& DoIP-equipped vehicles.
• [OE-Level All System Diagnostics] Perform in-depth diagnosis, analysis, and maintenance via reading/erasing codes, data stream in graphs, active tests, and special functions to figure out what’s going on underneath the hooFd!
• [VAG Guided Functions, On-Screen Guidance] Offers on-screen instructions to fast complete some basic settings and matching of the actuators/ sensors without sE.CUrity access codes.
• [10000+ Models & FCA Vehicles after 2018] Compatible with 10000+ models worldwide, covering American, Asian, and European makes and models from 1996 to 2024, Inc. Chrysler FCA model after 2018.
• [Pre & Post-Scans] Tell customers what’s wrong with the car before repairs and prove all DTCs on the pre-scan report are fixed.
• [Print via Wi-Fi] Print diagnostic data/reports directly via Wi-Fi and printer, without the need for a PC.
• [Report Cloud Sharing] Also called Report Management, is a cloud-based comprehensive solution to manage reports, generated by Autel diagnostic tools.
• [Expansion Modules Supported] Compatible with MV105/ MV108/ MP408/ BT506 (Sold Separately) to do in-depth inspections on certain parts.

Advanced E.CU Cod.ing/Replacement Define the Vehicle Styles as You Wish

Same as MK908P / MS908SP / MS Elite, this Autel advanced scanner MK906 Pro-TS supports E.CU Cod.ing to help mechanics/technicians customize cars faster and more sE.CUre than usual, greatly improving work efficiency and meeting customer’s needs.

Online Cod.ing: enable you to access the online data from the OEM server to do high-level repairs, such as online Cod.ing for BMW, for VW, for Porsche, for Nissan, for Nissan-GTR, for Infiniti, for Hyundai, etc.;

Offline Cod.ing/Adaptation: read the code from the original module, and then write the code to the new module, such as adaptation for Ford, for Mazda, etc. Offline Cod.ing for Jaguar, for Vauxhall, for Opel, for Bugatti, for Bentley, for Toyota, for Porsche, for LT3, for Land Rover, for Lexus, etc.

Refresh Hidden Functions: activate the hidden features or disable the annoying features, such as auto side mirrors folding function, automatic engine Start-Stop function, etc. Compatible with BMW, with VW, with Audi, with Skoda, etc.

Component Matching: match/ learn/ initialize adaptive data for certain components after module repairs or replacements.

Modify Cars: help mechanics/technicians modify the cars, like installing car courtesy lights.

NOTE: E.CU Cod.ing is NOT universally compatible with all vehicles, and varies depending on the make, model, and year. Please check compatibility via Message or QA before purchase.

VAG Guided Functions (Only for VAG vehicles)

Designed with VAG guided functions, this Autel diagnostic scanner provides on-screen instructions for you to fast complete some complicated functions and car maintenance step by step, such as the basic setting and matching of the actuators/ sensors without sE.CUrity access code. Compatible with Bentley, with VW, with Audi, with Skoda, with Seat, with Man LD, etc.

Complete TPMS Functions Work as a Professional Tire Reset/ Programming/ Relearn Tool

Upgraded from the MS906 Pro-TS/ MP808TS / MS906TS, Autel TPMS programming tool MK906 Pro-TS, equipped with advanced complete TPMS functions, can work as the professional TPMS toolsTS508/TS608 to check the TPMS module health status and TPMS sensor conditions, turn off the MIL or do TPMS module retrofit, etc. This tire reset tool activates almost all TPMS sensors on the market, programs Autel MX-sensors to replace the broken sensors, and relearns 99% OF TPMS sensors to cars after replacements. What’s more, it can help install TPMS modules on vehicles without TPMS.

• TPMS DiagnosticsCheck the TPMS Module Status: Read/Clear Trouble Codes from TPMS to check the module status and help turn off the light after certain repairs.
• TPMS Sensor ActivationTrigger Almost All Known TPMS Sensors Wirelessly: activate almost all known TPMS sensors (315/433MHz), including the OE sensors, Autel MX-sensors, and other sensors in the market.
• TPMS Sensor Data ReadingCheck the TPMS Sensor Status Quickly: Read the sensor ID, pressure, temperature, battery condition, etc., to help you quickly know what’s wrong with the sensor.
• Autel MX-Sensor ProgrammingReplace TPMS Sensors Fast & Easy: Wirelessly program the Autel MX-sensors (315/433 MHz) to replace the broken TPMS sensors with low batteries. (Only Autel MX-sensors can be programmed by MS906 Pro-TS.)
• 99% TPMS Sensor RelearnHelp Newly Replaced TPMS Sensors Work Properly: Relearn TPMS sensors to the vehicle’s E.CU after changing or rotating tires, or installing new sensors.
• TPMS RetrofitInstall the TPMS Modules on the Cars: help you install the TPMS system to the vehicles without the TPMS by default for safe driving. (Only available for the low configuration car models whose high-end models are installed direct TPMS by default.)
• TPMS by OEM Part No.An efficient method to activate and program MX-Sensors with the sensor’s OEM part number.

36+ Special Functions for Maintenance Continuously Being Updated for More

Autel car diagnostic scanner MK906 Pro-TS provides mechanics/ technicians/ repair shops/ workshops with various daily scheduled maintenance, such as Resets, Relearns, Adaptations, Initializations, Matching, Calibrations, Adjustments, etc. to meet 99% maintenance needs in workshops.

1. Oil Reset: Reset the oil life system.
2. EPB Reset: Help replace and reset the brake pad.
3. TPMS (Indirect) Reset: Reset the tire pressure.
4. BMS Reset: register the battery after replacement.
5. ABS Bleeding: Help exhaust the air in the Anti-lock Braking System (ABS).
6. DPF Regeneration: Remove particulate matter from the DPF filter.
7. Anti-theft Matching: Disable, delete, or match keys. *ONLY for vehicles with low-grade anti-theft systems.
8. Injector Cod.ing: Write the new injector code into the E.CU of the Engine for the correct cylinder injection quantity.
9. SAS Reset: Perform zero calibration for the steering angle sensor to solve the problem of vehicle deviation.
10. Suspension Calibration: Adjust the vehicle body height sensor for level calibration.
11. Other maintenance functions include Throttle Matching, Windows Calibration, Seat Calibration, Odo Reset, Language Change, AFS Reset, Tire Reset, Tooth Learning, ABSSRS (SE.CUrity System Functions), Cylinder Power Balance, VGT Learning, Speed & PTO, Clutch Learning, A/T Learning, Airbag Reset, A/F Reset, VIN, ACC, HV Battery, Transport Mode, A/C, Rain/Light Sensor … (Updating for more)

Note 1: If you enter the vehicle selection, and then system scan, you’ll find far more than 36 special functions in the system diagnostics. The special functions vary by different vehicle makes, models, and years.

Note 2: The 36+ maintenance functions vary depending on the vehicle’s make, model, and year. Please come to us with VIN to check the compatibility before purchase.

Bi-Directional Control (Active Tests) – Precisely Locate Car Issues

The bi-directional control, also called active/actuator tests, enables the Autel intelligent diagnostic tool MK906 Pro-TS to command E.CUs, read the E.CU data, and monitor the operation of the actuators. Through active tests, this Autel bi-directional scanner locates car issues precisely & quickly.

For example:

If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via Autel MK906 Pro-TS scanner you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts.

Active tests are often widely performed, such as:

• Fuel Pump Turn on/off
• A/C Configuration
• Adaptive Headlamp Adjustment
• Window Wipers Setting
• Door Lock Reset
• Sunroof
• Mirrors
• Interior lights, inside mirrors, steering wheel heating, windows, horn, etc.

Note: Bi-directional control is NOT universal for all vehicles. Available tests vary depending on the make, model, and year.

OE-Level All Systems Diagnostics – Check & Repair All Systems with More Special Functions

• OE-Level Diagnostics

Same as the Autel MaxiSys MS909/ms919/Ultra, supported by years of experience and expertise, this Autel car diagnostic tool – Autel MK906Pro-TS works like the OEM scanner to provide professional OE-level diagnostics for all the vehicles worldwide.

• All-System Diagnostics

Unlike the 2-system and 4-system diagnostic tools, this full-system diagnostic tool – MK906Pro-TS can diagnose all available electronic systems in minutes. If you want to diagnose the whole car, including Engine, battery, steering, suspension, audio, or headlamp system…Then, this Autel full-system diagnostic tool MK906Pro-TS is a perfect choice.

It can quickly diagnose Engine System (ENG), Auto Transmission (AT), Anti-lock Brake System (ABS), Electronic Parking Brake (EPB), Battery Manage System (BMS), Tire Pressure Monitoring System (TPMS), Supplemental Restraint System (SRS), Immobilizer (IMMO), Suspension, Cruise Control System, Steering Angle System, Air Conditioning System, Audio System, Body System, Gateway, etc.

• All System Special Functions

In addition to the special functions on the S-ERVICE page, this Autel scanner MK906Pro-TS supports more special functions for the specific modules. After the system scan, you’ll see E.CU Information, Read Codes, Erase Codes, Live Data, Active Tests, Special Functions, etc., where you can get far more than 36+ special functions, such as Injector Quality Adjustment, Erase Ignition FOBIKs, Cam Crank Relearn, E.CU Module Replacement, Self-Adaptive Parameter Reset, Brake Switch Learn, Throttle Valve Learn, ABS Valve Calibration, FFCM Calibration, EGR Valve Replaced, Learn Misfire Adaptive Numerator…

Note: The all-system special functions vary by different makes, models, and years.

Autel All-In-One Scanner---MaxiCOM MK906Pro-TS

• BT Diagnostics with CAN FD/DoIP Protocols: This Bluetooth diagnostic tool MK906Pro-TS comes with the VCI V200, which is compatible with the CAN FD and DoIP Protocols, allowing doing high-speed diagnostics on more new car models, such as Tracker (2021), as Escalade (2021), as CAVALIER (2020-2024), etc.
• Auto VIN & Scan License/VIN: The newly added Scan VIN/Scan License of Autel MK906Pro-TS diagnostic tool helps you identify the vehicle information faster and more precisely by scanning the bar code/VIN/License.
• 13+ Languages: This multilingual car scanner is suitable for automotive mechanics around the world without language obstacles. It supports English, Chinese (Traditional), Spanish, French, German, Russian, Japanese, Korean, Polish, Portuguese, Swedish, Italian, and Dutch. *For language change, pls send S/N (12 digits, on the back of the device) to us.
• Print via Wi-Fi Directly: This Autel newly released diagnostic tool MK906Pro-TS supports the Print via Wi-Fi function, which can print diagnostic data/reports directly via Wi-Fi without a PC. This is much easier & convenient than the original print via PC-Link. Also, it supports the vast majority of printers in the market. * Make sure that the printer and the Autel scanner are in the same local area network.
• 10000+ Vehicles & 1-Year Update (No Charge): This Autel advanced car scanner supports 99% of vehicles (1996-2024), 10000+ car models from the US, Europe, and Asia, including the latest models in 2024. Meantime, it supports 1-year updates at no charge to update for more vehicle models and more features.
• FCA SGW Access: The Autel scanner MK906Pro-TS supports AutoAuth for FCA SGW access, allowing you to clear codes, do bi-directional control (active tests), and perform special functions for Chrysler FCA models after 2018 without special adapters. *AutoAuth account needs to be purchased by yourself and is available in the US, Canada, and Mexico (IP). Compatible with Fiat, with Chrysler, with Alfa Romeo, with Dodge, etc. (From 2018-2024).
• Pre-& Post-Scans: The Autel MK906Pro-TS scan tool supports the pre-scan and post-scan functions to tell customers what’s wrong with the car before repairs and proves which DTCs on the pre-scan report are fixed.
• Compatible with MV105/108 (sold separately): This scanner supports the digital inspection camera–Autel MV105/108 to inspect hard-to-reach areas normally hidden from sight, like the engine, fuel tank...